Buoyancy: Wikis

Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.

Encyclopedia

The forces at work in buoyancy

In physics, buoyancy (pronounced /ˈbɔɪ.ənsi/) is the upward force, caused by fluid pressure, that keeps things afloat. This can occur only in an accelerated frame of reference (such as gravity or a centrifugal forces) defining a "downward" direction along the acceleration. The net upward buoyancy force is equal to the magnitude of the weight of fluid displaced by the body. This force enables the object to float.

Archimedes' principle

Archimedes' principle is named after Archimedes of Syracuse, who first discovered this law.[1] His treatise, On floating bodies, proposition 5 states, that

Any floating object displaces its own weight of fluid.

For more general objects, floating and sunken, and in gases as well as liquids (i.e. a fluid), Archimedes' principle may be stated thus in terms of forces:

Any object, wholly or partially immersed in a fluid, is buoyed up by a force equal to the weight of the fluid displaced by the object.

Archimedes of Syracuse

with the caveat that for a sunken object the volume of displaced fluid is the volume of the object, and for a floating object on a liquid, the weight of the displaced liquid is the weight of the object.

More tersely: Buoyancy = weight of displaced fluid.

Archimedes' principle does not consider the surface tension (capillarity) acting on the body.[3]

The weight of the displaced fluid is directly proportional to the volume of the displaced fluid (if the surrounding fluid is of uniform density). In simple terms, the principle states that the buoyant force on an object is going to be equal to the weight of the fluid displaced by the object. Thus, among completely submerged objects with equal masses, objects with greater volume have greater buoyancy.

Suppose a rock's weight is measured as 10 newtons when suspended by a string in a vacuum. Suppose that when the rock has been lowered by the string into water, it displaces water of weight 3 newtons. The force it then exerts on the string from which it hangs would be 10 newtons minus the 3 newtons of buoyant force: 10 − 3 = 7 newtons. Buoyancy reduces the apparent weight of objects that have sunk completely to the sea floor. It is generally easier to lift an object up through the water than it is to pull it out of the water.

Assuming Archimedes' principle to be reformulated as follows,

$\mbox{apparent immersed weight} = \mbox{weight} - \mbox{weight of displaced fluid}\,$

then inserted into the quotient of weights, which has been expanded by the mutual volume

$\frac { \mbox{density}} { \mbox {density of fluid} } = \frac { \mbox{weight}} { \mbox {weight of displaced fluid} } \,$,

yields the formula below. The density of the immersed object relative to the density of the fluid can easily be calculated without measuring any volumes:

$\frac { \mbox {density of object}} { \mbox {density of fluid} } = \frac { \mbox {weight}} { \mbox {weight} - \mbox {apparent immersed weight}}\,$

(This formula is used for example in describing the measuring principle of a dasymeter and of hydrostatic weighing.)

Example: If you drop wood into water buoyancy will keep it afloat. Example: A helium balloon in a moving car. In increasing speed or driving a curve, the air inside the car experiences an acceleration, the balloon moves in the opposite direction.

1. ^ Acott, Chris (1999). "The diving "Law-ers": A brief resume of their lives.". South Pacific Underwater Medicine Society journal 29 (1). ISSN 0813-1988. OCLC 16986801. Retrieved 2009-06-13. .
2. ^ "The works of Archimedes". p. 257. Retrieved 11 March 2010. "Any solid lighter than a fluid will, if placed in the fluid, be so far immersed that the weight of the solid will be equal to the weight of the fluid displaced."
3. ^

Forces and equilibrium

This is the equation to calculate the pressure inside a fluid in equilibrium. The corresponding equilibrium equation is:

$\mathbf{f}+\operatorname{div}\,\sigma=0$

where f is the force density exerted by some outer field on the fluid, and σ is the stress tensor. In this case the stress tensor is proportional to the identity tensor:

$\sigma_{ij}=-p\delta_{ij}.\,$

Here $\delta_{ij}\,$ is the Kronecker delta. Using this the above equation becomes:

