The Full Wiki

Alkaline earth metal: Wikis

  

Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.

Encyclopedia

From Wikipedia, the free encyclopedia

Group → 2
↓ Period
2 4
Be
3 12
Mg
4 20
Ca
5 38
Sr
6 56
Ba
7 88
Ra

The alkaline earth metals are a series of elements comprising Group 2 (IUPAC style) (Group IIA) of the periodic table: beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba) and radium (Ra). This specific group in the periodic table owes its name to their oxides that simply give basic alkaline solutions. These elements melt at such high temperature that they remain solids (“earths”) in fires. The alkaline earth metals provide a good example of group trends in properties in the periodic table, with well-characterized homologous behavior down the group. With the exception of Be and Mg, the metals have a distinguishable flame color, orange-red for Ca, magenta-red for Sr, green for Ba and crimson red for Ra.

Like other groups, the members of this family show patterns in its electron configuration, especially the outermost shells resulting in trends in chemical behavior:

Z Element No. of electrons/shell
4 Beryllium 2, 2
12 Magnesium 2, 8, 2
20 Calcium 2, 8, 8, 2
38 Strontium 2, 8, 18, 8, 2
56 Barium 2, 8, 18, 18, 8, 2
88 Radium 2, 8, 18, 32, 18, 8, 2

The alkaline earth metals are silver colored, soft metals, which react readily with halogens to form ionic salts, and with water, though not as rapidly as the alkali metals, to form strong alkaline (basic) hydroxides. For example, where sodium and potassium react with water at room temperature, magnesium reacts only with steam and calcium with hot water:

Mg + 2 H2O → Mg(OH)2 + H2

Beryllium is an exception: It does not react with water or steam, and its halides are covalent.

All the alkaline earth metals have two electrons in their valence shell, so the energetically preferred state of achieving a filled electron shell is to lose two electrons to form doubly charged positive ions.

The alkaline earth metals are named after their oxides, the alkaline earths, whose old-fashioned names were beryllia, magnesia, lime, strontia and baryta. These oxides are basic (alkaline) when combined with water. "Earth" is an old term applied by early chemists to nonmetallic substances that are insoluble in water and resistant to heating—properties shared by these oxides. The realization that these earths were not elements but compounds is attributed to the chemist Antoine Lavoisier. In his Traité Élémentaire de Chimie (Elements of Chemistry) of 1789 he called them salt-forming earth elements. Later, he suggested that the alkaline earths might be metal oxides, but admitted that this was mere conjecture. In 1808, acting on Lavoisier's idea, Humphry Davy became the first to obtain samples of the metals by electrolysis of their molten earths.

Contents

Biological occurrences

The alkaline earth metals.
  • Beryllium's low aqueous solubility means it is rarely available to biological systems; it has no known role in living organisms, and when encountered by them, is generally highly toxic.
  • Magnesium and calcium are ubiquitous and essential to all known living organisms. They are involved in more than one role, with, for example, Mg/Ca ion pumps playing a role in some cellular processes, magnesium functioning as the active center in some enzymes, and calcium salts taking a structural role (e.g. bones).
  • Strontium and barium have a lower availability in the biosphere. Strontium plays an important role in marine aquatic life, especially hard corals. They use strontium to build their exoskeleton. These elements have some uses in medicine, for example "barium meals" in radio graphic imaging, whilst strontium compounds are employed in some toothpastes.
  • Radium has a low availability and is highly radioactive, making it toxic to life.


Comparison of the physical properties and chemical properties between alkaline earth and alkali metals

Just like their names, they do not differ completely. The main difference is the electron configuration, which is ns2 for alkaline earth metals and ns1 for alkali metals. For the alkaline earth metals, there are two electrons that are available to for a metallic bond, and the nucleus contains an additional positive charge. Also, the elements of group 2A (alkaline earth) have much higher melting points and boiling points compared to those of group 1A (alkali metals). The alkali also have a softer and more lighweight figure whereas the alkaline earth metals are much harder and denser.

The second valence electron is very important when it comes to comparing chemical properties of the alkaline earth and the alkali metals. The second valence electron is in the same “sublevel” as the first valence electron. Therefore, the Zeff is much greater. This means that the elements of the group 2A contain a smaller atomic radius and much higher ionization energy than the group 1A. Even though the group 2A contains much higher ionization energy, they still form an ionic compound with 2+ cations. Beryllium, however, behaves differently. This is because in order to remove two electrons from this particular atom, it requires significantly more energy. It never forms Be2+ and its bonds are polar covalent.

Beryllium

As mentioned earlier, Be is “special”; it behaves differently. If the Be2+ ion did exist, it would polarize electron clouds that are near it very strongly and would cause extensive orbital overlap, since Be has a high charge density. All compounds that include Be have a covalent bond. Even the compound BeF2 , which is the most ionic Be compound, has a low melting point and a low electrical conductivity when melted.

Important reactions and compounds

Reactions:
Note: E = elements that act as reducing agents
1. The metals reduce halogens to form ionic halides: E(s) + X2 → EX2 (s) where X = F, Cl, Br or I
2. The metals reduce O2 to form the oxides: 2E(s) + O2 → 2EO(s)
3. The larger metals react with water to produce hydrogen gas: E(s) + 2H2O(l) → E2+(aq) + 2OH-aq + H2 (g) where E = Ca, Sr or Ba

Compounds
1. Alkylmagnesium halides (RMgX where R = hydrocarbon group and X = halogen). They are used to synthetise organic compounds.
Here’s an example: 3RMgCl + SnCl4 → 3MgCl2 + R3SnCl
2. Magnesium oxide (MgO). It is used as a material to refract furnace brick and wire insulation (melting point of 2852°C).
3. Calcium carbonate (CaCO3). It’s mainly used in the construction industry. It’s responsible for making limestone, marble, chalk, and coral.

References

Explanation of above periodic table slice:
Alkaline earth metals Atomic numbers in black indicate solids Solid borders indicate primordial elements (older than the Earth) Dashed borders indicate natural radioactive elements with no isotopes older than the Earth

Simple English

The alkaline earth metals are a group of metals on the periodic table. They are related to the Alkali metals, but they do not react as much because they need more energy to remove their two electrons. So they do not have to be stored in petrol. As ions they have a charge of +2. The alkaline earth metals are silvered colored, soft metals, which react readily with halogens to form ionic salts, and with water, though not as rapidly as the alkali metals, to form strongly alkaline (basic) hydroxides.

The alkaline earth metals are: beryllium, magnesium, calcium, strontium, barium, and radium. Radium is radioactive.

[[File:|thumb|The alkaline earth metals]]








Got something to say? Make a comment.
Your name
Your email address
Message