A darcy (or darcy unit) and millidarcies (mD) are units of permeability, named after Henry Darcy. They are not SI units, but they are widely used in petroleum engineering and geology. Like other measures of permeability, a darcy has the same units as area.
Contents |
Permeability measures the ability of fluids to flow through rock (or other porous media). The darcy is defined using Darcy's law, which can be written as:

where:
The darcy is referenced to a mixture of unit systems. A medium with a permeability of 1 darcy permits a flow of 1 cm³/s of a fluid with viscosity 1 cP (1 mPa·s) under a pressure gradient of 1 atm/cm acting across an area of 1 cm². A millidarcy (mD) is equal to 0.001 darcy.
The darcy is named after Henry Darcy. Rock permeability is usually expressed in millidarcies (mD) because rocks found in oil and water reservoirs typically have permeabilities in the range of 5 to 500 mD, just a fraction of a whole darcy.
The odd combination of units comes from Darcy's original studies of water flow through columns of sand. Water has a viscosity of 1.0019 cP at about room temperature.
Converted to SI units, 1 darcy is equivalent to 9.869233×10−13 m² or 0.9869233 (µm)². This conversion is usually approximated as 1 (µm)². Note that this is the reciprocal of 1.013250—the conversion factor from atmospheres to bars.
|
Singular |
Plural |
Darcy
Darcy is both a given name and a surname. See Category:Darcy (surname) and Darcy (surname).
|
|