An atomic orbital is a mathematical function that describes the wavelike behavior of either one electron or a pair of electrons in an atom.^{[1]} This function can be used to calculate the probability of finding any electron of an atom in any specific region around the atom's nucleus. These functions may serve as threedimensional graph of an electron’s likely location. The term may thus refer directly to the physical region defined by the function where the electron is likely to be.^{[2]} Specifically, atomic orbitals are the possible quantum states of an individual electron in the collection of electrons around a single atom, as described by the orbital function.
Despite the obvious analogy to planets revolving around the Sun, electrons cannot be described as solid particles and so atomic orbitals rarely, if ever, resemble a planet's elliptical path. A more accurate analogy might be that of a large and often oddlyshaped atmosphere (the electron), distributed around a relatively tiny planet (the atomic nucleus). Atomic orbitals exactly describe the shape of this atmosphere only when a single electron is present in an atom. When more electrons are added to a single atom, the additional electrons tend to more evenly fill in a volume of space around the nucleus so that the resulting collection (sometimes termed the atom’s “electron cloud” ^{[3]}) tends toward a generally spherical zone of probability describing where the atom’s electrons will be found.
The idea that electrons might revolve around a compact nucleus with definite angular momentum was convincingly argued in 1913 by Niels Bohr,^{[4]} and the Japanese physicist Hantaro Nagaoka published an orbitbased hypothesis for electronic behavior as early as 1904.^{[5]} However, it was not until 1926 that the solution of the Schrödinger equation for electronwaves in atoms provided the functions for the modern orbitals.^{[6]}
Because of the difference from classical mechanical orbits, the term "orbit" for electrons in atoms, has been replaced with the term orbital—a term first coined by chemist Robert Mulliken in 1932.^{[7]} Atomic orbitals are typically described as “hydrogenlike” (meaning oneelectron) wave functions over space, categorized by n, l, and m quantum numbers, which correspond with the pair of electrons' energy, angular momentum, and an angular momentum direction, respectively. Each orbital (defined by a different set of quantum numbers), and which contains a maximum of two electrons, is also known by the classical names used in the electron configurations shown on the right. These classical orbital names (s, p, d, f) are derived from the characteristics of their spectroscopic lines: sharp, principal, diffuse, and fundamental, the rest being named in alphabetical order. ^{[8]}^{[9]}
From about 1920, even before the advent of modern quantum mechanics, the aufbau principle (construction principle) that atoms were built up of pairs of electrons, arranged in simple repeating patterns of increasing odd numbers (1,3,5,7..), had been used by Niels Bohr and others to infer the presence of something like atomic orbitals within the total electron configuration of complex atoms. In the mathematics of atomic physics, it is also often convenient to reduce the electron functions of complex systems into combinations of the simpler atomic orbitals. Although each electron in a multielectron atom is not confined to one of the “oneortwoelectron atomic orbitals” in the idealized picture above, still the electron wavefunction may be broken down into combinations which still bear the imprint of atomic orbitals; as though, in some sense, the electron cloud of a manyelectron atom is still partly “composed” of atomic orbitals, each containing only one or two electrons. The physicality of this view is best illustrated in the repetitive nature of the chemical and physical behavior of elements which results in the natural ordering known from the 19th century as the periodic table of the elements. In this ordering, the repeating periodicity of 2, 6, 10, and 14 elements in the periodic table corresponds with the total number of electrons which occupy a complete set of s, p, d and f atomic orbitals, respectively.
Contents 
Orbitals are given names in the form:
where X is the energy level corresponding to the principal quantum number n, type is a lowercase letter denoting the shape or subshell of the orbital and it corresponds to the angular quantum number l, and y is the number of electrons in that orbital.
For example, the orbital 1s^{2} (pronounced "one ess two") has two electrons and is the lowest energy level (n = 1) and has an angular quantum number of l = 0. In Xray notation, the principal quantum number is given a letter associated with it. For n = 1, 2, 3, 4, 5, ..., the letters associated with those numbers are K, L, M, N, O, ... respectively.
