# Inertial frame of reference: Wikis

Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.

# Encyclopedia

In physics, an inertial frame of reference (also inertial reference frame or inertial frame ) is a frame of reference which describes time homogeneously and space homogeneously, isotropically, and in a time independent manner. This allows motion and interactions to be described without the presence of fictitious forces.[1][2] Special relativity states that there are actually infinitely many such frames, and the physical laws takes the same form as they do in any other inertial frame of the same handedness.[3][4] In flat spacetimes, all inertial frames are in a state of constant, uniform motion with respect to one another.

By contrast, in non-inertial reference frames, the laws of physics are dependent upon the particular frame of reference, and the usual physical forces must be supplemented by what are called fictitious forces. All non-inertial frames are accelerating with respect to all inertial frames.

## Introduction

In an inertial frame, Newton's second law for a particle takes the form:

$\mathbf{F} = m \mathbf{a} \ ,$

with F the net force (a vector), m the mass of a particle and a the acceleration of the particle (also a vector) which would be measured by an observer at rest in the frame. The force F is the vector sum of all "real" forces on the particle, such as electromagnetic, gravitational, nuclear and so forth. In contrast, Newton's second law in a rotating frame of reference, rotating at angular rate Ω about an axis, takes the form:

$\mathbf{F}' = m \mathbf{a} \ ,$

which looks the same as in an inertial frame, but now the force F′ is the resultant of not only F, but also additional terms (the paragraph following this equation presents the main points without detailed mathematics):

$\mathbf{F}' = \mathbf{F} - 2m \mathbf{\Omega} \times \mathbf{v}_{B} - m \mathbf{\Omega} \times (\mathbf{\Omega} \times \mathbf{x}_B ) - m \frac{d \mathbf{\Omega}}{dt} \times \mathbf{x}_B \ ,$

where the angular rotation of the frame is expressed by the vector Ω pointing in the direction of the axis of rotation, and with magnitude equal to the angular rate of rotation Ω, symbol × denotes the vector cross product, vector xB locates the body and vector vB is the velocity of the body according to a rotating observer (different from the velocity seen by the inertial observer).

The extra terms in the force F′ are the "fictitious" forces for this frame. (The first extra term is the Coriolis force, the second the centrifugal force, and the third the Euler force.) These terms all have these properties: they vanish when Ω = 0; that is, they are zero for an inertial frame (which, of course, does not rotate); they take on a different magnitude and direction in every rotating frame, depending upon its particular value of Ω; they are ubiquitous in the rotating frame (affect every particle, regardless of circumstance); and they have no apparent source in identifiable physical sources, in particular, matter. Also, fictitious forces do not drop off with distance (unlike, for example, nuclear forces or electrical forces). For example, the centrifugal force that appears to emanate from the axis of rotation in a rotating frame increases with distance from the axis.

All observers agree on the real forces, F; only non-inertial observers need fictitious forces. The laws of physics in the inertial frame are simpler because unnecessary forces are not present.

In Newton's time the fixed stars were invoked as a reference frame, supposedly at rest relative to absolute space. In reference frames that were either at rest with respect to the fixed stars or in uniform translation relative to these stars, Newton's laws of motion were supposed to hold. In contrast, in frames accelerating with respect to the fixed stars, an important case being frames rotating relative to the fixed stars, the laws of motion did not hold in their simplest form, but had to be supplemented by the addition of fictitious forces, for example, the Coriolis force and the centrifugal force. Two interesting experiments were devised by Newton to demonstrate how these forces could be discovered, thereby revealing to an observer that they were not in an inertial frame: the example of the tension in the cord linking two spheres rotating about their center of gravity, and the example of the curvature of the surface of water in a rotating bucket. In both cases, application of Newton's second law would not work for the rotating observer without invoking centrifugal and Coriolis forces to account for their observations (tension in the case of the spheres; parabolic water surface in the case of the rotating bucket).

