Hydrate: Wikis


Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.


From Wikipedia, the free encyclopedia

Hydrate is a term used in inorganic chemistry and organic chemistry to indicate that a substance contains water. The chemical state of the water varies widely between hydrates, some of which were so labeled before their chemical structure was understood.


Chemical nature of hydrates


Organic chemistry

In organic chemistry, a hydrate is a compound formed by the addition of water or its elements to another molecule. For example, ethanol, CH3–CH2–OH, can be considered as a hydrate of ethylene, CH2=CH2, formed by the addition of H to one C and OH to the other C. A molecule of water may be eliminated, for example by the action of sulfuric acid. Another example is chloral hydrate, CCl3–CH(OH)2, which can be formed by reaction of water with chloral, CCl3–CH=O.

Molecules have been labeled as hydrates for historical reasons. Glucose, C6H12O6, was originally thought of as C6(H2O)6 and described as a carbohydrate, but this is a very poor description of its structure as known today. And methanol is often sold as “methyl hydrate”, implying an incorrect formula CH3OH2, although the correct formula is CH3–OH.

Inorganic chemistry

Hydrates are inorganic salts "containing water molecules combined in a definite ratio as an integral part of the crystal"[1] that are either bound to a metal center or that have crystallized with the metal complex. Such hydrates are also said to contain water of crystallization or water of hydration. If the water is heavy water, where the hydrogen involved is the isotope deuterium, then the term deuterate may be used in place of hydrate.

Anhydrous Cobalt(II) chloride CoCl2
Cobalt(II) chloride hexahydrate Co(H2O)6Cl2

A colorful example is cobalt(II) chloride, which turns from blue to magenta (red) upon hydration, and can therefore be used as a water indicator.

The notation of hydrous compound · nH2O, where n is the number of water molecules per molecule of salt, is commonly used to show that a salt is hydrated. The n is usually a low integer, though it is possible for fractional values to exist. In a monohydrate n is one, in a hexahydrate n is 6 etc. Such water is also referred to as water of crystallization. Examples include borax decahydrate and chalcanthite.

Gas hydrates are clathrate hydrates (a class of solid hydrates of gases): water ice with gas molecules trapped within. When the gas is methane it is called a methane hydrate.

A hydrate which has lost water is referred to as an anhydride, and can normally lose further water only upon strong heating, if at all. A substance that does not contain any water is referred to as anhydrous.


The stability of hydrates is generally determined by the nature of the compounds, their temperature, and the relative humidity(if they are exposed to air).

Applications of hydrates


Generally, in construction and refractories, inorganic binders are often deprived of water during manufacture. For instance, both in cement and gypsum products, heat is applied to the raw materials. Once water is added on a construction site, the powder is re-hydrated and able to form bonds with other substances that are present. Thus, one goes from powder, to slurry, or paste and then forms "cement stone". Water that is not chemically bound, or converted into hydrates, can come off again as steam, especially due to the heat of hydration, with cement products in particular, which undergo an exothermic chemical reaction with water.

Generally, the longer one can keep cementitious products wet immediately after placement, the better. The wetter cementitious products are kept, the more water will be converted into hydrates, instead of evaporating off due to the heat of hydration and other environmental influences. Premature drying is a cause for severe concrete problems, such as cracking and shrinking.

Passive fire protection (PFP)

Avoiding premature drying is important to all other cementitious building products, particularly spray fireproofing and firestop mortars, where the slightest cracking can lead to rejection. The chemically bound water is used up by endothermic reactions when exposed to the heat of a fire. Fire temperatures in a building can reach 1100°C, depending on the fuel present and the availability of oxygen, but the hydrates keep the temperature of the item near 100 °C until all the water is spent. Therefore, the more hydrates, the longer the fire-resistance duration. This is what lends fire-resistive characteristics to basic, or "old" building materials, like gypsum, concrete or plaster.

Fire-resistance duration is important to many high-tech PFP products such as intumescent and endothermic paints, wraps and tiles, such as those used in space physics for re-entry vehicles.

See also


  1. ^ "Hydrate". Farlex, Inc (TheFreeDictionary.com. http://www.thefreedictionary.com/hydrate. Retrieved 2009-07-08.  

1911 encyclopedia

Up to date as of January 14, 2010
(Redirected to Database error article)

From LoveToKnow 1911

(There is currently no text in this page)


Up to date as of January 15, 2010

Definition from Wiktionary, a free dictionary

See also hydrate




  1. Plural form of Hydrat.


Got something to say? Make a comment.
Your name
Your email address