The Full Wiki

ASCIIbetical: Wikis

Advertisements

Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.

Encyclopedia

Advertisements
(Redirected to ASCII article)

From Wikipedia, the free encyclopedia

The 95 printable ASCII characters, numbered from 32 to 126 (decimal)

The American Standard Code for Information Interchange (acronym: ASCII; pronounced /ˈæski/, ASS-kee)[1] is a character-encoding scheme based on the ordering of the English alphabet. ASCII codes represent text in computers, communications equipment, and other devices that use text. Most modern character-encoding schemes are based on ASCII, though they support many more characters than did ASCII.

US-ASCII is the IANA preferred charset name for ASCII.

Historically, ASCII developed from telegraphic codes. Its first commercial use was as a seven-bit teleprinter code promoted by Bell data services. Work on ASCII formally began October 6, 1960, with the first meeting of the American Standards Association's (ASA) X3.2 subcommittee. The first edition of the standard was published during 1963,[2][3] a major revision during 1967,[4] and the most recent update during 1986.[5] Compared to earlier telegraph codes, the proposed Bell code and ASCII were both ordered for more convenient sorting (i.e., alphabetization) of lists, and added features for devices other than teleprinters.

ASCII includes definitions for 128 characters: 33 are non-printing control characters (now mostly obsolete) that affect how text and space is processed;[6] 94 are printable characters, and the space is considered an invisible graphic.[7] The most commonly used character encoding on the World Wide Web was US-ASCII[8] until December 2007, when it was surpassed by UTF-8.[9][10][11]

Contents

History

US ASCII 1968 Code Chart was structured with two columns of control characters, a column with special characters, a column with numbers, and four columns of letters

The American Standard Code for Information Interchange (ASCII) was developed under the auspices of a committee of the American Standards Association, called the X3 committee, by its X3.2 (later X3L2) subcommittee, and later by that subcommittee's X3.2.4 working group. The ASA became the United States of America Standards Institute or USASI[12] and ultimately the American National Standards Institute.

The X3.2 subcommittee designed ASCII based on earlier teleprinter encoding systems. Like other character encodings, ASCII specifies a correspondence between digital bit patterns and character symbols (i.e. graphemes and control characters). This allows digital devices to communicate with each other and to process, store, and communicate character-oriented information such as written language. Before ASCII was developed, the encodings in use included 26 alphabetic characters, 10 numerical digits, and from 11 to 25 special graphic symbols. To include all these, and control characters compatible with the Comité Consultatif International Téléphonique et Télégraphique standard, Fieldata, and early EBCDIC, more than 64 codes were required for ASCII.

The committee debated the possibility of a shift key function (like the Baudot code), which would allow more than 64 codes to be represented by six bits. In a shifted code, some character codes determine choices between options for the following character codes. It allows compact encoding, but is less reliable for data transmission; an error in transmitting the shift code typically makes a long part of the transmission unreadable. The standards committee decided against shifting, and so ASCII required at least a seven-bit code.[13]

The committee considered an eight-bit code, since eight bits would allow two four-bit patterns to efficiently encode two digits with binary coded decimal. However, it would require all data transmission to send eight bits when seven could suffice. The committee voted to use a seven-bit code to minimize costs associated with data transmission. Since perforated tape at the time could record eight bits in one position, it also allowed for a parity bit for error checking if desired.[14] Machines with octets as the native data type that did not use parity checking typically set the eighth bit to 0.[15]

The code itself was patterned so that most control codes were together, and all graphic codes were together. The first two columns (32 positions) were reserved for control characters.[16] The "space" character had to come before graphics to make sorting algorithms easy, so it became position 0x20.[17] The committee decided it was important to support upper case 64-character alphabets, and chose to pattern ASCII so it could be reduced easily to a usable 64-character set of graphic codes.[18] Lower case letters were therefore not interleaved with upper case. To keep options available for lower case letters and other graphics, the special and numeric codes were arranged before the letters, and the letter 'A' was placed in position 0x41 to match the draft of the corresponding British standard.[19] The digits 0–9 were arranged so they correspond to values in binary prefixed with 011, making conversion with binary-coded decimal straightforward.

