A globe is a three-dimensional scale model of Earth (terrestrial globe) or other spheroid celestial body such as a planet, star, or moon. It may also refer to a spherical representation of the celestial sphere, showing the apparent positions of the stars and constellations in the sky (celestial globe). The word "globe" comes from the Latin word globus, meaning round mass or sphere.
Contents |
A globe is the only geographical representation that has negligible distortion over large areas, with the exception of the two-dimensional Dymaxion Map; all flat maps are created using a map projection that inevitably introduces an increasing amount of distortion the larger the area that the map shows. A typical scale for a terrestrial globe is roughly 1:40 million.
Sometimes a globe has relief, showing topography; in the case of a globe of the Earth the elevations are exaggerated, otherwise they would be hardly visible. Most modern globes are also imprinted with parallels and meridians so that one can (if only approximately due to scale) tell the coordinates of a specific point on the surface of the planet.
Celestial globes show the apparent positions of the stars in the sky. They omit the Sun, Moon and planets because the positions of these bodies vary relative to those of the stars, but the ecliptic, along which the Sun moves, is indicated.
A potential issue arises regarding the "handedness" of celestial globes. If the globe is constructed so that the stars are in the positions they actually occupy on the imaginary celestial sphere, then the star field will appear back-to-front on the surface of the globe (all the constellations will appear as their mirror images). This is because the view from Earth, positioned at the centre of the celestial sphere, is of the inside of the celestial sphere, whereas the celestial globe is viewed from the outside. For this reason, celestial globes may be produced in mirror image, so that at least the constellations appear the "right way round". Some modern celestial globes address this problem by making the surface of the globe transparent. The stars can then be placed in their proper positions and viewed through the globe, so that the view is of the inside of the celestial sphere, as it is from Earth.
The sphericity of the Earth was established by Hellenistic astronomy in the 3rd century BCE, and the earliest terrestrial globe appeared from that period. The earliest known example is the one constructed by Crates of Mallus in Cilicia (now Çukurova in modern-day Turkey), in the mid-2nd century BCE.[1]
No terrestrial globes from Antiquity or the Middle Ages have survived. An example of a surviving celestial globe is part of a Hellenistic sculpture, called the Farnese Atlas, surviving in a 2nd century AD Roman copy in the Naples Museum, Naples, Italy.[2]
Early terrestrial globes depicting the entirety of the Old World were constructed in the Islamic Golden Age. One such example was constructed in the 9th century by Muslim geographers and cartographers working under the Abbasid caliph, Al-Ma'mun.[3][4] Another example was the terrestrial globe introduced to Beijing by the Persian astronomer, Jamal ad-Din, in 1267.[5]
The oldest surviving terrestrial globe is credited to Martin Behaim in Nürnberg, Germany, in 1492.[2] A facsimile globe showing America was made by Martin Waldseemueller in 1507. Another early globe, the Hunt-Lenox Globe, ca. 1507, is thought to be the source of the phrase "Here be dragons." Another "remarkably modern-looking" terrestrial globe of the Earth was constructed by Taqi al-Din at the Istanbul observatory of Taqi al-Din during the 1570s.[6]
Mass-produced globes are typically covered by a printed paper map. The most common type has long, thin gores (strips) of paper that narrow to a point at the North Pole and the South Pole.[7] Then a small disk is used to paper over the inevitable irregularities at the poles. The more gores there are, the less stretching and crumpling is required to make the paper map fit the sphere. From a geometric point of view, all points on a sphere are equivalent – one could select any arbitrary point on the Earth, and create a paper map that covers the Earth with strips that come together at that point and the antipodal point.
A globe is usually mounted at a 23.5° angle on bearings. In addition to making it easy to use this mounting also represents the angle of the planet in relation to its sun and the spin of the planet. This makes it easy to visualize how days and seasons change.
 Top view of 1765 de l'Isle globe |
 The Unisphere, attributed to "uribe"/Uri Baruchin |
 |
 1594, Mechanised Celestial Globe |
 A globe displayed in the old library of the University of Salamanca. |
 An animated globe (based on images from NASA) |
A globe is a picture of a planet drawn on a sphere. It is like a scale model of the planet. The word "globe" comes from the Latin word globus, meaning round mass or sphere.
Most globes are maps of the Earth. The most common types are political and physical. Political globes show countries. Physical globes show landscape like mountains and rivers.
Global as an adjective is used to mean the entire world rather than any special place. It is also used in fields like computers to mean across an entire hard drive, network, or any other operation.
The fact that the Earth is a sphere was established by Hellenistic astronomy in the 3rd century BCE. The earliest globe of the Earth appeared in that period. The earliest known example is the one made by Crates of Mallus in Cilicia (now Çukurova in modern-day Turkey), in the mid-2nd century BCE.[1]
No globes of the Earth from Antiquity or the Middle Ages have survived. An example of a surviving celestial globe is part of a Hellenistic sculpture, called the Farnese Atlas. It survives in a 2nd century AD Roman copy in the Naples Museum, Naples, Italy.[2]
Early globes of the Earth that show all of the Old World were constructed in the Islamic Golden Age. One such example was made in the 9th century by Muslim geographers and cartographers working under the Abbasid caliph, Al-Ma'mun.[3][4] Another example was the globe introduced to Beijing by the Persian astronomer, Jamal ad-Din, in 1267.[5]
The oldest surviving globe of the Earth is credited to Martin Behaim in Nürnberg, Germany, in 1492.[2] A copy of the globe showing America was made by Martin Waldseemueller in 1507. Another early globe, the Hunt-Lenox Globe, ca. 1507, is thought to be the source of the phrase "Here be dragons." Another "remarkably modern-looking" globe of the Earth was made by Taqi al-Din at the Istanbul observatory of Taqi al-Din during the 1570s.[6]
Mass-produced globes are typically covered by a printed paper map. The most common type has long, thin gores (strips) of paper. These strips narrow to a point at the North Pole and the South Pole.[7] Then a small disk is used to paper over the irregularities at the poles. The more gores there are, the less stretching and crumpling is needed to make the paper map fit the sphere. From a geometric point of view, all points on a sphere are the same. One could select any point on the Earth, and create a paper map that covers the Earth with strips that come together at that point and the antipodal point.
A globe is usually mounted at a 23.5° angle on bearings. This mounting represents the angle of the planet in relation to its sun and the spin of the planet. This makes it easy to visualize how days and seasons change.
   | ppmglobe - generate strips to glue onto a sphere - Ppmglobe User Manual |
| | 3D VRML globe - Universal 3D Globe |
| | Beyer chronometrie clock and watch museum - Beyer Uhren & Juwelen: Ihr exklusives Fachgeschäft für Uhren und Schmuck in Zürich. |
 | Origins of Islamic Intolerence - Origins of Islamic Intolerence by Mark Silverberg |
| | Paper model (net) of a globe - Paper model of a Globe |
| | Martin Waldseemueller 1507 globe - 311 facsimile globe, (Martin Waldseemüller), (1507) |
| | Replogle Globes -- the world's largest globe maker - Replogle Globes - Globes Have Gravity |
|
|
Wikis
Quiz
Facts
Map
Misc
Search