As we now know, the fixed stars are not fixed. Those that reside in the Milky Way turn with the galaxy, exhibiting proper motions. Those that are outside our galaxy (such as nebulae once mistaken to be stars) participate in their own motion as well, partly due to expansion of the universe, and partly due to peculiar velocities.[5] (The Andromeda galaxy is on collision course with the Milky Way at a speed of 117 km/s.[6]) The concept of inertial frames of reference is no longer tied to either the fixed stars or to absolute space. Rather, the identification of an inertial frame is based upon the simplicity of the laws of physics in the frame. In particular, the absence of fictitious forces is their identifying property.[7]

In practice, although not a requirement, using a frame of reference based upon the fixed stars as though it were an inertial frame of reference introduces very little discrepancy. For example, the centrifugal acceleration of the Earth because of its rotation about the Sun is about thirty million times greater than that of the Sun about the galactic center.[8]

To illustrate further, consider the question: "Does our Universe rotate?" To answer, we might attempt to explain the shape of the Milky Way galaxy using the laws of physics.[9] (Other observations might be more definitive (that is, provide larger discrepancies or less measurement uncertainty), like the anisotropy of the microwave background radiation or Big Bang nucleosynthesis.[10][11]) Just how flat the disc of the Milky Way is depends on its rate of rotation in a inertial frame of reference. If we attribute its apparent rate of rotation entirely to rotation in an inertial frame, a different "flatness" is predicted than if we suppose part of this rotation actually is due to rotation of the Universe and should not be included in the rotation of the galaxy itself. Based upon the laws of physics, a model is set up in which one parameter is the rate of rotation of the Universe. If the laws of physics agree more accurately with observations in a model with rotation than without it, we are inclined to select the best-fit value for rotation, subject to all other pertinent experimental observations. If no value of the rotation parameter is successful and theory is not within observational error, a modification of physical law is considered. (For example, dark matter is invoked to explain the galactic rotation curve.) So far, observations show any rotation of the Universe is very slow (no faster than once every 60,000 billion years (10−13 rad/yr)[12]), and debate persists over whether there is any rotation. However, if rotation were found, interpretation of observations in a frame tied to the Universe would have to be corrected for the fictitious forces inherent in such rotation. Evidently, such an approach adopts the view that "an inertial frame of reference is one where our laws of physics apply" (or need the least modification).

## Background

A brief comparison of inertial frames in special relativity and in Newtonian mechanics, and the role of absolute space is next.

### A set of frames where the laws of physics are simple

According to the first postulate of special relativity, all physical laws take their simplest form in an inertial frame, and there exist multiple inertial frames interrelated by uniform translation: [13]

 “ Special principle of relativity: If a system of coordinates K is chosen so that, in relation to it, physical laws hold good in their simplest form, the same laws hold good in relation to any other system of coordinates K' moving in uniform translation relatively to K. ”

The principle of simplicity can be used within Newtonian physics as well as in special relativity; see Nagel[14] and also Blagojević.[15]

 “ The laws of Newtonian mechanics do not always hold in their simplest form...If, for instance, an observer is placed on a disc rotating relative to the earth, he/she will sense a 'force' pushing him/her toward the periphery of the disc, which is not caused by any interaction with other bodies. Here, the acceleration is not the consequence of the usual force, but of the so-called inertial force. Newton's laws hold in their simplest form only in a family of reference frames, called inertial frames. This fact represents the essence of the Galilean principle of relativity:    The laws of mechanics have the same form in all inertial frames. ”

In practical terms, the equivalence of inertial reference frames means that scientists within a box moving uniformly cannot determine their absolute velocity by any experiment (otherwise the differences would set up an absolute standard reference frame).[16][17] According to this definition, supplemented with the constancy of the speed of light, inertial frames of reference transform among themselves according to the Poincaré group of symmetry transformations, of which the Lorentz transformations are a subgroup.[18] In Newtonian mechanics, which can be viewed as a limiting case of special relativity in which the speed of light is infinite, inertial frames of reference are related by the Galilean group of symmetries.