Many of the non-alphanumeric characters were positioned to correspond to their shifted position on typewriters. Thus #, $ and % were placed to correspond to 3, 4, and 5 in the adjacent column. The parentheses could not correspond to 9 and 0, however, because the place corresponding to 0 was taken by the space character. Since many European typewriters placed the parentheses with 8 and 9, those corresponding positions were chosen for the parentheses. The @ symbol was not used in continental Europe and the committee expected it would be replaced by an accented À in the French variation, so the @ was placed in position 0x40 next to the letter A.[20]

The control codes felt essential for data transmission were the start of message (SOM), end of address (EOA), end of message (EOM), end of transmission (EOT), "who are you?" (WRU), "are you?" (RU), a reserved device control (DC0), synchronous idle (SYNC), and acknowledge (ACK). These were positioned to maximize the Hamming distance between their bit patterns.[21]

With the other special characters and control codes filled in, ASCII was published as ASA X3.4-1963, leaving 28 code positions without any assigned meaning, reserved for future standardization, and one unassigned control code.[22] It now seems obvious that these positions should have been assigned to the lower case alphabet, but there was some debate at the time whether there should be more control characters instead.[23] The indecision did not last long: during May 1963 the CCITT Working Party on the New Telegraph Alphabet proposed to assign lower case characters to columns 6 and 7,[24] and International Organization for Standardization TC 97 SC 2 voted during October to incorporate the change into its draft standard.[25] The X3.2.4 task group voted its approval for the change to ASCII at its May 1963 meeting.[26] Locating the lowercase letters in columns 6 and 7 caused the characters to differ in bit pattern from the upper case by a single bit, which simplified case-insensitive character matching and the construction of keyboards and printers.

The X3 committee made other changes, including other new characters (the brace and vertical line characters),[27] renaming some control characters (SOM became start of header (SOH)) and moving or removing others (RU was removed).[28] ASCII was subsequently updated as USASI X3.4-1967, then USASI X3.4-1968, ANSI X3.4-1977, and finally, ANSI X3.4-1986 (the first two are occasionally retronamed ANSI X3.4-1967, and ANSI X3.4-1968).

The X3 committee also addressed how ASCII should be transmitted (least significant bit first), and how it should be recorded on perforated tape. They proposed a 9-track standard for magnetic tape, and attempted to deal with some forms of punched card formats.

ASCII itself was first used commercially during 1963 as a seven-bit teleprinter code for American Telephone & Telegraph's TWX (Teletype Wide-area eXchange) network. TWX originally used the earlier five-bit Baudot code, which was also used by the competing Telex teleprinter system. Bob Bemer introduced features such as the escape sequence.[2] His British colleague Hugh McGregor Ross helped to popularize this work—according to Bemer, "so much so that the code that was to become ASCII was first called the Bemer-Ross Code in Europe".[29] Because of his extensive work on ASCII, Bemer has been called "the father of ASCII."[30]

On March 11, 1968, U.S. President Lyndon B. Johnson mandated that all computers purchased by the United States federal government support ASCII, stating:

I have also approved recommendations of the Secretary of Commerce regarding standards for recording the Standard Code for Information Interchange on magnetic tapes and paper tapes when they are used in computer operations. All computers and related equipment configurations brought into the Federal Government inventory on and after July 1, 1969, must have the capability to use the Standard Code for Information Interchange and the formats prescribed by the magnetic tape and paper tape standards when these media are used.[31]

Other international standards bodies have ratified character encodings such as ISO/IEC 646 that are identical or nearly identical to ASCII, with extensions for characters outside the English alphabet and symbols used outside the United States, such as the symbol for the United Kingdom's pound sterling (£). Almost every country needed an adapted version of ASCII since ASCII only suited the needs of the USA and a few other countries. For example, Canada had its own version that supported French characters. Other adapted encodings include ISCII (India), VISCII (Vietnam), and YUSCII (Yugoslavia). Although these encodings are sometimes referred to as ASCII, true ASCII is defined strictly only by ANSI standard.

ASCII was incorporated into the Unicode character set as the first 128 symbols, so the ASCII characters have the same numeric codes in both sets. This allows UTF-8 to be backward compatible with ASCII, a significant advantage.

ASCII control characters

ASCII reserves the first 32 codes (numbers 0–31 decimal) for control characters: codes originally intended not to represent printable information, but rather to control devices (such as printers) that make use of ASCII, or to provide meta-information about data streams such as those stored on magnetic tape. For example, character 10 represents the "line feed" function (which causes a printer to advance its paper), and character 8 represents "backspace". RFC 2822 refers to control characters that do not include carriage return, line feed or white space as non-whitespace control characters.[32] Except for the control characters that prescribe elementary line-oriented formatting, ASCII does not define any mechanism for describing the structure or appearance of text within a document. Other schemes, such as markup languages, address page and document layout and formatting.

