| Barton Swing Aqueduct | |
|---|---|
 |
|
| The Barton Swing Aqueduct in the closed position | |
| Carries | Bridgewater Canal |
| Crosses | Manchester Ship Canal |
| Location | Barton upon Irwell |
| OS grid reference | |
| Designer | Sir Edward Leader Williams |
| Number of spans | Two (Central Pivot) |
| Total length | 330 feet (100 m) |
| Boats can pass? | Only Narrowboats |
| Towpath(s) | None |
| Completion date | 1893 |
| Opening date | 1894 |
| Heritage status | Grade II* |
| Coordinates | 53°28′29″N 2°21′08″W / 53.4748°N -2.3521°ECoordinates: 53°28′29″N 2°21′08″W / 53.4748°N -2.3521°E |
The Barton Swing Aqueduct is a moveable aqueduct in Barton upon Irwell in Greater Manchester, England. It carries the Bridgewater Canal across the Manchester Ship Canal, the swinging action allows large vessels using the Manchester Ship Canal to pass underneath and smaller narrowboats to cross over the top. The aqueduct is a Grade II* listed building[1] and is considered a major feat of Victorian civil engineering.[1][2] Designed by Sir Edward Leader Williams and built by Andrew Handyside of Derby, it opened in 1894 and remains in regular use.
Contents |
The Barton Swing Aqueduct was a direct replacement for the earlier Barton Aqueduct, a stone structure crossing the River Irwell. The original stone aqueduct was designed by James Brindley and dated from 1761; it was described as "one of the seven wonders of the canal age".[3]
The construction of the Manchester Ship Canal in the 1890s necessitated the replacement of this structure, as the height of ships using the new ship canal would make them too large to pass under the original aqueduct.[3] An alternative scheme involving the use of a double lock flight was not used, because of the need to conserve water in the Bridgewater canal above.[4]
The new aqueduct was designed by Sir Edward Leader Williams,[1] engineer to the Manchester Ship Canal Company, and built by Andrew Handyside of Derby. It became operational with the first barge crossing it on 21 August 1893. The aqueduct was commercially opened on 1 January 1894.[5] Williams was also involved with the Anderton Boat Lift, another moving canal structure in the region.
The aqueduct is a form of swing bridge. When closed, it allows canal traffic to pass along the Bridgewater Canal. When large vessels need to pass along the Ship Canal, the 1,450-tonne[2] and 330-foot (100 m) long iron trough[3] is rotated 90 degrees on a pivot mounted on a small, purpose-built island in the Ship Canal. A gate at each end of the trough retains around 800 tonnes of water; further gates on each bank retain water in their adjacent stretches of canal.[2] The aqueduct once had a suspended towpath along its length however this has been removed in recent years on grounds of safety.
The aqueduct and parallel swing road bridge are controlled from a brick control tower, on an island in the centre of the ship canal[4] The island supports the pivot point for the rotating structures; when in the open positions, the aqueduct and road bridge line up along the length of the island, allow ships to traverse along each side of the ship canal
  | Facts and Figures - :| Manchester Ship Canal |: |
| | Barton Swing Aqueduct - Pastscape - Detailed Result: BARTON SWING AQUEDUCT |
|
|
Wikis
Map
Search
