Aniline: Wikis

  

Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.

Encyclopedia

From Wikipedia, the free encyclopedia

Aniline
Aniline
Aniline
IUPAC name
Other names Phenylamine
Aminobenzene
Benzenamine
Identifiers
CAS number 62-53-3 Yes check.svgY
SMILES
Properties
Molecular formula C6H7N
Molar mass 93.13 g mol−1
Appearance colourless liquid
Density 1.0217 g/ml, liquid
Melting point

-6.3 °C, 267 K, 21 °F

Boiling point

184.13 °C, 457 K, 363 °F

Solubility in water 3.6 g/100 mL at 20°C
Solubility in methanol methanol 10.97 M [1]
Basicity (pKb) pKBH+ 4.87
Viscosity 3.71 cP (3.71 mPa·s at 25 °C
Thermochemistry
Std enthalpy of
combustion
ΔcHo298
-3394 kJ/mol
Hazards
MSDS External MSDS
EU classification Toxic (T)
Carc. Cat. 3
Muta. Cat. 3
Dangerous for
the environment (N)
R-phrases R23/24/25 R40 R41 R43 R48/23/24/25 R68 R50
S-phrases (S1/2) S26 S27 S36/37/39 S45 S46 S61 S63
NFPA 704
NFPA 704.svg
2
3
0
 
Related compounds
Related aromatic amines 1-Naphthylamine
2-Naphthylamine
Related compounds Phenylhydrazine
Nitrosobenzene
Nitrobenzene
Supplementary data page
Structure and
properties
n, εr, etc.
Thermodynamic
data
Phase behaviour
Solid, liquid, gas
Spectral data UV, IR, NMR, MS
 Yes check.svgY (what is this?)  (verify)
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa)
Infobox references

Aniline, phenylamine or aminobenzene is an organic compound with the formula C6H7N. It is the simplest and one of the most important aromatic amines, being used as a precursor to more complex chemicals. Its main application is in the manufacture of polyurethane. Like most volatile amines, it possesses the somewhat unpleasant odour of rotten fish and also has a burning aromatic taste; it is a highly-acrid poison. It ignites readily, burning with a smoky flame.

Contents

Structure and synthesis

Consisting of a phenyl group attached to an amino group, aniline is usually produced in industry in two steps from benzene:

Aniline production.svg

First, benzene is nitrated using a concentrated mixture of nitric acid and sulfuric acid at 50 to 60 °C, which gives nitrobenzene. In the second step, the nitrobenzene is hydrogenated, typically at 600 °C in presence of a nickel catalyst to give aniline. As an alternative, aniline is also prepared from phenol and ammonia, the phenol being derived from the cumene process. [2]

Derivatives

Many derivatives of aniline can be prepared in similar fashion. In commerce, three brands of aniline are distinguished--aniline oil for blue, which is pure aniline; aniline oil for red, a mixture of equimolecular quantities of aniline and ortho- and para-toluidines; and aniline oil for safranine, which contains aniline and ortho-toluidine, and is obtained from the distillate (échappés) of the fuchsine fusion.

Properties

Oxidation

Aniline is colorless, it slowly oxidizes and resinifies in air, giving a red-brown tint to aged samples. The oxidation of aniline has been carefully investigated. In alkaline solution, azobenzene results, whereas arsenic acid produces the violet-coloring matter violaniline. Chromic acid converts it into quinone, whereas chlorates, in the presence of certain metallic salts (especially of vanadium), give aniline black. Hydrochloric acid and potassium chlorate give chloranil. Potassium permanganate in neutral solution oxidizes it to nitrobenzene, in alkaline solution to azobenzene, ammonia and oxalic acid, in acid solution to aniline black. Hypochlorous acid gives 4-aminophenol and para-amino diphenylamine.

Basicity

Aniline is a weak base. Aromatic amines such as aniline are, in general, much weaker bases than aliphatic amines. Aniline reacts with strong acids to form anilinium (or phenylammonium) ion (C6H5-NH3+). The sulfate forms beautiful white plates. Although aniline is weakly basic, it precipitates zinc, aluminium, and ferric salts, and, on warming, expels ammonia from its salts. The weak basicity is due to a negative inductive effect as the lone pair on the nitrogen is partially delocalised into the pi system of the benzene ring.

Acylation

Aniline reacts with carboxylic acids[3] or more readily with acyl chlorides such as acetyl chloride to give amides. The amides formed from aniline are sometimes called anilides, for example CH3-CO-NH-C6H5 is acetanilide. Antifebrin (acetanilide), an anti-pyretic and analgesic, is obtained by the reaction of acetic acid and aniline.

N-Alkyl derivatives

Aniline combines directly with alkyl iodides to form secondary and tertiary amines. Methyl and dimethyl aniline are colourless liquids prepared by heating aniline, aniline hydro-chloride and methanol in an autoclave at 220 °C. They are of great importance in the colour industry. Methyl aniline boils at 193-195 °C, dimethyl aniline at 192 °C.