$\mathbf{f}=\nabla p.\,$

Assume the outer force field is conservative, that is it can be written as the negative gradient of some scalar valued function:

$\mathbf{f}=-\nabla\Phi.\,$

Then we have:

$\nabla(p+\Phi)=0 \Longrightarrow p+\Phi = \text{constant}.\,$

Hence the shape of the open surface of a fluid equals the equipotential plane of the applied outer conservative force field. Let the z-axis point downward. In our case we have gravity, so Φ = −ρgz where g is the gravitational acceleration, ρ is the mass density of the fluid. Let the constant be zero, that is the pressure zero where z is zero. So the pressure inside the fluid, when it is subject to gravity, is

$p=\rho g z.\,$

So pressure increases with depth below the surface of a liquid, as z denotes the distance from the surface of the liquid into it. Any object with a non-zero vertical depth will have different pressures on its top and bottom, with the pressure on the bottom being greater. This difference in pressure causes the upward buoyancy forces.

The buoyant force exerted on a body can now be calculated easily, since we know the internal pressure of the fluid. We know that the force exerted on the body can be calculated by integrating the stress tensor over the surface of the body:

$\mathbf{F}=\oint \sigma \, d\mathbf{A}$

The surface integral can be transformed into a volume integral with the help of the Gauss–Ostrogradsky theorem:

$\mathbf{F}=\int \operatorname{div}\sigma \, dV = -\int \mathbf{f}\, dV = -\rho \mathbf{g} \int\,dV=-\rho \mathbf{g} V$

where V is the measure of the volume in contact with the fluid, that is the volume of the submerged part of the body. Since the fluid doesn't exert force on the part of the body which is outside of it.

The magnitude of buoyant force may be appreciated a bit more from the following argument. Consider any object of arbitrary shape and volume V surrounded by a liquid. The force the liquid exerts on an object within the liquid is equal to the weight of the liquid with a volume equal to that of the object. This force is applied in a direction opposite to gravitational force that is, of magnitude:

$\rho V_\text{disp}\, g, \,$

where ρ is the density of the liquid, V disp is the volume of the displaced body of liquid, and g is the gravitational acceleration at the location in question.

If we replace this volume of liquid by a solid body of the exact same shape, the force the liquid exerts on it must be exactly the same as above. In other words the "buoyant force" on a submerged body is directed in the opposite direction to gravity and is equal in magnitude to

$\rho V g. \,$

The net force on the object is thus the sum of the buoyant force and the object's weight

$F_\text{net} = m g - \rho V g \,$

If the buoyancy of an (unrestrained and unpowered) object exceeds its weight, it tends to rise. An object whose weight exceeds its buoyancy tends to sink.

Commonly, the object in question is floating in equilibrium and the sum of the forces on the object is zero, therefore;

$mg = \rho V g, \,$

and therefore

$m = \rho V. \,$

showing that the depth to which a floating object will sink (its "buoyancy") is independent of gravitational acceleration regardless of geographic location.

(Note: If the liquid in question is seawater, it will not have the same density (ρ) at every location. For this reason, a ship may display a Plimsoll line.)

It is common to define a buoyant mass mb that represents the effective mass of the object with respect to gravity

$m_b = m_\mathrm{o} \cdot \left( 1 - \frac{\rho_\mathrm{f}}{\rho_\mathrm{o}} \right)\,$

where $m_{\mathrm{o}}\,$ is the true (vacuum) mass of the object, whereas ρo and ρf are the average densities of the object and the surrounding fluid, respectively. Thus, if the two densities are equal, ρo = ρf, the object appears to be weightless. If the fluid density is greater than the average density of the object, the object floats; if less, the object sinks.

Another possible formula for calculating buoyancy of an object is by finding the weight of that particular object in the air (calculated in newtons), and weight of that object in the water (in newtons). To find the buoyancy of the object with this particular information is by using this formula:

'Bouyancy = weight of object in air - weight of object in water' The final result would be measured in newtons.