The original ASCII standard used only short descriptive phrases for each control character. The ambiguity this caused was sometimes intentional (where a character would be used slightly differently on a terminal link than on a data stream) and sometimes accidental (such as what "delete" means).

Probably the most influential single device on the interpretation of these characters was the ASR-33 Teletype series, which was a printing terminal with an available paper tape reader/punch option. Paper tape was a very popular medium for long-term program storage through the 1980s, less costly and in some ways less fragile than magnetic tape. In particular, the Teletype 33 machine assignments for codes 17 (Control-Q, DC1, also known as XON), 19 (Control-S, DC3, also known as XOFF), and 127 (DELete) became de facto standards. Because the keytop for the O key also showed a left-arrow symbol (from ASCII-1963, which had this character instead of underscore), a noncompliant use of code 15 (Control-O, Shift In) interpreted as "delete previous character" was also adopted by many early timesharing systems but eventually became neglected.

The use of Control-S (XOFF, an abbreviation for transmit off) as a "handshaking" signal warning a sender to stop transmission because of impending overflow, and Control-Q (XON, "transmit on") to resume sending, persists to this day in many systems as a manual output control technique. On some systems Control-S retains its meaning but Control-Q is replaced by a second Control-S to resume output.

Code 127 is officially named "delete" but the Teletype label was "rubout". Since the original standard did not give detailed interpretation for most control codes, interpretations of this code varied. The original Teletype meaning, and the intent of the standard, was to make it an ignored character, the same as NUL (all zeroes). This was useful specifically for paper tape, because punching the all-ones bit pattern on top of an existing mark would obliterate it. Tapes designed to be "hand edited" could even be produced with spaces of extra NULs (blank tape) so that a block of characters could be "rubbed out" and then replacements put into the empty space.

As video terminals began to replace printing ones, the value of the "rubout" character was lost. DEC systems, for example, interpreted "Delete" to mean "remove the character before the cursor," and this interpretation also became common in Unix systems. Most other systems used "Backspace" for that meaning and used "Delete" to mean "remove the character at the cursor". That latter interpretation is the most common now.

Many more of the control codes have been given meanings quite different from their original ones. The "escape" character (code 27), for example, was intended originally to allow sending other control characters as literals instead of invoking their meaning. This is the same meaning of "escape" encountered in URL encodings, C language strings, and other systems where certain characters have a reserved meaning. Over time this meaning has been co-opted and has eventually been changed. In modern use, an ESC sent to the terminal usually indicates the start of a command sequence, usually in the form of a so-called "ANSI escape code" (or, more properly, a "Control Sequence Introducer") beginning with ESC followed by a "[" (left-bracket) character. An ESC sent from the terminal is most often used as an out-of-band character used to terminate an operation, as in the TECO and vi text editors.

The inherent ambiguity of many control characters, combined with their historical usage, created problems when transferring "plain text" files between systems. The best example of this is the newline problem on various operating systems. Teletypes required that a line of text be terminated with both "Carriage Return" and "Linefeed". The first returns the printing carriage to the beginning of the line and the second advances to the next line without moving the carriage. However, requiring two characters to mark the end of a line introduced unnecessary complexity and questions as to how to interpret each character when encountered alone. To simplify matters, plain text files on Unix and Amiga systems use line feeds alone to separate lines. Similarly, older Macintosh systems, among others, use only carriage returns in plain text files. Various DEC operating systems used both characters to mark the end of a line, perhaps for compatibility with teletypes. This de facto standard was copied into CP/M and then into MS-DOS and eventually into Microsoft Windows. Transmission of text over the Internet, for protocols as E-mail and the World Wide Web, uses both characters.

The pre-VMS DEC operating systems, along with CP/M, tracked file length only in units of disk blocks and used Control-Z (SUB) to mark the end of the actual text in the file (also done for CP/M compatibility in some cases in MS-DOS, though MS-DOS 2 added the ability to record exact file lengths and this is usually relied on today). Text strings ending with the null character are known as ASCIZ or C strings.

