The Full Wiki

Displace (ship): Wikis


Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.


(Redirected to Displacement (ship) article)

From Wikipedia, the free encyclopedia

As weight is added to a ship, it submerges. Designated displacement is the ship's weight when fully loaded and submerged to her load lines.

A ship's displacement is its mass at any given time, generally expressed in metric tons or long tons. The term is often used to mean the ship's mass when it is loaded to its maximum capacity. A number of synonymous terms exist for this maximum mass, such as loaded displacement, full load displacement and designated displacement.[1] Displacement is a measurement of mass, and should not be confused with similarly named measurements of volume or capacity such as net tonnage, gross tonnage, or deadweight tonnage.

The word displacement refers to the mass of the water that the ship displaces while floating.[2] Another way of thinking about displacement is the amount of water that would spill out of a completely filled container were the ship to be placed into it. A floating ship always displaces an amount of water of the same mass as the ship.[2]

The density (mass per unit of volume) of water can vary. For example, the average density of seawater at the surface of the ocean is 1025 kg/m³ (10.25 lb/ga, 8.55 lb/US gallon), fresh water on the other hand has a density of about 1000 kg/m³ (10.00 lb/ga, 8.35 lb/US gallon).[1] Consider a 100-ton ship passing from a saltwater sea into a freshwater river. It always displaces exactly 100 tons of water, but it has to displace a greater volume of fresh water to amount to 100 tons. Therefore it would sit slightly lower in the water in the freshwater river than it would in the saltwater sea.

It can be useful to know a ship's displacement when it is unloaded or partially loaded. Terms for these measurements include light displacement, standard displacement, and normal displacement. These terms are defined fully below.



Shipboard stability programs are often used to calculate a ship's current displacement.

The traditional method for determining a ship's actual displacement is by use of draft marks.[3] A merchant vessel has six sets of draft marks: forward, midships, and astern on both the port and starboard sides.[3] These drafts can allow the determination of a ship's displacement to an accuracy of 0.5%.[3] First, the individual drafts are averaged to find a mean draft.[4] Then the mean draft is entered into the ship's hydrostatic tables, giving a displacement.[5]

Computers have been used to assist in hydrostatic calculations, such as determining displacement, since the 1950s.[6] The first were mechanical computers, similar to slide rules which could convert cargo levels to values such as deadweight tonnage, draft, and trim.[6] Since the 1970s, personal computer-based programs have been developing to meet these needs.[6]

Displacement under special conditions

A number of measurements of displacement are defined when the ship is in a special state, such as when it is completely full or completely empty. These special types of displacement are discussed below.


Full load or loaded displacement

Full load displacement and loaded displacement have almost identical definitions.

Full load displacement is defined as the displacement of a vessel when floating at her greatest allowable draft as established by the classification societies.[7] For warships, an arbitrary full load condition is established.[7]

Loaded displacement is defined as the mass of the ship including cargo, passengers, fuel, water, stores, dunnage and such other items necessary for use on a voyage, which brings the ship down to her load draft.[8]

Standard displacement

The standard displacement, also known as Washington disp, is a term defined in the Washington Naval Treaty.[9] It is defined as the displacement of the ship complete, fully manned, engined, and equipped ready for sea, including all armament and ammunition, equipment, outfit, provisions and fresh water for crew, miscellaneous stores, and implements of every description that are intended to be carried in war, but without fuel or reserve feed water on board.[9]

Light displacement

Light displacement is defined as the mass of the ship excluding cargo, fuel, ballast, stores, passengers, crew, but with water in boilers to steaming level.[8]

Normal displacement

This rare term has been used to mean the ship's displacement "with all outfit, and two-thirds supply of stores, ammunition, etc., on board."[10]


See also


  1. ^ a b Turpin and McEwen, 1980.
  2. ^ a b George, 2005, p. 68.
  3. ^ a b c George, 2005. p.5.
  4. ^ George, 2005. p.14–15.
  5. ^ George, 2005. p. 465.
  6. ^ a b c George, 2005. p. 262.
  7. ^ a b Department of the Navy, 1942.
  8. ^ a b Military Sealift Command.
  9. ^ a b United States of America, 1922. Ch II, Part 4.
  10. ^ United States Naval Institute, 1897. p 809.



Got something to say? Make a comment.
Your name
Your email address