The Full Wiki

Future Combat Systems manned ground vehicles: Wikis

Advertisements
  
  

Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.

Encyclopedia

From Wikipedia, the free encyclopedia

FCS manned ground vehicles
XM1202 MCS.jpg
XM1202 Mounted Combat System vehicle illustration
Type Tracked armored fighting vehicles
Place of origin  United States
Specifications
Crew Varies from 2-4 depending on vehicle

Primary
armament
Most vehicles armed with a cannon
Secondary
armament
Most vehicles armed with a machine gun

The Future Combat Systems manned ground vehicles family was a family of lighter and more transportable ground vehicles that were part of the United States Army's Future Combat Systems (FCS) program. The ground vehicles were to be based on a common tracked vehicle chassis.[1] The MGVs are to be superseded by the BCT Ground Combat Vehicle Program.

Contents

History

The Department of Defense announced budget cuts in April 2009[2] resulted in the cancellation of the FCS manned ground vehicles family.[3][4] The Army plans to restart from the beginning on manned ground vehicles.[5] The MGVs are to be superseded by the BCT Ground Combat Vehicle Program.

Types

Advertisements

Reconnaissance and surveillance vehicle

XM1201 Reconnaissance and Surveillance Vehicle (RSV)

The XM1201 Reconnaissance and Surveillance Vehicle (RSV) featured a suite of advanced sensors to detect, locate, track, classify and automatically identify targets under all climatic conditions, day or night.

The suite included a mast-mounted, long-range optoelectronic infrared sensor, an emitter mapping sensor for radio frequency interception and direction finding, chemical sensor and a multifunction radio frequency sensor.

The RSV also features the onboard capability to conduct automatic target detection, aided target recognition and level-one sensor fusion. To further enhance the scout's capabilities, the RSV is also equipped with Unattended Ground Sensors, a Small Unmanned Ground Vehicle with various payloads and two unmanned aerial vehicles. It is armed with a 30 mm MK44 cannon and a coaxial 7.62 mm M240 machine gun.

Mounted combat system

XM1202 Mounted Combat System (MCS)

The XM1202 Mounted Combat System was a planned U.S. Army tank. It was to be small enough to be able to fit two units inside a C-17 or one inside a smaller C-130 Hercules transport.

The Mounted Combat System (MCS) was to provide both direct and Beyond-Line-of-Sight (BLOS) offensive firepower capability, allowing for in-depth destruction of point targets up to 8 km (5 mi) away. This requires the use of an integrated sensor network to detect enemy forces.

The MCS was to have had a crew of two and to be armed with a 120 mm main gun, a .50 caliber machine gun, and a 40 mm automatic grenade launcher.[6]

The MCS was intended to deliver precision fire at a rapid rate, in order to destroy multiple targets at standoff ranges quickly, and will complement the other systems in the unit of action. It will be capable of providing direct support to the dismounted infantry in an assault, defeating bunkers, and breaching walls during tactical assaults. It was also intended to be highly mobile, in order to maneuver out of contact and into positions of advantage; given the vehicle's light weight, this is especially important.

The common MGV chassis was required to provide full protection from 30 mm and 45 mm cannon fire in a 60 degree arc opening towards the front of the vehicle. 360 degree protection must also be provided from small arms fire up to 14.5 mm heavy machine gun and 155 mm artillery shell air-bursts. Protection from higher caliber rounds as well as anti-tank guided missiles will be provided by an active protection system manufactured by Raytheon known as "Quick Kill".

The MCS would consist of the common Manned Ground Vehicle chassis and autoloading line-of-sight and BLOS capability.

Non-line-of-sight cannon

XM1203 Non-Line-of-Sight Cannon (NLOS-C) prototype in 2009

The XM1203 Non-Line-of-Sight Cannon (NLOS Cannon) was a mobile 155 mm cannon intended to provide improved responsiveness and lethality to the "unit of action" (UA) commander as part of the US Army's Future Combat Systems project. This self-propelled armored artillery piece provides networked, extended-range targeting, and precision attack of point and area targets in support of other combat units with a suite of munitions that include special purpose capabilities. The Non-Line-of-Sight Cannon provides sustained fire for close support and destructive fire for tactical standoff engagement. The NLOS Cannon uses technology from the canceled XM2001 Crusader.

NLOS-C was a proposed system in development to be part of the FCS environment and funded by the U.S. Congress shortly after cancellation of the XM2001 Crusader M109 replacement. It is an 18-ton class vehicle that would have been a replacement for current vehicle systems in the 40-60 ton weight class. It would provide a level of air transportability that current M109 systems cannot at present match.

The system's primary purpose is to provide responsive fire in support of the FCS Combined Arms Battalions (CABs), and their subordinate units in concert with line-of-sight, Beyond-Line-of-Sight (BLOS), Non-Line-of-Sight (NLOS), external and Joint capabilities.

