The Full Wiki

Anhedral: Wikis

Advertisements

Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.

Encyclopedia

(Redirected to Dihedral (aircraft) article)

From Wikipedia, the free encyclopedia

For other uses, see Dihedral.
The upward tilt of the wings and tailplane of an aircraft, as seen on this Boeing 737, is called dihedral angle

Dihedral angle is the upward angle from horizontal of the wings or tailplane of a fixed-wing aircraft. Anhedral angle is the name given to negative dihedral angle, that is, when there is a downward angle from horizontal of the wings or tailplane of a fixed-wing aircraft.

Dihedral angle (or anhedral angle) has a strong influence on dihedral effect, which is named after it. Dihedral effect is the amount of roll moment produced per degree (or radian) of sideslip. Dihedral effect is a critical factor in the stability of an aircraft about the roll axis (the spiral mode). It is also pertinent to the nature of an aircraft's dutch roll oscillation and to maneuverability about the roll axis.

Longitudinal dihedral is a comparatively obscure term related to the pitch (flight) axis of an airplane. It is the angle between the zero lift axis of the wing and horizontal tail. Longitudinal dihedral can influence the nature of controllability about the pitch axis and the nature of an aircraft's phugoid-mode oscillation.

When the term "dihedral" (of an aircraft) is used by itself it is usually intended to mean "dihedral angle". However, context may otherwise indicate that 'dihedral effect' is the intended meaning.

Contents

Dihedral angle and dihedral effect

Dihedral angle is the upward angle from horizontal of the wings of a fixed-wing aircraft, or of any paired nominally-horizontal surfaces on any aircraft. The term can also apply to the wings of a bird. Dihedral angle is also used in some types of kites such as box kites. Wings with more than one angle change along the full span are said to be polyhedral.

Dihedral angle has important stabilizing effects on flying bodies because it has a strong influence on the dihedral effect.

Dihedral effect[1] of an aircraft is a rolling moment resulting from the vehicle having a non-zero angle of sideslip. Increasing the dihedral angle of an aircraft increases the dihedral effect on it. However, many other aircraft parameters also have a strong influence on dihedral effect. Some of these important factors are: wing sweep, vertical center of gravity, and the height and size of anything on an aircraft that changes its sideforce as sideslip changes.

Longitudinal dihedral

Dihedral angle on an aircraft almost always implies the angle between two paired surfaces, one on each side of the aircraft. Even then, it is almost always between the left and right wings. However, dihedral in math means the angle between any two planes. So, in aeronautics, in one case, the term "dihedral" is applied to mean the difference in angles between two front-to-back surfaces:

Longitudinal dihedral is the difference between the angle of incidence of the wing and angle of incidence of the horizontal tail.

Longitudinal dihedral can also mean the angle between the zero lift axis of the two surfaces instead of between the root chords of the two surfaces. This is the more meaningful usage because the directions of zero-lift are pertinent to longitudinal trim and stability while the directions of the root chords are not.

History

In geometry, dihedral angle is the angle between two planes. Aviation usage differs slightly from usage in geometry. In aviation, the usage "dihedral" evolved to mean the positive, up angle between the left and right wings. While usage with the prefix "an-" (as in "anhedral") evolved to mean the negative, down angle between the wings.

The aerodynamic stabilizing qualities of dihedral angle were first described by Sir George Cayley in 1808-1809.

Uses of dihedral angle and dihedral effect

Advertisements

Aircraft stability analysis

In analysis of aircraft stability, dihedral effect is also a stability derivative called Clβ (pronounced "see-ell-beta") meaning the change in rolling moment coefficient (the "Cl")[note 1] per degree (or radian) of change in sideslip angle (the "β").

Provision of stability

The purpose of dihedral effect is to contribute to stability in the roll axis. It is an important factor in the stability of the spiral mode which is sometimes called "roll stability"[note 2]. It is important to note that dihedral effect does not contribute directly to the restoring of "wings level", but that its action is indirect. It indirectly helps restore "wings level" through its effect on the spiral mode (as described below).

Wing clearance

Aircraft designers may increase dihedral angle or create polyhedral to provide increased clearance between wing tips and the runway. The increased dihedral effect caused by this may need to be compensated for by one or more other means, such as decreasing the dihedral angle on the horizontal tail.