Binary Oct Dec Hex Abbr PR[t 1] CS[t 2] CEC[t 3] Description
000 0000 000 0 00 NUL ^@ \0 Null character
000 0001 001 1 01 SOH ^A Start of Header
000 0010 002 2 02 STX ^B Start of Text
000 0011 003 3 03 ETX ^C End of Text
000 0100 004 4 04 EOT ^D End of Transmission
000 0101 005 5 05 ENQ ^E Enquiry
000 0110 006 6 06 ACK ^F Acknowledgment
000 0111 007 7 07 BEL ^G \a Bell
000 1000 010 8 08 BS ^H \b Backspace[t 4][t 5]
000 1001 011 9 09 HT ^I \t Horizontal Tab
000 1010 012 10 0A LF ^J \n Line feed
000 1011 013 11 0B VT ^K \v Vertical Tab
000 1100 014 12 0C FF ^L \f Form feed
000 1101 015 13 0D CR ^M \r Carriage return[t 6]
000 1110 016 14 0E SO ^N Shift Out
000 1111 017 15 0F SI ^O Shift In
001 0000 020 16 10 DLE ^P Data Link Escape
001 0001 021 17 11 DC1 ^Q Device Control 1 (oft. XON)
001 0010 022 18 12 DC2 ^R Device Control 2
001 0011 023 19 13 DC3 ^S Device Control 3 (oft. XOFF)
001 0100 024 20 14 DC4 ^T Device Control 4
001 0101 025 21 15 NAK ^U Negative Acknowledgement
001 0110 026 22 16 SYN ^V Synchronous Idle
001 0111 027 23 17 ETB ^W End of Trans. Block
001 1000 030 24 18 CAN ^X Cancel
001 1001 031 25 19 EM ^Y End of Medium
001 1010 032 26 1A SUB ^Z Substitute
001 1011 033 27 1B ESC ^[ \e[t 7] Escape[t 8]
001 1100 034 28 1C FS ^\ File Separator
001 1101 035 29 1D GS ^] Group Separator
001 1110 036 30 1E RS ^^ Record Separator
001 1111 037 31 1F US ^_ Unit Separator
111 1111 177 127 7F DEL ^? Delete[t 9][t 5]
  1. ^ Printable Representation, the Unicode characters from the area U+2400 to U+2421 reserved for representing control characters when it is necessary to print or display them rather than have them perform their intended function. Some browsers may not display these properly.
  2. ^ Control key Sequence/caret notation, the traditional key sequences for inputting control characters. The caret (^) that begins these sequences is not meant to signify the literal ^ character; rather, it represents the "Control" or "Ctrl" key that must be held down while pressing the second key in the sequence. Note that ^^ means Control-Caret (pressing the "Ctrl" and "^" keys), not Control-Control. The caret-key representation is also used by some software to represent control characters.
  3. ^ Character Escape Codes in C programming language and many other languages influenced by it, such as Java and Perl (though not all implementations necessarily support all escape codes).
  4. ^ The Backspace character can also be entered by pressing the "Backspace", "Bksp", or ← key on some systems.
  5. ^ a b The ambiguity of Backspace comes from mismatches between the intent of the human or software transmitting the Backspace and the interpretation by the software receiving it. If the transmitter expects Backspace to erase the previous character and the receiver expects Delete to be used to erase the previous character, many receivers will echo the Backspace as "^H", just as they would echo any other uninterpreted control character. (A similar mismatch in the other direction may yield Delete displayed as "^?".)
  6. ^ The Carriage Return character can also be entered by pressing the "Return", "Ret", "Enter", or key on most systems.
  7. ^ The '\e' escape sequence is not part of ISO C and many other language specifications. However, it is understood by several compilers.
  8. ^ The Escape character can also be entered by pressing the "Escape" or "Esc" key on some systems.
  9. ^ The Delete character can also be entered by pressing the "Delete" or "Del" key. It can also be entered by pressing the "Backspace", "Bksp", or ← key on some systems.

ASCII printable characters

Code 0x20, the space character, denotes the space between words, as produced by the space-bar of a keyboard. The space character is considered an invisible graphic rather than a control character.[7] Codes 0x21 to 0x7E, known as the printable characters, represent letters, digits, punctuation marks, and a few miscellaneous symbols.