The system as proposed looks to add capabilities that the current M109 systems do not offer. One of the proposed systems advantages is the ability to switch shell types quickly on a one by one basis allowing an illumination round to be followed by a point detonation round, to be followed by an area effect round. This would give the system the ability to fire different rounds as required by different fire calls or to change types of shells. For instance, destroying a building then engaging anyone fleeing the area with the next round.

The rate of fire in the proposed system would enable more rounds sent downrange in a given amount of time allowing more fire power per system than is available with the current M109 system. Another capability offered by the NLOS Cannon is the Multiple Rounds Simultaneous Impact mission or MRSI (pronounced mercy) mission. A MRSI mission is where the cannon fires several rounds at different trajectories allowing the rounds to impact on the same target at the same time, resulting in little or no reaction time for the enemy to adjust its position. This is accomplished by including the autoloader from the canceled Crusader project which achieves the goals of a much improved fire rate with a reduction in required crew.[7]

The proposed system is envisioned as part of a fast mobile force networked via improved communications and data capabilities to allow rapid response with enhanced accuracy with the view to reducing friendly fire incidents along with lessened collateral damage, while providing superior protective artillery fire to units requiring gunfire support. Navigation of the vehicle and targeting information are provided via GPS and networked information systems.[8]

Improvements in the refueling arrangements and automation of ammunition reloading allow reduced downtime for logistic functions that would otherwise leave the system unavailable for combat support operations. This also allows the system to use a crew of 2 instead of 5. This is desirable as staffing continues to be a major contributor to life cycle cost of any combat system.

The main chassis of the NLOS-C was based on the Manned Ground Vehicle (MGV) platform being developed for all manned ground platforms under the Future Combat Systems Program, giving the NLOS-C a high commonality with other MGV-based platforms, especially the NLOS-M (Non-Line-of-Sight Mortar). Use of a common chassis reduces the need for specialized training of personnel and allows for faster fielding of repairs. The MGV platform utilizes a hybrid diesel-electric propulsion system. The MGV also employs numerous weight-saving features, including composite armor, composite and titanium structural elements, and continuous band tracks.

U.S. Senator Jim Inhofe and Chief of Staff of the Army Gen. George W. Casey, Jr. traveled to BAE Systems in Minneapolis, Minnesota in late May 2008 for the rollout of the first Non-Line-of-Sight Cannon prototype. Prototype 1 made its first public appearance on the National Mall in Washington on June 11, 2008. A total of eight prototypes were delivered to the U.S. Army Yuma Proving Ground, Arizona, by 2009.[9]

Non-line-of-sight mortar

XM1204 Non-Line-of-Sight Mortar (NLOS-M)

The XM1204 Non-Line-of-Sight Mortar (NLOS-M) was a turreted, self-propelled mortar vehicle with a four person crew. It was capable of firing at targets outside of the crew's line of sight (known as indirect fire).

The NLOS-M had a breech-loaded M1064 that fired 120 mm mortar munitions including the Precision Guided Mortar Munition (PGMM). It had a fully automated firing control system and a manually-assisted, semi-automated ammunition loading system. It uses a crew of 3.

The NLOS-M provides fires on-demand to engage complex and simultaneous target sets. As part of an NLOS-M battery, individual NLOS-M vehicles will provide precision-guided fires to destroy high-value targets, protective fires to suppress and obscure the enemy, and illumination fires. All of these will be in close support of infantry maneuver units.

The FCS command, control, communications, computers, intelligence, surveillance and reconnaissance (C4ISR) network enables the NLOS-M fire control system to conduct semi- to autonomous computation of technical fire direction, automatic gun lay, preparation of the ammunition for firing, and mortar round firing.

In January 2003 United Defense, now part of BAE Systems, was selected by the Army and the FCS Lead Systems Integrators (Boeing and SAIC) to develop and build the NLOS-M.

Recovery and maintenance vehicle

XM1205 Field Recovery and Maintenance Vehicle (FRMV)

The XM1205 Field Recovery and Maintenance Vehicle (FRMV) was the recovery and maintenance system for employment within both the unit of action (UA) and unit of employment (UE) and contributes to sustaining and generating combat power to the Future Force structure. Each UA will have a small number of 2-3 man combat repair teams within the organic Forward Support Battalion (FSB) to perform field maintenance requirements beyond the capabilities of the crew chief/crew, more in-depth battle damage assessment repair (BDAR), and limited recovery operations. The recovery vehicle is designed to hold a crew of three with additional space for three additional recovered crew. The FRMV has a close combat support weapon (CCSW) and a 40 mm Mk 19 grenade launcher.