Using dihedral angle to adjust dihedral effect

During the design of a fixed-wing aircraft (or any aircraft with horizontal surfaces), changing dihedral angle is usually a relatively simple way to adjust the overall dihedral effect. This is to compensate for other design elements' influence on the dihedral effect. These other elements (such as wing sweep, vertical mount point of the wing, etc.) may be more difficult to change than the dihedral angle. As a result, differing amounts of dihedral angle can be found on different types of fixed-wing aircraft. For example, the dihedral angle is usually greater on low-wing aircraft than on otherwise-similar high-wing aircraft. This is because "highness" of a wing (or "lowness" of vertical center of gravity compared to the wing) naturally creates more dihedral effect itself. This makes it so less dihedral angle is needed to get the amount of dihedral effect needed.

Common Confusions

Dihedral effect is defined simply to be the rolling moment caused by sideslip and nothing else. Rolling moments caused by other things that may be related to sideslip have different names.

Dihedral effect is not caused by yaw rate nor by the rate of sideslip change (\beta\cdot). Since dihedral effect is noticed by pilots when "rudder is applied", many pilots and other near-experts explain that the rolling moment is caused by one wing moving more quickly through the air and one wing less quickly. Indeed, this is an actual effect, but it is not the dihedral effect, which is caused by being at a sideslip angle, not by getting to one. These other effects are called "rolling moment due to yaw rate" and "rolling moment due to sideslip rate" respectively.

Dihedral effect is not roll stability in and of itself. Roll stability is less-ambiguously termed "spiral mode stability" and dihedral effect is a contributing factor to it, but dihedral effect is not any kind of stability by itself.

How dihedral angle creates dihedral effect and stabilizes the spiral mode

The following discusses how dihedral angle creates dihedral effect and how dihedral effect contributes to stability of the spiral mode. A stable spiral mode will cause the aircraft to eventually return to a nominally "wings level" bank angle when the angle of the wings is disturbed to become off-level[note 3].

Fig. 1: Uncompensated lift component produces a side force Fy, which causes the aircraft to sideslip.
Fig. 2: Non-zero sideslip sets the lower, upwind wing to a higher angle of attack, resulting in stabilising roll moment P.
The aircraft is shown flying towards the viewer.

If a disturbance causes an aircraft to roll away from its normal wings-level position as in figure 1., the aircraft will begin to move somewhat sideways toward the lower wing.[2] In Figure 2, the airplane's flight path has started to move toward its left while the nose of the airplane is still pointing in the original direction. This means that the oncoming air is arriving somewhat from the left of the nose. Because of this, the airplane now has sideslip angle in addition to the bank angle. Figure 2 shows the airplane as it presents itself to the oncoming air.

How dihedral angle creates rolling moment from sideslip (dihedral effect)

In Figure 2., the sideslip conditions (not the roll angle which is also shown) make the dihedral angle geometrically produce greater angle of attack on the forward-yawed wing and less angle of attack on the rearward-yawed wing. This alteration of angle of attack by sideslip is visible to the eye in Figure 2. Since greater angle of attack makes greater lift, the forward wing will have more lift and the rearward wing will have less lift. This difference in lift between the wings is a rolling moment, and since it is caused by sideslip, it is dihedral effect (or more correctly, it is a contribution to the total dihedral effect of the aircraft).

How dihedral effect stabilizes the spiral mode

The rolling moment created by the sideslip (labeled as "P") tends to roll the aircraft back to wings level. So, more dihedral effect more strongly rolls the wings back, less Dihedral effect, less so. So dihedral effect helps stabilize the spiral mode. It's not the whole picture however. At the same time that Angle of sideslip is building up, the vertical fin is trying to turn the nose back into the wind, much like a weathervane, minimizing the amount of sideslip that can be present. If there is no sideslip, there is no restoring rolling moment. If there is less sideslip, there is less restoring rolling moment. So, yaw stability created by the vertical fin fights the tendency for dihedral effect to roll the wings back level by not letting as much sideslip build up.

The spiral mode is the tendency to slowly diverge from, or the tendency to slowly return to wings level. If the spiral mode is stable, the aircraft will slowly return to wings-level, if it is unstable, the aircraft will slowly diverge from wings-level. dihedral effect and Yaw stability are the two primary factors that affect the stability of the spiral mode, although there are other factors that affect it less strongly.

Other factors contributing to dihedral effect

The CG of a paraglider is very low, making a strong contribution to dihedral effect.

Factors of design other than dihedral angle also contribute to dihedral effect.. Each increases or decreases total aircraft dihedral effect to a greater or lesser degree.