Binary Oct Dec Hex Glyph
010 0000 040 32 20
010 0001 041 33 21 !
010 0010 042 34 22 "
010 0011 043 35 23 #
010 0100 044 36 24 $
010 0101 045 37 25 %
010 0110 046 38 26 &
010 0111 047 39 27 '
010 1000 050 40 28 (
010 1001 051 41 29 )
010 1010 052 42 2A *
010 1011 053 43 2B +
010 1100 054 44 2C ,
010 1101 055 45 2D -
010 1110 056 46 2E .
010 1111 057 47 2F /
011 0000 060 48 30 0
011 0001 061 49 31 1
011 0010 062 50 32 2
011 0011 063 51 33 3
011 0100 064 52 34 4
011 0101 065 53 35 5
011 0110 066 54 36 6
011 0111 067 55 37 7
011 1000 070 56 38 8
011 1001 071 57 39 9
011 1010 072 58 3A :
011 1011 073 59 3B ;
011 1100 074 60 3C <
011 1101 075 61 3D =
011 1110 076 62 3E >
011 1111 077 63 3F ?
Binary Oct Dec Hex Glyph
100 0000 100 64 40 @
100 0001 101 65 41 A
100 0010 102 66 42 B
100 0011 103 67 43 C
100 0100 104 68 44 D
100 0101 105 69 45 E
100 0110 106 70 46 F
100 0111 107 71 47 G
100 1000 110 72 48 H
100 1001 111 73 49 I
100 1010 112 74 4A J
100 1011 113 75 4B K
100 1100 114 76 4C L
100 1101 115 77 4D M
100 1110 116 78 4E N
100 1111 117 79 4F O
101 0000 120 80 50 P
101 0001 121 81 51 Q
101 0010 122 82 52 R
101 0011 123 83 53 S
101 0100 124 84 54 T
101 0101 125 85 55 U
101 0110 126 86 56 V
101 0111 127 87 57 W
101 1000 130 88 58 X
101 1001 131 89 59 Y
101 1010 132 90 5A Z
101 1011 133 91 5B [
101 1100 134 92 5C \
101 1101 135 93 5D ]
101 1110 136 94 5E ^
101 1111 137 95 5F _
Binary Oct Dec Hex Glyph
110 0000 140 96 60 `
110 0001 141 97 61 a
110 0010 142 98 62 b
110 0011 143 99 63 c
110 0100 144 100 64 d
110 0101 145 101 65 e
110 0110 146 102 66 f
110 0111 147 103 67 g
110 1000 150 104 68 h
110 1001 151 105 69 i
110 1010 152 106 6A j
110 1011 153 107 6B k
110 1100 154 108 6C l
110 1101 155 109 6D m
110 1110 156 110 6E n
110 1111 157 111 6F o
111 0000 160 112 70 p
111 0001 161 113 71 q
111 0010 162 114 72 r
111 0011 163 115 73 s
111 0100 164 116 74 t
111 0101 165 117 75 u
111 0110 166 118 76 v
111 0111 167 119 77 w
111 1000 170 120 78 x
111 1001 171 121 79 y
111 1010 172 122 7A z
111 1011 173 123 7B {
111 1100 174 124 7C |
111 1101 175 125 7D }
111 1110 176 126 7E ~

Aliases

A June 1992 RFC[33] and the Internet Assigned Numbers Authority registry of character sets[8] recognize the following case-insensitive aliases for ASCII as suitable for use on the Internet:

  • ANSI_X3.4-1968 (canonical name)
  • iso-ir-6
  • ANSI_X3.4-1986
  • ISO_646.irv:1991
  • ASCII (with ASCII-7 and ASCII-8 variants)
  • ISO646-US
  • US-ASCII (preferred MIME name)[8]
  • us
  • IBM367
  • cp367
  • csASCII

Of these, the IANA encourages use of the name "US-ASCII" for Internet uses of ASCII. One often finds this in the optional "charset" parameter in the Content-Type header of some MIME messages, in the equivalent "meta" element of some HTML documents, and in the encoding declaration part of the prologue of some XML documents.

Variants

As computer technology spread throughout the world, different standards bodies and corporations developed many variations of ASCII to facilitate the expression of non-English languages that used Roman-based alphabets. One could class some of these variations as "ASCII extensions", although some misuse that term to represent all variants, including those that do not preserve ASCII's character-map in the 7-bit range.

The PETSCII code Commodore International used for their 8-bit systems is probably unique among post-1970 codes in being based on ASCII-1963, instead of the more common ASCII-1967, such as found on the ZX Spectrum computer. Atari and Galaksija computers also used ASCII variants.