In quantum mechanics, the state of an atom, i.e. the eigenstates of the atomic Hamiltonian, is expanded (see configuration interaction expansion and basis (linear algebra)) into linear combinations of antisymmetrized products (Slater determinants) of oneelectron functions. The spatial components of these oneelectron functions are called atomic orbitals. (When one considers also their spin component, one speaks of atomic spin orbitals.)
In atomic physics, the atomic spectral lines correspond to transitions (quantum leaps) between quantum states of an atom. These states are labelled by a set of quantum numbers summarized in the term symbol and usually associated to particular electron configurations, i.e. by occupations schemes of atomic orbitals (e.g. 1s^{2} 2s^{2} 2p^{6} for the ground state of neon  term symbol: ^{1}S_{0}).
This notation means that the corresponding Slater determinants have a clear higher weight in the configuration interaction expansion. The atomic orbital concept is therefore a key concept for visualizing the excitation process associated to a given transition. For example, one can say for a given transition that it corresponds to the excitation of an electron from an occupied orbital to a given unoccupied orbital. Nevertheless one has to keep in mind that electrons are fermions ruled by Pauli exclusion principle and cannot be distinguished from the other electrons in the atom. Moreover, it sometimes happens that the configuration interaction expansion converges very slowly and that one cannot speak about simple onedeterminantal wave function at all. This is the case when electron correlation is large.
Fundamentally, an atomic orbital is a oneelectron wavefunction, even though most electrons do not exist in oneelectron atoms, and so the oneelectron view is an approximation. When thinking about orbitals, we are often given an orbital vision which (even if it is not spelled out) is heavily influenced by this Hartree–Fock approximation, which is one way to reduce the complexities of molecular orbital theory.
Immediately after Heisenberg formulated his uncertainty relation, it was noted by Bohr that the existence of any sort of wave packet implies uncertainty in the wave frequency and wavelength, since a spread of frequencies is needed to create the packet itself. In quantum mechanics, where all particle momenta are associated with waves, it is the formation of such a wave packet which localizes the wave, and thus the particle, in space. In states where a quantum mechanical particle is bound, it must be localized as a wave packet, and the existence of the packet and its minimum size implies a spread and minimal value in particle wavelength, and thus also momentum and energy. In quantum mechanics, as a particle is localized to a smaller region in space, the associated compressed wave packet requires a larger and larger range of momenta, and thus larger kinetic energy. Thus, the binding energy to contain or trap a particle in a smaller region of space, increases without bound, as the region of space grows smaller. Particles cannot be restricted to a geometric point in space, since this would require an infinite particle momentum.
In chemistry, Schrödinger, Pauling, Mulliken and others noted that the consequence of Heisenberg's relation was that the electron, as a wave packet, could not be considered to have an exact location in its orbital. Max Born suggested that the electron's position needed to be described by a probability distribution which was connected with finding the electron at some point in the wavefunction which described its associated wave packet. The new quantum mechanics did not give exact results, but only the probabilities for the occurrence of a variety of possible such results. Heisenberg held that the path of a moving particle has no meaning if we cannot observe it, as we cannot with electrons in an atom.
In the quantum picture of Heisenberg, Schrödinger and others, the Bohr atom number n for each orbital became known as an nsphere in a three dimensional atom and was pictured as the mean energy of the probability cloud of the electron's wave packet which surrounded the atom.
Although Heisenberg used infinite sets of positions for the electron in his matrices, this does not mean that the electron could be anywhere in the universe.^{[citation needed]} Rather there are several laws that show the electron must be in one localized probability distribution. An electron is described by its energy in Bohr's atom which was carried over to matrix mechanics. Therefore, an electron in a certain nsphere had to be within a certain range from the nucleus depending upon its energy.^{[citation needed]} This restricts its location.
The simplest atomic orbitals are those that occur in an atom with a single electron, such as the hydrogen atom. In this case the atomic orbitals are the eigenstates of the hydrogen Hamiltonian. They can be obtained analytically (see hydrogen atom). An atom of any other element ionized down to a single electron is very similar to hydrogen, and the orbitals take the same form.
For atoms with two or more electrons, the governing equations can only be solved with the use of methods of iterative approximation. Orbitals of multielectron atoms are qualitatively similar to those of hydrogen, and in the simplest models, they are taken to have the same form. For more rigorous and precise analysis, the numerical approximations must be used.