Sulfur derivatives

Boiled with carbon disulfide, it gives sulfocarbanilide (diphenyl thiourea), CS(NHC6H5)2, which may be decomposed into phenyl isothiocyanate, C6H5CNS, and triphenyl guanidine, C6H5N=C(NHC6H5)2.

Like phenols, aniline derivatives are highly susceptible to electrophilic substitution reactions. For example, reaction of aniline with sulfuric acid at 180 °C produces sulfanilic acid, NH2C6H4SO3H, which can be converted to sulfanilamide. Sulfanilamide is one of the sulfa drugs that were widely used as antibacterials in the early 20th century.

Diazotization

Aniline and its ring-substituted derivatives react with nitrous acid to form diazonium salts. Through these, the -NH2 group of aniline can be conveniently converted to -OH, -CN, or a halide via Sandmeyer reactions.

Other reactions

It reacts with nitrobenzene to produce phenazine in the Wohl-Aue reaction.

Its acetate is used in the Aniline acetate test for carbohydrates, identifying pentoses by conversion to furfural.

Uses

The great commercial value of aniline was due to the readiness with which it yields, directly or indirectly, dyestuffs. The discovery of mauve in 1856 by William Henry Perkin was the first of a series of an enormous range of dyestuffs, such as fuchsine, safranine and induline. In addition to its use as a precursor to dyestuffs, it is a starting-product for the manufacture of many drugs, such as paracetamol (acetaminophen, Tylenol).

It is used to stain neural RNA blue in the Nissl stain.

At the present time, the largest market for aniline is preparation of methylene diphenyl diisocyanate (MDI), some 85% of aniline serving this market. Other uses include rubber processing chemicals (9%), herbicides (2%), and dyes and pigments (2%).[4]

When polymerised, aniline can be used as a type of nanowire for use as a semiconducting electrode bridge, most recently used for nano-scale devices such as biosensors. These polyaniline nanowires can be doped with a dopant accordingly in order to achieve certain semiconducting properties.

History

Aniline was first isolated from the destructive distillation of indigo in 1826 by Otto Unverdorben[5] , who named it crystalline. In 1834, Friedrich Runge (Pogg. Ann., 1834, 31, p. 65; 32, p. 331) isolated from coal tar a substance that produced a beautiful blue colour on treatment with chloride of lime, which he named kyanol or cyanol. In 1841, C. J. Fritzsche showed that, by treating indigo with caustic potash, it yielded an oil, which he named aniline, from the specific name of one of the indigo-yielding plants, Indigofera anil, anil being derived from the Sanskrit nīla, dark-blue, and nīlā, the indigo plant. About the same time N. N. Zinin found that, on reducing nitrobenzene, a base was formed, which he named benzidam. August Wilhelm von Hofmann investigated these variously-prepared substances, and proved them to be identical (1855), and thenceforth they took their place as one body, under the name aniline or phenylamine.

Its first industrial-scale use was in the manufacture of mauveine, a purple dye discovered in 1856 by Hofmann's student William Henry Perkin. At the time of mauveine's discovery, aniline was an expensive laboratory compound, but it was soon prepared "by the ton" using a process previously discovered by Antoine Béchamp.[6] The synthetic dye industry grew rapidly as new aniline-based dyes were discovered in the late 1850s and 1860s.

p-Toluidine, an aniline derivative, can be used in qualitative analysis to prepare carboxylic acid derivatives.

Toxicology

Aniline is toxic by inhalation of the vapour, absorption through the skin or swallowing. It causes headache, drowsiness, cyanosis, and mental confusion, and, in severe cases, can cause convulsions. Prolonged exposure to the vapour or slight skin exposure over a period of time affects the nervous system and the blood, causing tiredness, loss of appetite, headache, and dizziness.[7]

Oil mixtures containing rapeseed oil denatured with aniline have been clearly linked by epidemiological and analytic chemical studies to the toxic oil syndrome that hit Spain in the spring and summer of 1981, in which 20,000 became acutely ill, 12,000 were hospitalized, and more than 350 died in the first year of the epidemic. The precise etiology though remains unknown.

Some authorities class aniline as a carcinogen, although the IARC lists it in Group 3 (not classifiable as to its carcinogenicity to humans) due to the limited and contradictory data available. Aniline dyes are a known risk factor for bladder cancer. Bladder cancer should always be in the differential diagnosis of a patient with hematuria and history of aniline exposure.

References

  1. ^ Solubility of aniline in methanol
  2. ^ Thomas Kahl, Kai-Wilfrid Schröder, "Aniline" in Ullmann's Encyclopedia of Industrial Chemistry 2007; John Wiley & Sons: New York.
  3. ^ Carl N. Webb (1941), "Benzanilide", Org. Synth., http://www.orgsyn.org/orgsyn/orgsyn/prepContent.asp?prep=cv1p0082  ; Coll. Vol. 1: 82  
  4. ^ "Aniline". The Chemical Market Reporter. http://www.the-innovation-group.com/ChemProfiles/Aniline.htm. Retrieved 2007-12-21.  
  5. ^ Otto Unverdorben (1826). "Ueber das Verhalten der organischen Körper in höheren Temperaturen". Annalen der Physik 84 (11): 397–410. doi:10.1002/andp.18260841109.  
  6. ^ Perkin, William Henry. 1861-06-08. "Proceedings of Checmical Societies: Chemical Society, Thursday, May 16, 1861." The Chemical News and Journal of Industrial Science. Retrieved on 2007-09-24.
  7. ^ Muir, GD (ed.) 1971, Hazards in the Chemical Laboratory, The Royal Institute of Chemistry, London.