Incompatibility vs interoperability

From early in its development,[34] ASCII was intended to be just one of several national variants of an international character code standard, ultimately published as ISO/IEC 646 (1972), which would share most characters in common but assign other locally-useful characters to several code points reserved for "national use." However, the four years that elapsed between the publication of ASCII-1963 and ISO's first acceptance of an international recommendation during 1967[35] caused ASCII's choices for the national use characters to seem to be de facto standards for the world, causing confusion and incompatibility once other countries did begin to make their own assignments to these code points.

ISO/IEC 646, like ASCII, was a 7-bit character set. It did not make any additional codes available, so the same code points encoded different characters in different countries. Escape codes were defined to indicate which national variant applied to a piece of text, but they were rarely used, so it was often impossible to know what variant to work with and therefore which character a code represented, and text-processing systems could generally cope with only one variant anyway.

Because the bracket and brace characters of ASCII were assigned to "national use" code points that were used for accented letters in other national variants of ISO/IEC 646, a German, French, or Swedish, etc., programmer had to get used to reading and writing
ä aÄiÜ='Ön'; ü
instead of
{ a[i]='\n'; }
C trigraphs were created to solve this problem for ANSI C, although their late introduction and inconsistent implementation in compilers limited their use.

Eventually, as 8-, 16-, and 32-bit computers began to replace 18- and 36-bit computers as the norm, it became common to use an 8-bit byte to store each character in memory, providing an opportunity for extended, 8-bit, relatives of ASCII, with the 128 additional characters providing room to avoid most of the ambiguity that had been necessary in 7-bit codes.

For example, IBM developed 8-bit code pages, such as code page 437, which replaced the control-characters with graphic symbols such as smiley faces, and mapped additional graphic characters to the upper 128 positions. Operating systems such as DOS supported these code-pages, and manufacturers of IBM PCs supported them in hardware. Digital Equipment Corporation developed the Multinational Character Set (DEC-MCS) for use in the popular VT220 terminal.

Eight-bit standards such as ISO/IEC 8859 (derived from the DEC-MCS) and Mac OS Roman developed as true extensions of ASCII, leaving the original character-mapping intact, but adding additional character definitions after the first 128 (i.e., 7-bit) characters. This enabled representation of characters used in a broader range of languages. Because there were several competing 8-bit code standards, they continued to suffer from incompatibilities and limitations. Still, ISO-8859-1 (Latin 1), its variant Windows-1252 (often mislabeled as ISO-8859-1), and the original 7-bit ASCII remain the most common character encodings in use today.

Unicode

Unicode and the ISO/IEC 10646 Universal Character Set (UCS) have a much wider array of characters, and their various encoding forms have begun to supplant ISO/IEC 8859 and ASCII rapidly in many environments. While ASCII is limited to 128 characters, Unicode and the UCS support more characters by separating the concepts of unique identification (using natural numbers called code points) and encoding (to 8-, 16- or 32-bit binary formats, called UTF-8, UTF-16 and UTF-32).

To allow backward compatibility, the 128 ASCII and 256 ISO-8859-1 (Latin 1) characters are assigned Unicode/UCS code points that are the same as their codes in the earlier standards. Therefore, ASCII can be considered a 7-bit encoding scheme for a very small subset of Unicode/UCS, and, conversely, the UTF-8 encoding forms are binary-compatible with ASCII for code points below 128, meaning all ASCII is valid UTF-8. The other encoding forms resemble ASCII in how they represent the first 128 characters of Unicode, but use 16 or 32 bits per character, so they require conversion for compatibility. (similarly UCS-2 is upwards compatible with UTF-16)

Order

Collation of data is sometimes done in ASCII-code order rather than "standard" alphabetical order. The main deviations in ASCII are:

  • Capitals come before lowercase letters, i.e. "Z" before "a"
  • Characters in extended character sets such as "é" come after "z"

The slang expression ASCIIbetical is sometimes used for this order.[36] This ordering can be refined by converting uppercase letters to lowercase before comparing ASCII values, or for more sophisticated purposes, applying a collation map to bring accented characters into the correct positions.

