Brassicasterol: Wikis

  

Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.

Encyclopedia

From Wikipedia, the free encyclopedia

Brassicasterol
Brassicasterol
IUPAC name
Other names brassicasterol
(3β,22E)-ergosta-5,22-dien-3-ol
24β-methylcholesta-5,22-dien-3 beta-ol
ergosta-5,22-dien-3β-ol
Identifiers
CAS number 474-67-9 Yes check.svgY
SMILES
Properties
Molecular formula C28H46O
Molar mass 398.67 g/mol
Appearance white solid
Density  ? g/ml, solid at room temperature
Melting point

150-151°C

Solubility in water  ? mg/l
Hazards
Flash point non-flammable
Related compounds
Related Sterols cholesterol
β-sitosterol
campesterol
stigmasterol
 Yes check.svgY (what is this?)  (verify)
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa)
Infobox references

Brassicasterol (24-methyl cholest-5,22-dien-3β-ol) is a 28-carbon sterol synthesised by several unicellular algae (phytoplankton) and some terrestrial plants, e.g., oilseed rape. This compound has frequently been used as a biomarker for the presence of (marine) algal matter in the environment.

Contents

Chemical properties

Solubility

Brassicasterol has a low water solubility and, as a consequence, a high octanol – water partition coefficient (Kow = ??). This means that, in most environmental systems, brassicasterol will be associated with the solid phase.

Degradation

In anaerobic sediments and soils, brassicasterol is stable for many hundreds of years, enabling it to be used as an indicator of past algal production (see below).

Chemical analysis

Since the molecule has a hydroxyl (-OH) group, it is frequently bound to other lipids including glycerols; most analytical methods, therefore, utilise a strong alkali (KOH or NaOH) to saponify the ester linkages. Typical extraction solvents include 6% KOH in methanol. The free sterols are then separated from the polar lipids by partitioning into a less polar solvent (e.g, hexane). Prior to analysis, the hydroxyl group is frequently derivatised with BSTFA (bis-trimethyl silyl trifluoroacetamide) to replace the hydrogen with the less exchangeable trimethylsilyl (TMS) group. Instrumental analysis is frequently conducted on Gas Chromatograph (GC) with either a Flame Ionisation Detector (FID) or Mass Spectrometer (MS). The mass spectrum for the TMS ether of brassicasterol can be seen in the Figure.
Mass fragmentation pattern for brassicasterol at 70eV on a Fisons MD800 mass spectrometer

Formation and occurrence

Algal sources

Brassicasterol is formed in plants from the isoprenoid squalene through campesterol as an intermediate. A list of the algae in which brassicasterol has been identified is shown below together with approximate composition (Data from an excellent review by Volkman, 1986).

Sterol content of selected dinoflagellates (as percentage). Data from Volkman, 1986
Species A B C D E F G H others
Gonyaulax spp 100 0 0 0 0 0 0 0 0
Peridinium foliaceum 100 0 0 0 0 0 0 0 0
Peridinium foliaceum 80 20 0 0 0 0 0 0 0
Gonyaulax diegensis 39 0 0 0 0 0 0 29 32
Pyrocystis lunula 76 6 0 2 1 0 0 0 15
Gonyaulax polygramma 36 1 0 9 7 0 0 0 47
Gymnodinium wilczeki 26 39 0 35 1 0 0 0 0
Glenodinium hallii 8 50 0 0 0 42 0 0 0
Noctiluca milaris 0 1 1 5 73 0 6 0 14
Gymnodinium simplex 0 0 0 0 53 0 0 0 47
Prorocentrum cordatum 7 0 0 0 5 0 63 0 25
A = cholesterol
B = campesterol
C = sitosterol
D = 22-dehydrocholesterol ((22E)-cholesta-5,22-dien-3β-ol)
E = BRASSICASTEROL
F = stigmasterol
G = 24-methylene cholesterol
H = fucosterol

Other sources

?

Use as a tracer for marine algae

The principal source of brassicasterol in the environment is from marine algae. Its relatively high concentration and stability allows it to be used in the assessment of the origin of organic matter in samples, especially sediments.

Brassicasterol / cholesterol ratio

The concentration of brassicasterol down a sediment core from Loch Striven, Scotland together with it ratio to cholesterol

The concentration of brassicasterol in a core sample from Loch Striven, Scotland. Highest values may be seen in the top sections of the sediment, which decrease with depth. However, the cholesterol behaves in a similar manner, and the ratio brassicasterol/cholesterol is fairly uniform at all depths, indicating either a comparable degradation rate with no change in source or different degradation rates and a change in source.

Multivariate analysis

Multivariate statistical analyses such as principal component analysis of a range of lipid biomarkers (e.g., other sterols, fatty acids, and fatty alcohols) enable identification of compounds that have similar origins or behaviour. An example can be seen in the loadings plot for sediment samples from the Mawddach Estuary, Wales.

Principal Component Analysis of several lipid biomarkers from the Mawddach Esturay - brassicasterol is highlighted in red
The location of brassicasterol in this figure (shown in red) indicates that the distribution of this compound is similar to that of the short-chain fatty acids and alcohols, which are known to be of marine origin. The terrestrially derived biomarkers such as β-sitosterol are on the opposite side of the figure and are mutually exclusive.

References








Got something to say? Make a comment.
Your name
Your email address
Message