A given (hydrogenlike) atomic orbital is identified by unique values of three quantum numbers: n, l, and m_{l}. The rules restricting the values of the quantum numbers, and their energies (see below), explain the electron configuration of the atoms and the periodic table.
The stationary states (quantum states) of the hydrogenlike atoms are its atomic orbital. However, in general, an electron's behavior is not fully described by a single orbital. Electron states are best represented by timedepending "mixtures" (linear combinations) of multiple orbitals. See Linear combination of atomic orbitals molecular orbital method.
The quantum number n first appeared in the Bohr model. It determines, among other things, the distance of the electron from the nucleus; all electrons with the same value of n lie at the same distance. Modern quantum mechanics confirms that these orbitals are closely related. For this reason, orbitals with the same value of n are said to comprise a "shell". Orbitals with the same value of n and also the same value of l are even more closely related, and are said to comprise a "subshell".
An atomic orbital is uniquely identified by the values of the three quantum numbers, and each set of the three quantum numbers corresponds to exactly one orbital, but the quantum numbers only occur in certain combinations of values. The rules governing the possible values of the quantum numbers are as follows:
The principal quantum number n is always a positive integer. In fact, it can be any positive integer, but for reasons discussed below, large numbers are seldom encountered. Each atom has, in general, many orbitals associated with each value of n; these orbitals together are sometimes called electron shells.
The azimuthal quantum number is a nonnegative integer. Within a shell where n is some integer n_{0}, ranges across all (integer) values satisfying the relation . For instance, the n = 1 shell has only orbitals with , and the n = 2 shell has only orbitals with , and . The set of orbitals associated with a particular value of are sometimes collectively called a subshell.
The magnetic quantum number is also always an integer. Within a subshell where is some integer , ranges thus: .
The above results may be summarized in the following table. Each cell represents a subshell, and lists the values of available in that subshell. Empty cells represent subshells that do not exist.
l = 0  1  2  3  4  ...  

n = 1  m_{l} = 0  
2  0  1, 0, 1  
3  0  1, 0, 1  2, 1, 0, 1, 2  
4  0  1, 0, 1  2, 1, 0, 1, 2  3, 2, 1, 0, 1, 2, 3  
5  0  1, 0, 1  2, 1, 0, 1, 2  3, 2, 1, 0, 1, 2, 3  4, 3, 2 1, 0, 1, 2, 3, 4  
...  ...  ...  ...  ...  ...  ... 
Subshells are usually identified by their n and values. n is represented by its numerical value, but is represented by a letter as follows: 0 is represented by 's', 1 by 'p', 2 by 'd', 3 by 'f', and 4 by 'g'. For instance, one may speak of the subshell with n = 2 and as a '2s subshell'.
Any discussion of the shapes of electron orbitals is necessarily imprecise, because a given electron, regardless of which orbital it occupies, can at any moment be found at any distance from the nucleus and in any direction due to the uncertainty principle.
However, the electron is much more likely to be found in certain regions of the atom than in others. Given this, a boundary surface can be drawn so that the electron has a high probability to be found anywhere within the surface, and all regions outside the surface have low values. The precise placement of the surface is arbitrary, but any reasonably compact determination must follow a pattern specified by the behavior of ψ^{2}, the square of the wavefunction. This boundary surface is what is meant when the "shape" of an orbital is referred to.
Generally speaking, the number n determines the size and energy of the orbital for a given nucleus: as n increases, the size of the orbital increases. However, in comparing different elements, the higher nuclear charge Z of heavier elements causes their orbitals to contract by comparison to lighter ones, so that the overall size of the whole atom remains very roughly constant, even as the number of electrons in heavier elements (higher Z) increases.
Also in general terms, determines an orbital's shape, and its orientation. However, since some orbitals are described by equations in complex numbers, the shape sometimes depends on also.
The single sorbitals () are shaped like spheres. For n=1 the sphere is "solid" (it is most dense at the center and fades exponentially outwardly), but for n=2 or more, each single sorbital is composed of spherically symmetric surfaces which are nested shells (i.e., the "wavestructure" is radial, following a sinusoidal radial component as well). The sorbitals for all n numbers are the only orbitals with an antinode (a region of high wave function density) at the center of the nucleus. All other orbitals (p, d, f, etc.) have angular momentum, and thus avoid the nucleus (having a wave node at the nucleus).