See also

References

  1. ^ Audio pronunciation for ASCII. Merriam Webster. Accessed 2008-04-14.
  2. ^ a b Mary Brandel (July 6, 1999). 1963: The Debut of ASCII: CNN. Accessed 2008-04-14.
  3. ^ American Standard Code for Information Interchange, ASA X3.4-1963, American Standards Association, June 17, 1963
  4. ^ USA Standard Code for Information Interchange, USAS X3.4-1967, United States of America Standards Institute, July 7, 1967
  5. ^ American National Standard for Information Systems — Coded Character Sets — 7-Bit American National Standard Code for Information Interchange (7-Bit ASCII), ANSI X3.4-1986, American National Standards Institute, Inc., March 26, 1986
  6. ^ International Organization for Standardization (December 1, 1975). "The set of control characters for ISO 646". Internet Assigned Numbers Authority Registry. Alternate U.S. version: [1]. Accessed 2008-04-14.
  7. ^ a b Mackenzie, p.223.
  8. ^ a b c Internet Assigned Numbers Authority (May 14, 2007). "Character Sets". Accessed 2008-04-14.
  9. ^ UTF-8 Growth on the Web, World Wide Web Consortium, August 2008
  10. ^ [2] "Google blogo", Majo 2008
  11. ^ [3], "Google blog", January 2010
  12. ^ Mackenzie, p.211.
  13. ^ Decision 4. Mackenzie, p.215.
  14. ^ Decision 5. Mackenzie, p.217.
  15. ^ Sawyer A. Sawyer and Steven George Krantz (January 1, 1995). A Tex Primer for Scientists. CRC Press. ISBN 0-8493-7159-7. p.13.
  16. ^ Decision 8,9. Mackenzie, p.220.
  17. ^ Decision 10. Mackenzie, p.237.
  18. ^ Decision 14. Mackenzie, p.228.
  19. ^ Decision 18. Mackenzie, p.238.
  20. ^ Mackenzie, p.243.
  21. ^ Mackenzie, p.243-245.
  22. ^ Mackenzie, p.66, 245.
  23. ^ Mackenzie, p.435.
  24. ^ Brief Report: Meeting of CCITT Working Party on the New Telegraph Alphabet, May 13-15, 1963.
  25. ^ Report of ISO/TC/97/SC 2 - Meeting of October 29-31, 1963.
  26. ^ Report on Task Group X3.2.4, June 11, 1963, Pentagon Building, Washington, DC.
  27. ^ Report of Meeting No. 8, Task Group X3.2.4, December 17 and 18, 1963
  28. ^ Mackenzie, p.247-8.
  29. ^ Bob Bemer (n.d.). Bemer meets Europe. Trailing-edge.com. Accessed 2008-04-14. Employed at IBM at that time
  30. ^ "Biography of Robert William Bemer". http://www.thocp.net/biographies/bemer_bob.htm. 
  31. ^ Lyndon B. Johnson (March 11, 1968). Memorandum Approving the Adoption by the Federal Government of a Standard Code for Information Interchange. The American Presidency Project. Accessed 2008-04-14.
  32. ^ RFC 2822 (April 2001). "NO-WS-CTL".
  33. ^ RFC 1345 (June 1992).
  34. ^ "Specific Criteria," attachment to memo from R. W. Reach, "X3-2 Meeting -- September 14 and 15," September 18, 1961
  35. ^ R. Maréchal, ISO/TC 97 - Computers and Information Processing: Acceptance of Draft ISO Recommendation No. 1052, December 22, 1967
  36. ^ ASCIIbetical definition. PC Magazine. Accessed 2008-04-14.

Further reading

  • R.W. Bemer, "A Proposal for Character Code Compatibility," Communications of the ACM, Vol. 3. No. 2, February, 1960, pp. 71–72
  • R.W. Bemer, "The Babel of Codes Prior to ASCII: The 1960 Survey of Coded Character Sets: The Reasons for ASCII", May 23, 2003 (from H.J. Smith, Jr., F.A. Williams, "Survey of punched card codes", Communications of the ACM 3, 639 & 642, December 1960)
  • G.S. Robinson & C. Cargill (October 1996). "History and impact of computer standards". Computer Vol. 29, no. 10: pp. 79–85. 
  • American National Standards Institute, et al. (1977). American National Standard Code for Information Interchange. The Institute. 
  • Charles E. Mackenzie (1980). Coded Character Sets, History and Development. Addison-Wesley. ISBN 0201144603. 

External links


Wiktionary

Up to date as of January 14, 2010

Definition from Wiktionary, a free dictionary

English

Adjective

ASCIIbetical (not comparable)

Positive
ASCIIbetical

Comparative
not comparable

Superlative
none (absolute)

  1. (computing) In ASCII order, with uppercase and lowercase letters grouped separately

Related terms

  • asciibetical order

Advertisements






Got something to say? Make a comment.
Your name
Your email address
Message