External links

This article incorporates text from the Encyclopædia Britannica, Eleventh Edition, a publication now in the public domain.


1911 encyclopedia

Up to date as of January 14, 2010

From LoveToKnow 1911

ANILINE, PHENYLAMINE, Or Aminobenzene, (C 6 H 5 Nh 2), an organic base first obtained from the destructive distillation of indigo in 1826 by O. Unverdorben (Pogg. Ann., 1826, 8, p. 397), who named it crystalline. In 1834, F. Runge (Pogg. Ann., 1834, 3 1, p. 6 5; 3 2, p. 33 1) isolated from coal-tar a substance which produced a beautiful blue colour on treatment with chloride of lime; this he named kyanol or cyanol. In 1841, C. J. Fritzsche showed that by treating indigo with caustic potash it yielded an oil, which he named aniline, from the specific name of one of the indigo-yielding plants, Indigofera anil, anil being derived from the Sanskrit nila, dark-blue, and nila, the indigo plant. About the same time N. N. Zinin found that on reducing nitrobenzene, a base was formed which he named benzidam. A. W. von Hofmann investigated these variously prepared substances, and proved them to be identical, and thenceforth they took their place as one body, under the name aniline or phenylamine. Pure aniline is a basic substance of an oily consistence, colourless, melting at - 8° and boiling at 184° C. On exposure to air it absorbs oxygen and resinifies, becoming deep brown in colour; it ignites readily, burning with a large smoky flame. It possesses a somewhat pleasant vinous odour and a burning aromatic taste; it is a highly acrid poison.

Aniline is a weak base and forms salts with the mineral acids. Aniline hydrochloride forms large colourless tables, which become greenish on exposure; it is the "aniline salt" of commerce. The sulphate forms beautiful white plates. Although aniline is but feebly basic, it precipitates zinc, aluminium and ferric salts, and on warming expels ammonia from its salts. Aniline combines directly with alkyl iodides to form secondary and tertiary amines; boiled with carbon disulphide it gives sulphocarbanilide (diphenyl thio-urea), CS(NHC 6 H 5) 2, which may be decomposed into phenyl mustard-oil, C 6 H 5 CNS, and triphenyl guanidine, C 6 H 5 N: C(NHC6H5)2. Sulphuric acid at 180 gives sulphanilic acid, NH 2 C 6 H 4 SO 3 H. Anilides, compounds in which the amino group is substituted by an acid radical, are prepared by heating aniline with certain acids; antifebrin or acetanilide is thus obtained from acetic acid and aniline. The oxidation of aniline has been carefully investigated. In alkaline solution azobenzene results, while arsenic acid produces the violet-colouring matter violaniline. Chromic acid converts it into quinone, while chlorates, in the presence of certain metallic salts (especially of vanadium), give aniline black. Hydrochloric acid and potassium chlorate give chloranil. Potassium permanganate in neutral solution oxidizes it to nitrobenzene, in alkaline solution to azobenzene, ammonia and oxalic acid, in acid solution to aniline black. Hypochlorous acid gives para-amino phenol and para-amino diphenylamine (E. Barnberger, Ber., 1898, 31, p. 1522).

The great commercial value of aniline is due to the readiness with which it yields, directly or indirectly, valuable dyestuffs. The discovery of mauve in 1858 by Sir W. H. Perkin was the first of a series of dyestuffs which are now to be numbered by hundreds. Reference should be made to the articles Dyeing, Fuchsine, Safranine, Indulines, for more details On this subject. In addition to dyestuffs, it is a starting-product for the manufacture of many drugs, such as antipyrine, antifebrin, &c. Aniline is manufactured by reducing nitrobenzene with iron and hydrochloric acid and steam-distilling the product. The purity of the product depends upon the quality of the benzene from which the nitrobenzene was prepared. In commerce three brands of aniline are distinguished - aniline oil for blue, which is pure aniline; aniline oil for red, a mixture of equimolecular quantities of aniline and orthoand para-toluidines; and aniline oil for safranine, which contains aniline and ortho-toluidine, and is obtained from the distillate (echappes) of the fuchsine fusion. Monomethyl and dimethyl aniline are colourless liquids prepared by heating aniline, aniline hydrochloride and methyl alcohol in an autoclave at 220°. They are of great importance in the colour industry. Monomethyl aniline boils at 193-195'; dimethyl aniline at 192°.


<< Luigi Anichini

Animal >>








Got something to say? Make a comment.
Your name
Your email address
Message