The Full Wiki

Grizzly APC: Wikis

Advertisements
  
  

Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.

Encyclopedia

From Wikipedia, the free encyclopedia

Grizzly APC
Type Armored personnel carrier
Place of origin  United States
Specifications
Weight <30000lbs
Length 263.75in
Width 102.25in
Height 105.25in
Crew 2+8[1]

Armor AR500 Steel
Primary
armament
Roof ringmount
Engine Diesel
300 HP
Suspension 4×4 or 4x2 wheeled
Operational
range
350 miles
Speed 105 km/h (65 mph)

The Grizzly APC is a 22 ton armored personnel carrier designed and manufactured by Blackwater USA, specifically for urban combat.

Contents

Design

4x2, 4x4, and 6x6 versions with three different Caterpillar diesel engines are available.

Its armor, called the "Blackwater High Threat Armor Protection System" is claimed to defeat .50 caliber rounds as well as IEDs. It is constructed of AR500 steel, and incorporates angled walls and a v-hull chassis to deflect the blast waves produced by explosives. It uses Fiber-Tek armor reinforced belly and lowers, with a fully enclosed drive train.[2] ArmorThane tactical coating on the interior and exterior reduces spall probability.

There are two top-side egress hatches, five gun ports (two on each side and one in rear), and transparent armored windows, capable of NIJ level 3 protection. The Grizzly makes use of forward and rear 400,000+ candle power halogen searchlights, which can be operated remotely. It also has a ringmount roof turret, capable of mounting a 12.7mm machine gun, which may be operated from a remote weapon station.

Blackwater USA submitted two Grizzly APC vehicles to the U.S. Military, with EXO Scale anti-EFP appliqué armor from ARES Systems Group, for the MRAP II competition at the Aberdeen Proving Ground.[3] According to the Army Times, the armor passed the testing, but the vehicle failed due to limited armor on the forward area of the vehicle (pictures on ARES' website shows less armor was used over the frontal area of the cab.) Blackwater had been hoping to discuss adding more armor to the forward area and threatened an automatic protest but were basically told "Go ahead and protest. We’re canceling the program anyway," according an Army Times source.[4]

Production

The Grizzly is manufactured by Blackwater Armored Vehicle, a division of Xe (formerly known as Blackwater Worldwide), in a recently-built 70,000 square foot factory in Camden, North Carolina.[5] It was scheduled to begin production in April 2007 and Blackwater predicted production of at least a vehicle a day to meet demand. However, the Grizzly was not selected by the US Army in 2008 and lack of projected non-US-military sales have forced cutbacks in staff at the plant.

The first Grizzly was built on a commercial GMC chassis. The current versions are built on a custom chassis supplied by Seagrave Fire Apparatus, Clintonville WI. File:Images-5.jpg

Notes

See also

References

External links

Advertisements

Grizzly APC
Type Armored personnel carrier
Place of origin  United States
Specifications
Weight <30000lbs
Length 263.75in
Width 102.25in
Height 105.25in
Crew 2+8[1]

Armor AR500 Steel
Primary
armament
Roof ringmount
Engine Diesel
300 HP
Suspension 4×4 or 4x2 wheeled
Operational
range
350 miles
Speed 105 km/h (65 mph)

The Grizzly APC is a 22 ton armored personnel carrier designed and manufactured by Blackwater USA, specifically for urban combat.

Contents

Design

4x2, 4x4, and 6x6 versions with three different Caterpillar diesel engines are available.

Its armor, called the "Blackwater High Threat Armor Protection System" is claimed to defeat .50 caliber rounds as well as IEDs. It is constructed of AR500 steel, and incorporates angled walls and a v-hull chassis to deflect the blast waves produced by explosives. It uses Fiber-Tek armor reinforced belly and lowers, with a fully enclosed drive train.[2] ArmorThane tactical coating on the interior and exterior reduces spall probability.

There are two top-side egress hatches, five gun ports (two on each side and one in rear), and transparent armored windows, capable of NIJ level 3 protection. The Grizzly makes use of forward and rear 400,000+ candle power halogen searchlights, which can be operated remotely. It also has a ringmount roof turret, capable of mounting a 12.7mm machine gun, which may be operated from a remote weapon station.

Blackwater USA submitted two Grizzly APC vehicles to the U.S. Military, with EXO Scale anti-EFP appliqué armor from ARES Systems Group, for the MRAP II competition at the Aberdeen Proving Ground.[3] According to the Army Times, the armor passed the testing, but the vehicle failed due to limited armor on the forward area of the vehicle (pictures on ARES' website shows less armor was used over the frontal area of the cab.) Blackwater had been hoping to discuss adding more armor to the forward area and threatened an automatic protest but it was disregarded, according to an Army Times source.[4]

Production

The Grizzly is manufactured by Blackwater Armored Vehicle, a division of Xe (formerly known as Blackwater Worldwide), in a recently-built 70,000-square-foot (6,500 m2) factory in Camden, North Carolina.[5] It was scheduled to begin production in April 2007 and Blackwater predicted production of at least a vehicle a day to meet demand. However, the Grizzly was not selected by the US Army in 2008 and lack of projected non-US-military sales have forced cutbacks in staff at the plant.

The first Grizzly was built on a commercial GMC chassis. The current versions are built on a custom chassis supplied by Seagrave Fire Apparatus, Clintonville WI.

Notes

See also

References

External links


Advertisements






Got something to say? Make a comment.
Your name
Your email address
Message