The three porbitals for n=2 have the form of two ellipsoids with a point of tangency at the nucleus (sometimes referred to as a dumbbell). The three porbitals in each shell are oriented at right angles to each other, as determined by their respective values of .
Four of the five dorbitals for n=3 look similar, each with four pearshaped balls, each ball tangent to two others, and the centers of all four lying in one plane, between a pair of axes. Three of these planes are the xy, xz, and yzplanes, and the fourth has the centres on the x and y axes. The fifth and final dorbital consists of three regions of high probability density: a torus with two pearshaped regions placed symmetrically on its z axis.
There are seven forbitals, each with shapes more complex than those of the dorbitals.
For each s, p, d, f and g set of orbitals, the set of orbitals which composes it forms a spherically symmetrical set of shapes. For nons orbitals, which have lobes, the lobes point in directions so as to fill space as symmetrically as possible for number of lobes which exist for a set of orientations. For example, the three p orbitals have six lobes which are oriented to each of the six primary directions of 3D space; for the 5 d orbitals, there are a total of 18 lobes, in which again six point in primary directions, and the 12 additional lobes fill the 12 gaps which exist between each pairs of these 6 primary axes.
Additionally, as is the case with the s orbitals, individual p, d, f and g orbitals with n values higher than the lowest possible value, exhibit an additional radial node structure which is reminiscent of harmonic waves of the same type, as compared with the lowest (or fundamental) mode of the wave. As with s orbitals, this phenomenon provides p, d, f, and g orbitals at the next higher possible value of n (for example, 3p orbitals vs. the fundamental 2p), an additional node in each lobe. Still higher values of n further increase the number of radial nodes, for each type of orbital.
The shapes of atomic orbitals in oneelectron atom are related to 3dimensional spherical harmonics.
This table shows all orbital configurations for the real hydrogenlike wave functions up to 7s, and therefore covers the simple electronic configuration for all elements in the periodic table up to radium.
s (l=0)  p (l=1)  d (l=2)  f (l=3)  

m=0  m=0  m=±1  m=0  m=±1  m=±2  m=0  m=±1  m=±2  m=±3  
s  p_{z}  p_{x}  p_{y}  d_{z2}  d_{xz}  d_{yz}  d_{xy}  d_{x2y2}  f_{z3}  f_{xz2}  f_{yz2}  f_{xyz}  f_{z(x2y2)}  f_{x(x23y2)}  f_{y(3x2y2)}  
n=1  
n=2  
n=3  
n=4  
n=5  . . .  . . .  . . .  . . .  . . .  . . .  . . .  
n=6  . . .  . . .  . . .  . . .  . . .  . . .  . . .  . . .  . . .  . . .  . . .  . . .  
n=7  . . .  . . .  . . .  . . .  . . .  . . .  . . .  . . .  . . .  . . .  . . .  . . .  . . .  . . .  . . . 
In atoms with a single electron (hydrogenlike atoms), the energy of an orbital (and, consequently, of any electrons in the orbital) is determined exclusively by n. The n = 1 orbital has the lowest possible energy in the atom. Each successively higher value of n has a higher level of energy, but the difference decreases as n increases. For high n, the level of energy becomes so high that the electron can easily escape from the atom.
In atoms with multiple electrons, the energy of an electron depends not only on the intrinsic properties of its orbital, but also on its interactions with the other electrons. These interactions depend on the detail of its spatial probability distribution, and so the energy levels of orbitals depend not only on n but also on . Higher values of are associated with higher values of energy; for instance, the 2p state is higher than the 2s state. When = 2, the increase in energy of the orbital becomes so large as to push the energy of orbital above the energy of the sorbital in the next higher shell; when = 3 the energy is pushed into the shell two steps higher.