Infantry carrier vehicle

XM1206 Infantry Carrier Vehicle (ICV)

The XM1206 Infantry Carrier Vehicle (ICV) was a set of similar vehicles for transporting and supporting ground troops. The ICV featured a crew of 2 and space for 9 passengers. It is armed with a 30 mm MK44 cannon and a 7.62 mm machine gun.

The ICV consists of four platform versions: a Company Commander; a Platoon Leader; a Rifle Squad; and a Weapons Squad. All four platform versions have similar exteriors to prevent targeting of a specific ICV versions.

The Rifle Squad ICV and Weapons Squad ICV each deliver 9-person infantry squads to a close battle and support the squad by providing offensive and defensive fire, while carrying the majority of the soldiers' equipment. The ICV can move, shoot, communicate, detect threats, and protect crew and critical components under all climatic conditions, day or night.

The squad would have access to Army and joint fire delivery systems from external sources (e.g. the XM1203 Non-Line-of-Sight Cannon) to enhance the squad's range, precision, or quantity of fire. Networking with other components of the unit of action permits rapid identification of targets and improves situational awareness.

Medical vehicle

XM1207 Medical Vehicle-Evacuation (MV-E)/XM1208 Medical Vehicle-Treatment (MV-T)

The XM1207/8 Medical Vehicle was designed to provide advanced trauma life support within 1 hour to critically injured soldiers. The Medical Vehicle serves as the primary medical system within the unit of action (UA) and will have two mission modules: Evacuation and Treatment. The time-sensitive nature of treating critically injured soldiers requires an immediately responsive force health protection system with an expedient field evacuation system. The XM1207 FCS Medical Vehicle-Evacuation (MV-E) vehicle allows trauma specialists, maneuvering with combat forces, to be closer to the casualty’s point-of-injury and is used for casualty evacuation. The XM1208 Medical Vehicle-Treatment (MV-T) vehicle enhances the ability to provide Advanced Trauma Management (ATM)/Advanced Trauma Life Support (ATLS) treatments and procedures forward for more rapid casualty interventions and clearance of the battlespace. Both FCS Medical Vehicle mission modules will be capable of conducting medical procedures and treatments using installed networked telemedicine interfaces, Medical Communications for Combat Casualty Care and the Theater Medical Information Program (TMIP).

Command and control vehicle

The XM1209 Command and Control Vehicle (C2V) was to provide for information management of the integrated network of communications and sensor capability within the unit of action and provides the tools for commanders to synchronize their knowledge of combat power with the human dimension of leadership. It is located within the headquarters sections at each echelon of the unit of action down to the company level, and with the integrated command, control, communications, computers, intelligence, surveillance and reconnaissance (C4ISR) suite of equipment, it provides commanders command and control on the move.

The C2Vs contain all the interfaces required to enable the commander to leverage the power of the C4ISR network and provides the means for leaders at all levels to achieve information superiority and situational understanding and to establish, maintain and distribute a common operating picture fused from the friendly, enemy, civilian, weather and terrain situations while on the move. The crew uses its integrated C4ISR suite (communication, computers and sensor systems) to receive, analyze and transmit tactical information via voice, video and data inside and outside the unit of action. The C2V can also employ unmanned systems, such as unmanned aerial vehicles (UAVs) to enhance situational awareness throughout the unit of action.

See also

References

  1. ^ Manned Ground Vehicle overview. Boeing, 7 August 2008.
  2. ^ "Military Budget Reflects a Shift in U.S. Strategy". New York Times, April 7, 2009. Retrieved on April 7, 2009.
  3. ^ Cavallaro, Gina (June 11, 2009). "Panel to discuss new ground combat vehicle". Army Times (Army Times Publishing Company). http://www.armytimes.com/news/2009/06/army_ground_combat_vehicle_061109w/. Retrieved June 14, 2009. 
  4. ^ McLeary, Paul. "U.S. Army Ground Vehicles Up and Down". Aviation Week, 8 May 2009.
  5. ^ Military Deputy for Budget Office of the Assistant Secretary of the Army (Financial Mgt and Comptroller) Lt. Gen. Edgar Stanton and Acting Director, Army Budget Office William Campbell May 07, 2009, News Transcript, U.S. Department of Defense, Office of the Assistant Secretary of Defense (Public Affairs).
  6. ^ http://www.dtic.mil/cgi-bin/GetTRDoc?Location=U2&doc=GetTRDoc.pdf&AD=ADA501037
  7. ^ http://www.strategypage.com/htmw/htart/articles/20070724.aspx
  8. ^ Artillery: M-109 Replacement Enters Production, http://www.strategypage.com/htmw/htart/articles/20070724.aspx 
  9. ^ http://www.army.mil/-news/2008/05/30/9539-first-fcs-manned-vehicle-to-make-public-debut/

 This article incorporates public domain material from websites or documents of the United States Army.

External links


Advertisements






Got something to say? Make a comment.
Your name
Your email address
Message