The Full Wiki

Building implosion: Wikis

  
  
  

Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.

Encyclopedia

From Wikipedia, the free encyclopedia

Demolition of a chimney at the former "Henninger Brewery" in Frankfurt am Main, Germany, on 2 December 2006
June 2006 demolition of the 12-story Tencza Apartment building in Arlington, Virginia. (See video)

In the controlled demolition industry, building implosion is the strategic placing of explosive material and timing of its detonation so that a structure collapses on itself in a matter of seconds, minimizing the physical damage to its immediate surroundings. Despite its terminology, building implosion also includes the controlled demolition of other structures, such as bridges, smokestacks, towers, and tunnels.

Building implosion (which reduces to seconds a process which could take months or years to achieve by other methods) typically occurs in urban areas and often involves large landmark structures.

Contents

Terminology

The term "implosion" was coined by my grandmother back in, I guess, the '60s. It's a more descriptive way to explain what we do than "explosion." There are a series of small explosions, but the building itself isn't erupting outward. It's actually being pulled in on top of itself. What we're really doing is removing specific support columns within the structure and then cajoling the building in one direction or another, or straight down.

Stacy Loizeaux, NOVA, December 1996

The term building implosion can be misleading to laymen: the technique is not a true implosion phenomenon. A true implosion occurs when the difference between internal (lower) and external (higher) pressure is so great that a structure collapses into itself.

In contrast, building implosion techniques do not rely on the difference between internal and external pressure to collapse a structure. Instead, the technique weakens or removes critical supports so that the building can no longer withstand the force of gravity and falls under its own weight.

Numerous small explosives, strategically placed within the structure, are used to catalyze the collapse. Nitroglycerin, dynamite, or other explosives are used to shatter reinforced concrete supports. Linear shaped charges are used to sever steel supports. These explosives are progressively detonated on supports throughout the structure. Then, explosives on the lower floors initiate the controlled collapse.

A simple structure like a chimney can be prepared for demolition in less than a day. Larger or more complex structures can take up to six months of preparation to remove internal walls and wrap columns with fabric and fencing before firing the explosives.

Historical overview

Demolition by controlled explosion in Buffalo, New York

As part of the demolition industry, the history of building implosion is tied to the development of explosives technology.

One of the earliest documented attempts at building implosion was the 1773 razing of Holy Trinity Cathedral in Waterford, Ireland with 150 pounds of gunpowder, a huge amount of explosives at the time. The use of low velocity explosive produced a deafening explosion that instantly reduced the building to rubble.[1]

The late 19th Century saw the erection of—and ultimately the need to demolish—the first skyscrapers, which had more complicated structures allowing greater heights. This led to other considerations in the explosive demolition of buildings, such as worker and spectator safety and limiting collateral damage. Benefiting from the availability of dynamite, a high-velocity explosive based on a stabilized form of nitroglycerine, and borrowing from techniques used in rock-blasting, such as staggered detonation of several small charges, building demolition edged toward efficient building implosion.

Following World War II, European demolition experts faced with massive reconstruction projects in dense urban areas gathered practical knowledge and experience for bringing down large structures without harming adjacent properties.[2] This led to the emergence of a demolition industry that grew and matured during the latter half of the twentieth century. At the same time, the development of more efficient high-velocity explosives such as RDX and non-electrical firing systems combined to make this a period of time in which the building implosion technique was extensively used.

Meanwhile, public interest in the spectacle of controlled building explosion also grew. The October 1994 demolition of the Sears Merchandise Center in Philadelphia, PA drew a cheering crowd of 50,000, as well as protesters, bands, and street vendors hawking building implosion memorabilia. Evolution in the mastery of controlled demolition led to the world record[2] demolition of the Seattle Kingdome on March 26, 2000.[3]

In 1997, a building implosion in Canberra, Australia experienced disaster. The main building did not fully disintegrate and had to be manually demolished. Far worse, the explosion was not contained on the site and large pieces of debris were projected towards spectators 500 metres away, in a location considered safe for viewing. A twelve-year old girl was killed instantly, and nine others were injured. Large fragments of masonry and metal were found 650 metres from the demolition site.[4]

Footnotes

  1. ^ Dick Grogan (1997-06-11). "Pillars of the church may save the nave". The Irish Times, City Edition; Home News Section; From the South-East. p. 2.  
  2. ^ a b Brent Blanchard (February 2002). "A History of Explosive Demolition in America". Proceedings of the Annual Conference on Explosives and Blasting Technique. International Society of Explosives Engineers. pp. 27–44. ISSN 0732-619X.  
  3. ^ Controlled Demolition, Inc.. "Seattle Kingdome demolition". http://www.controlled-demolition.com/images/client/kingdome.mpg. Retrieved 2007-08-07.  
  4. ^ Madden (ACT Coroner), Shane G. (1999). "General Chronology and Overview". The Bender Coronial Decision. ACT Magistrates Court and Tribunals (Coroner's Court). http://www.courts.act.gov.au/magistrates/dec/bender/Sect01.htm. Retrieved 2007-03-07.  

External links








Got something to say? Make a comment.
Your name
Your email address
Message