The energy sequence of the first 24 subshells is given in the following table. Each cell represents a subshell with n and given by its row and column indices, respectively. The number in the cell is the subshell's position in the sequence.
s  p  d  f  g  

1  1  
2  2  3  
3  4  5  7  
4  6  8  10  13  
5  9  11  14  17  21 
6  12  15  18  22  26 
7  16  19  23  27  31 
8  20  24  28  32  36 
Note: empty cells indicate nonexistent sublevels, while numbers in italics indicate sublevels that could exist, but which do not hold electrons in any element currently known.
Several rules govern the placement of electrons in orbitals (electron configuration). The first dictates that no two electrons in an atom may have the same set of values of quantum numbers (this is the Pauli exclusion principle). These quantum numbers include the three that define orbitals, as well as s, or spin quantum number. Thus, two electrons may occupy a single orbital, so long as they have different values of s. However, only two electrons, because of their spin, can be associated with each orbital.
Additionally, an electron always tends to fall to the lowest possible energy state. It is possible for it to occupy any orbital so long as it does not violate the Pauli exclusion principle, but if lowerenergy orbitals are available, this condition is unstable. The electron will eventually lose energy (by releasing a photon) and drop into the lower orbital. Thus, electrons fill orbitals in the order specified by the energy sequence given above.
This behavior is responsible for the structure of the periodic table. The table may be divided into several rows (called 'periods'), numbered starting with 1 at the top. The presently known elements occupy seven periods. If a certain period has number i, it consists of elements whose outermost electrons fall in the ith shell.
The periodic table may also be divided into several numbered rectangular 'blocks'. The elements belonging to a given block have this common feature: their highestenergy electrons all belong to the same state (but the n associated with that state depends upon the period). For instance, the leftmost two columns constitute the 'sblock'. The outermost electrons of Li and Be respectively belong to the 2s subshell, and those of Na and Mg to the 3s subshell.
The number of electrons in a neutral atom increases with the atomic number. The electrons in the outermost shell, or valence electrons, tend to be responsible for an element's chemical behavior. Elements that contain the same number of valence electrons can be grouped together and display similar chemical properties.
For elements with high atomic number Z, the effects of relativity become more pronounced, and especially so for s electrons, which move at relativistic velocities as they penetrate the screening electrons near the core of high Z atoms. This relativistic increase in momentum for high speed electrons causes a corresponding decrease in wavelength and contraction of 6s orbitals relative to 5d orbitals (by comparison to corresponding s and d electrons in lighter elements in the same column of the periodic table); this results in 6s valence electrons becoming lowered in energy.
Examples of significant physical outcomes of this effect include the lowered melting temperature of mercury (which results from 6s electrons not being available for metal bonding) and the golden color of gold and caesium (which results from narrowing of 6s to 5d transition energy to the point that visible light begins to be absorbed). See [1].
In the Bohr Model, an n = 1 electron has a velocity given by v = Zαc, where Z is the atomic number, α is the finestructure constant, and c is the speed of light. In nonrelativistic quantum mechanics, therefore, any atom with an atomic number greater than 137 would require its 1s electrons to be traveling faster than the speed of light. Even in the Dirac equation, which accounts for relativistic effects, the wavefunction of the electron for atoms with Z > 137 is oscillatory and unbound. The significance of element 137, also known as untriseptium, was first pointed out by the physicist Richard Feynman. Element 137 is sometimes informally called feynmanium (symbol Fy). However, Feynman's approximation fails to predict the exact critical value of Z due to the nonpointcharge nature of the nucleus and very small orbital radius of inner electrons, resulting in a potential seen by inner electrons which is effectively less than Z. The critical Z value which makes the atom unstable with regard to highfield breakdown of the vacuum and production of electronpositron pairs, does not occur until Z is about 173. These conditions are not seen except transiently in collisions of very heavy nuclei such as lead or uranium in accelerators, where such electronpositron production from these effects has been claimed to be observed. See Extension of the periodic table beyond the seventh period.

Atomic orbitals are the places surrounding the nucleus of an atom where the electrons are most likely to be at any given time. It used to be believed that electrons behaved similarly to the solar system, where the sun is the nucleus and the planets are like the electrons. However, electrons do not go in circles, they move erratically. The number of atomic orbitals in an element is defined by the period the element is in. Electrons move between orbitals depending on how fast they are moving and how many other electrons there are.