Stability

A floating object is stable if it tends to restore itself to an equilibrium position after a small displacement. For example, floating objects will generally have vertical stability, as if the object is pushed down slightly, this will create a greater buoyant force, which, unbalanced against the weight force will push the object back up.

Rotational stability is of great importance to floating vessels. Given a small angular displacement, the vessel may return to its original position (stable), move away from its original position (unstable), or remain where it is (neutral).

Rotational stability depends on the relative lines of action of forces on an object. The upward buoyant force on an object acts through the centre of buoyancy, being the centroid of the displaced volume of fluid. The weight force on the object acts through its center of gravity. An object will be stable if an angular displacement moves the line of action of these forces to set up a 'righting moment'. See also Angle of loll.

Compressive fluids

The atmosphere's density depends upon altitude. As an airship rises in the atmosphere, its buoyancy decreases as the density of the surrounding air decreases. As a submarine expels water from its buoyancy tanks (by pumping them full of air) it rises because its volume is constant (the volume of water it displaces if it is fully submerged) as its weight is decreased.

Compressible objects

As a floating object rises or falls, the forces external to it change and, as all objects are compressible to some extent or another, so does the object's volume. Buoyancy depends on volume and so an object's buoyancy reduces if it is compressed and increases if it expands.

If an object at equilibrium has a compressibility less than that of the surrounding fluid, the object's equilibrium is stable and it remains at rest. If, however, its compressibility is greater, its equilibrium is then unstable, and it rises and expands on the slightest upward perturbation, or falls and compresses on the slightest downward perturbation.

Submarines rise and dive by filling large tanks with seawater. To dive, the tanks are opened to allow air to exhaust out the top of the tanks, while the water flows in from the bottom. Once the weight has been balanced so the overall density of the submarine is equal to the water around it, it has neutral buoyancy and will remain at that depth. Normally, precautions are taken to ensure that no air has been left in the tanks. If air were left in the tanks and the submarine were to descend even slightly, the increased pressure of the water would compress the remaining air in the tanks, reducing its volume. Since buoyancy is a function of volume, this would cause a decrease in buoyancy, and the submarine would continue to descend.

The height of a balloon tends to be stable. As a balloon rises it tends to increase in volume with reducing atmospheric pressure, but the balloon's cargo does not expand. The average density of the balloon decreases less, therefore, than that of the surrounding air. The balloon's buoyancy decreases because the weight of the displaced air is reduced. A rising balloon tends to stop rising. Similarly, a sinking balloon tends to stop sinking.

Density

A pound coin floats in mercury due to the buoyant force upon it.

If the weight of an object is less than the weight of the displaced fluid when fully submerged, then the object has an average density that is less than the fluid and has a buoyancy that is greater than its own weight. If the fluid has a surface, such as water in a lake or the sea, the object will float at a level where it displaces the same weight of fluid as the weight of the object. If the object is immersed in the fluid, such as a submerged submarine or air in a balloon, it will tend to rise. If the object has exactly the same density as the fluid, then its buoyancy equals its weight. It will remain submerged in the fluid, but it will neither sink nor float. An object with a higher average density than the fluid has less buoyancy than weight and it will sink. A ship will float even though it may be made of steel (which is much denser than water), because it encloses a volume of air (which is much less dense than water), and the resulting shape has an average density less than that of the water.

Simple English

Simple English Wiktionary has the word meaning for:

In physics, buoyancy (pronounced /ˈbɔɪ.ənsi/) is a force on an object making that object rise or move upward. It comes from the Spanish word for "float", boyar. Buoyancy is made by the difference in pressure put on the object by the Fluid or air that the object is in.

The net upward buoyancy force is equal to the magnitude of the weight of fluid that is displaced by the body. This force enables the object to float or at least to seem lighter. Buoyancy is important for many vehicles such as boats, ships, balloons, and blimps.

Density

If the object has exactly the same density as the liquid, then its buoyancy is the same as its weight. It will not sink or float.

An object with a higher average density than the fluid has less buoyancy than weight and it will sink.

A ship floats because although it is made of steel which is more dense than water, it encloses a volume of air and the resulting shape has an average density less than that of the water.