Sweepback

Wing sweepback also increases dihedral effect. This is one reason for anhedral configuration on military aircraft with high sweep angle, as well as on some airliners, even on low-wing aircraft such as Tu-134 and Tu-154.

Vertical position of the center of mass

The center of mass, usually called the center of gravity or "CG", is the balance point of an aircraft. If suspended at this point and allowed to rotate, a body (aircraft) will be balanced. The front-to-back location of the CG is of primary importance for the general stability of the aircraft, but the vertical location has important effects as well.

The vertical location of the CG changes the amount of dihedral effect. As the "vertical CG" moves lower, dihedral effect increases. This is caused by the center of lift and drag being further above the CG and having a longer moment arm. So, the same forces (lift and drag) that change as sideslip changes produce a larger moment about the CG of the aircraft. This is sometimes called the pendulum effect[note 4].

An extreme example of the effect of vertical CG on dihedral effect is a paraglider. The dihedral effect created by the very low vertical CG more than compensates for the negative dihedral effect created by the strong anhedral[note 5] of the necessarily strongly downward curving wing.

Effects of too much dihedral effect

A side effect of too much dihedral effect can be yaw-roll coupling, a tendency for an aircraft to dutch roll. This can be unpleasant to experience, or in extreme conditions can lead to loss of control or can overstress an aircraft.

Other Dihedral-related terminology

Anhedral on the wings and tailplane of an RAF Harrier GR7A

Anhedral

Military fighter aircraft often have near zero or even negative dihedral angle. This reduces dihedral effect, reducing the stability of the spiral mode. A too-stable spiral mode decreases maneuverability and is undesirable for fighter-type aircraft.

Anhedral angles are also seen on aircraft with a high mounted wing, such as the BAe 146 and Lockheed Galaxy. In such designs, the high mounted wing is above the center of gravity which confers extra dihedral effect due to the pendulum effect also called the Keel effect[note 4], so additional dihedral angle is often not required. In fact, such designs can have excessive dihedral effect and so be excessively stable in the spiral mode, so the anhedral angle is added to cancel out some of the dihedral effect to ensure that the aircraft can be easily maneuvered.

Polyhedral

McDonnell Douglas F-4 Phantom II showing polyhedral wing

Most aircraft have been designed with planar wings with simple dihedral (or anhedral). Some pre-World War II aircraft had gull wings bent near the root. Modern polyhedral wing designs generally cant upwards near the wingtips, increasing dihedral effect without increasing the angle the wings meet at the root, which maybe difficult to alter for some other reason.

Polyhedral is seen on gliders and some other aircraft. The McDonnell Douglas F-4 Phantom II is one such example, unique among jet fighters for having dihedral wingtips. This was added after prototype flight testing (the original prototype of the F-4 had a flat wing) showed the need to correct some unanticipated spiral mode instability - angling the wingtips, which were already designed to fold up for carrier operations, was a far more practical solution than re-engineering the entire wing.[3]

References

Notes

  1. ^ Roskam, Jan (1979). "4.1.7". Airplane Flight Dynamics and Automatic Flight Controls. 1. Ottawa, Kansas: Roskam Aviation and Engineering Corporation. pp. 139.   Library of Congress Catalog Card Number: 78-31382
  2. ^ Etkin, Bernard; Dynamics of Flight;Section 3.10; 1982; ISBN 0-471-08936-2
  3. ^ F-4_Phantom_II#XF4H-1_prototype

Footnotes

  1. ^ A rolling moment coefficient is a "normalization" of the rolling moment. Rolling moment has units of force times length. The rolling moment coefficient is normalized so it has no units. This is done by dividing the moment by wing area and by wing span and by dynamic pressure.
  2. ^ "Roll Stability" is a ambiguous term requiring context to discern the intended meaning of the user. It usually means "Spiral Mode Stability", but it is also often misused to mean dihedral effect or dihedral angle, both of which are not "stability" in any way by themselves, merely contributors to spiral mode stability.
  3. ^ In the spiral mode, if it is unstable, the aircraft will slowly, then more rapidly, diverge from "nominal wings-level" when the pilot makes no control inputs. If the spiral mode is stable and the pilot makes no inputs, when the aircraft starts from a banked attitude, it will return close to wings-level by itself.
  4. ^ a b The "pendulum effect" is also less commonly called the "keel effect".
  5. ^ The downward curve of a paraglider wing could be termed "continuous polyanhedral".

External links


Advertisements






Got something to say? Make a comment.
Your name
Your email address
Message