The Full Wiki

More info on DEMO

DEMO: Wikis

  
  

Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.

Encyclopedia

From Wikipedia, the free encyclopedia

DEMO (DEMOnstration Power Plant) is a proposed nuclear fusion power plant that is intended to build upon the expected success of the ITER (originally an acronym for International Thermonuclear Experimental Reactor) experimental nuclear fusion reactor. Whereas ITER's goal is to produce 500 million watts of fusion power for at least 500 seconds, the goal of DEMO will be to produce at least four times that much fusion power on a continual basis. Moreover, while ITER's goal is to produce 10 times as much power as is required for breakeven, DEMO's goal is to produce 25 times as much power. DEMO's 2 gigawatts of thermal output will be on the scale of a modern electric power plant.[1] Also notably, DEMO is intended to be the first fusion reactor to generate electrical power. Earlier experiments, such as ITER, merely dissipate the thermal power they produce into the atmosphere as steam.

To achieve its goals, DEMO must have linear dimensions about 15% larger than ITER and a plasma density about 30% greater than ITER. As a prototype commercial fusion reactor DEMO could make fusion energy (which does not have the problems associated with fossil fuels or fission energy) available within 20 years. Subsequent commercial fusion reactors could be built for nearly a quarter of the cost of DEMO if things go according to plan.[2][3]

While fusion reactors like ITER and DEMO will not produce transuranic wastes, some of the components of the ITER and DEMO reactors will become radioactive due to neutrons impinging upon them. It is hoped that careful material choice will mean that the wastes produced in this way will have much shorter half lives than the waste from fission reactors, with wastes remaining harmful for less than one century. The process of manufacturing tritium currently produces long-lived waste, but both ITER and DEMO, it is hoped, will produce their own tritium, dispensing with the fission reactor currently used for this purpose.

Timeline

The following timetable was presented at the IAEA Fusion Energy Conference in 2004 by Prof. Sir Chris Llewellyn Smith.[2] These dates are conceptual and as such are subject to change.

  • Conceptual design is to be complete by 2017
  • Engineering design is to be complete by 2024
  • The first 'Construction Phase' is to last from 2024 to 2033
  • The first phase of operation is to last from 2033 to 2038
  • The plant is then to be expanded/updated
  • The second phase of operation is to last from 2040 onwards

How the reactor will work

The deuterium-tritium (D-T) fusion reaction is considered the most promising for producing fusion power.

When deuterium and tritium fuse, the two nuclei come together to form a helium nucleus (an alpha particle) and a high energy neutron.

{}^{2}_{1}\mbox{H} + {}^{3}_{1}\mbox{H} \rightarrow {}^{4}_{2}\mbox{He} + {}^{1}_{0}\mbox{n} + 17.6 \mbox{ MeV}

DEMO will be constructed once designs which solve the many problems of current fusion reactors are engineered. These problems include: containing the plasma fuel at high temperatures, maintaining a great enough density of reacting ions, and capturing high-energy neutrons from the reaction without melting the walls of the reactor.

  • The activation energy for fusion is very large because the protons in each nucleus strongly repel one another; they are both positively charged. In order to fuse, the nuclei must be within 1 femtometre (1 × 10−15 metres) of each other, which is achievable using very high temperatures.
  • DEMO, a tokamak reactor, requires both dense plasma and high temperatures for the fusion reaction to be sustained.
  • High temperatures give the nuclei enough energy to overcome their electrostatic repulsion. This requires temperatures in the region of 100,000,000 °C, perhaps using energy from microwaves, ion beams, or neutral beam injection.
  • Containment vessels melt at these temperatures, so the plasma is to be kept away from the walls using magnetic confinement.

Once fusion has begun, high energy neutrons will pour out of the plasma, not affected by the strong magnetic fields (see neutron flux). Since the neutrons receive the majority of the energy from the fusion, they will be the fusion reactor's source of energy output.

  • The tokamak containment vessel will have a lining composed of ceramic or composite tiles containing tubes in which low temperature liquid lithium will flow.
  • Lithium readily absorbs high speed neutrons to form helium and tritium.
  • The lithium is processed to remove the helium and tritium.
  • The deuterium and tritium are added in carefully measured amounts to the plasma.
  • This increase in temperature is passed on to (pressurized) liquid water in a sealed, pressurized pipe.
  • The hot water from the pipe will be used to boil water under lower pressure in a heat exchanger.
  • The steam from the heat exchanger will be used to drive the turbine of a generator, to create an electrical current.

The DEMO project is planned to build upon and improve the concepts of ITER. Since it is only proposed at this time, many of the details, including heating methods and the method for the capture of high energy neutrons, are still undetermined.

References

  1. ^ "Demonstration Fusion Reactors". Fusion for Energy. European Joint Undertaking for ITER and the Development of Fusion Energy. http://fusionforenergy.europa.eu/3_4_demo_en.htm. Retrieved 2008-11-17.  
  2. ^ a b "Beyond ITER". The ITER Project. Information Services, Princeton Plasma Physics Laboratory. http://www.iter.org/Future-beyond.htm. Retrieved 2006-11-11.  
  3. ^ "Overview of EFDA Activities". EFDA. European Fusion Development Agreement. http://www.efda.org/about_efda/downloads/EFDAoverview.ppt. Retrieved 2006-11-11.  

Simple English

Demo may mean one of the following:








Got something to say? Make a comment.
Your name
Your email address
Message