The Full Wiki

Generation IV reactor: Wikis

Advertisements
  

Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.

Encyclopedia

From Wikipedia, the free encyclopedia

Nuclear Energy Systems Deployable no later than 2030 and offering significant advances in sustainability, safety and reliability, and economics

Generation IV reactors (Gen IV) are a set of theoretical nuclear reactor designs currently being researched. Most of these designs are generally not expected to be available for commercial construction before 2030, with the exception of a version of the Very High Temperature Reactor (VHTR) called the Next Generation Nuclear Plant (NGNP). The NGNP is to be completed by 2021. Current reactors in operation around the world are generally considered second- or third-generation systems, with the first-generation systems having been retired some time ago. Research into these reactor types was officially started by the Generation IV International Forum (GIF) based on eight technology goals. The primary goals being to improve nuclear safety, improve proliferation resistance, minimize waste and natural resource utilization, and to decrease the cost to build and run such plants.

An Integrated Nuclear Energy Model is central to standardized and credible economic evaluation of Generation IV nuclear energy systems. The innovative nuclear systems considered within Generation IV require new tools for their economic assessment, since their characteristics differ significantly from those of current generation II and III nuclear power plants. The current economic models were not designed to compare alternative nuclear technologies or systems but rather to compare nuclear energy with fossil alternatives.

The reactors are intended for use in nuclear power plants to produce nuclear power from nuclear fuel.

Contents

Advantages

Relative to current nuclear power plant technology, the claimed benefits for 4th generation reactors include:[1]

  • Nuclear waste that lasts decades instead of millennia.
  • 100-300 times more energy yield from the same amount of nuclear fuel.
  • The ability to consume existing nuclear waste in the production of electricity.

Reactor types

Many reactor types were considered initially; however, the list was downsized to focus on the most promising technologies and those that could most likely meet the goals of the Gen IV initiative. Three systems are nominally thermal reactors and three fast reactors. The VHTR is also being researched for potentially providing high quality process heat for hydrogen production. The fast reactors offer the possibility of burning actinides to further reduce waste and of being able to breed more fuel than they consume. These systems offer significant advances in sustainability, safety and reliability, economics, proliferation resistance and physical protection.

Advertisements

Thermal reactors

Very-high-temperature reactor (VHTR)

Very-High-Temperature Reactor (VHTR)

The very high temperature reactor concept utilizes a graphite-moderated core with a once-through uranium fuel cycle. This reactor design envisions an outlet temperature of 1,000 °C. The reactor core can be either a prismatic-block or a pebble bed reactor design. The high temperatures enable applications such as process heat or hydrogen production via the thermochemical iodine-sulfur process. It would also be passively safe. The planned construction of the first VHTR, the South African PBMR (pebble bed modular reactor), was given up in February, 2010 after stop of funding by the South African government. Technical problems and a pronounced increase of costs had discouraged potential investors and customers.

Supercritical-water-cooled reactor (SCWR)

Supercritical-Water-Cooled Reactor (SCWR)

The supercritical water reactor (SCWR)[2] is a concept that uses supercritical water as the working fluid. SCWRs are basically light water reactors (LWR) operating at higher pressure and temperatures with a direct, once-through cycle. As most commonly envisioned, it would operate on a direct cycle, much like a Boiling Water Reactor (BWR), but since it uses supercritical water (not to be confused with critical mass) as the working fluid, would have only one phase present, like the Pressurized Water Reactor (PWR). It could operate at much higher temperatures than both current PWRs and BWRs.

Supercritical water-cooled reactors (SCWRs) are promising advanced nuclear systems because of their high thermal efficiency (i.e., about 45% vs. about 33% efficiency for current LWRs) and considerable plant simplification.

The main mission of the SCWR is generation of low-cost electricity. It is built upon two proven technologies, LWRs, which are the most commonly deployed power generating reactors in the world, and supercritical fossil fuel fired boilers, a large number of which are also in use around the world. The SCWR concept is being investigated by 32 organizations in 13 countries.

Molten-salt reactor (MSR)

Molten Salt Reactor (MSR)

A molten salt reactor[2] is a type of nuclear reactor where the coolant is a molten salt. There have been many designs put forward for this type of reactor and a few prototypes built. The early concepts and many current ones had the nuclear fuel dissolved in the molten fluoride salt as uranium tetrafluoride (UF4), the fluid would reach criticality by flowing into a graphite core which would also serve as the moderator. Many current concepts rely on fuel that is dispersed in a graphite matrix with the molten salt providing low pressure, high temperature cooling.

Fast reactors

Gas-cooled fast reactor (GFR)

Gas-Cooled Fast Reactor (GFR)

The gas-cooled fast reactor (GFR)[2] system features a fast-neutron spectrum and closed fuel cycle for efficient conversion of fertile uranium and management of actinides. The reactor is helium-cooled, with an outlet temperature of 850 °C and using a direct Brayton cycle gas turbine for high thermal efficiency. Several fuel forms are being considered for their potential to operate at very high temperatures and to ensure an excellent retention of fission products: composite ceramic fuel, advanced fuel particles, or ceramic clad elements of actinide compounds. Core configurations are being considered based on pin- or plate-based fuel assemblies or prismatic blocks.

Sodium-cooled fast reactor (SFR)

Sodium-Cooled Fast Reactor (SFR)

The SFR[2] is a project that builds on two closely related existing projects, the liquid metal fast breeder reactor and the Integral Fast Reactor.

The goals are to increase the efficiency of uranium usage by breeding plutonium and eliminating the need for transuranic isotopes ever to leave the site. The reactor design uses an unmoderated core running on fast neutrons, designed to allow any transuranic isotope to be consumed (and in some cases used as fuel). In addition to the benefits of removing the long half-life transuranics from the waste cycle, the SFR fuel expands when the reactor overheats, and the chain reaction automatically slows down. In this manner, it is passively safe.

The Integral Fast Reactor or IFR is a design for a nuclear reactor with a specialized nuclear fuel cycle. A prototype of the reactor was built, but the project was cancelled before it could be copied elsewhere.

The SFR reactor concept is cooled by liquid sodium and fueled by a metallic alloy of uranium and plutonium. The fuel is contained in steel cladding with liquid sodium filling in the space between the clad elements which make up the fuel assembly. One of the design challenges of an SFR are the risks of handling Sodium, which reacts explosively if it comes into contact with water. However, the use of liquid metal instead of water as coolant allows the system to work at atmospheric pressure, reducing the risk of leakage.

Lead-cooled fast reactor (LFR)

Lead-Cooled Fast Reactor (LFR)

The lead-cooled fast reactor[2] features a fast-neutron-spectrum lead or lead/bismuth eutectic (LBE) liquid-metal-cooled reactor with a closed fuel cycle. Options include a range of plant ratings, including a "battery" of 50 to 150 MW of electricity that features a very long refueling interval, a modular system rated at 300 to 400 MW, and a large monolithic plant option at 1,200 MW. (The term battery refers to the long-life, factory-fabricated core, not to any provision for electrochemical energy conversion.) The fuel is metal or nitride-based containing fertile uranium and transuranics. The LFR is cooled by natural convection with a reactor outlet coolant temperature of 550 °C, possibly ranging up to 800 °C with advanced materials. The higher temperature enables the production of hydrogen by thermochemical processes.

Participating countries

The nine GIF founding members were joined by Switzerland in 2002, Euratom in 2003 and most recently by China and Russia at the end of 2006.[3]

See also

References

External links


Advertisements






Got something to say? Make a comment.
Your name
Your email address
Message