### Absolute space

Newton posited an absolute space considered well approximated by a frame of reference stationary relative to the fixed stars. An inertial frame was then one in uniform translation relative to absolute space. However, some scientists (called "relativists" by Mach[19]), even at the time of Newton, felt that absolute space was a defect of the formulation, and should be replaced.

Indeed, the expression inertial frame of reference (German: Inertialsystem) was coined by Ludwig Lange in 1885, to replace Newton's definitions of "absolute space and time" by a more operational definition.[20][21] As referenced by Iro, Lange proposed:[22]

 “ A reference frame in which a mass point thrown from the same point in three different (non co-planar) directions follows rectilinear paths each time it is thrown, is called an inertial frame. ”

A discussion of Lange's proposal can be found in Mach.[19]

The inadequacy of the notion of "absolute space" in Newtonian mechanics is spelled out by Blagojević:[23]

 “ The existence of absolute space contradicts the internal logic of classical mechanics since, according to Galilean principle of relativity, none of the inertial frames can be singled out. Absolute space does not explain inertial forces since they are related to acceleration with respect to any one of the inertial frames. Absolute space acts on physical objects by inducing their resistance to acceleration but it cannot be acted upon. ”

The utility of operational definitions was carried much further in the special theory of relativity.[24] Some historical background including Lange's definition is provided by DiSalle, who says in summary:[25]

 “ The original question, “relative to what frame of reference do the laws of motion hold?” is revealed to be wrongly posed. For the laws of motion essentially determine a class of reference frames, and (in principle) a procedure for constructing them. ”

## Newton's inertial frame of reference

Figure 1: Two frames of reference moving with relative velocity $\stackrel{\vec v}{}$. Frame S' has an arbitrary but fixed rotation with respect to frame S. They are both inertial frames provided a body not subject to forces appears to move in a straight line. If that motion is seen in one frame, it will also appear that way in the other.

Within the realm of Newtonian mechanics, an inertial frame of reference, or inertial reference frame, is one in which Newton's first law of motion is valid.[26] However, the principle of special relativity generalizes the notion of inertial frame to include all physical laws, not simply Newton's first law.

Newton viewed the first law as valid in any reference frame that is in uniform motion relative to the fixed stars;[27] that is, neither rotating nor accelerating relative to the stars.[28] Today the notion of "absolute space" is abandoned, and an inertial frame in the field of classical mechanics is defined as:[29][30]

 “ An inertial frame of reference is one in which the motion of a particle not subject to forces is in a straight line at constant speed. ”

Hence, with respect to an inertial frame, an object or body accelerates only when a physical force is applied, and (following Newton's first law of motion), in the absence of a net force, a body at rest will remain at rest and a body in motion will continue to move uniformly—that is, in a straight line and at constant speed. Newtonian inertial frames transform among each other according to the Galilean group of symmetries.

If this rule is interpreted as saying that straight-line motion is an indication of zero net force, the rule does not identify inertial reference frames, because straight-line motion can be observed in a variety of frames. If the rule is interpreted as defining an inertial frame, then we have to be able to determine when zero net force is applied. The problem was summarized by Einstein:[31]

 “ The weakness of the principle of inertia lies in this, that it involves an argument in a circle: a mass moves without acceleration if it is sufficiently far from other bodies; we know that it is sufficiently far from other bodies only by the fact that it moves without acceleration. ”

There are several approaches to this issue. One approach is to argue that all real forces drop off with distance from their sources in a known manner, so we have only to be sure that we are far enough away from all sources to ensure that no force is present.[32] A possible issue with this approach is the historically long-lived view that the distant universe might affect matters (Mach's principle). Another approach is to identify all real sources for real forces and account for them. A possible issue with this approach is that we might miss something, or account inappropriately for their influence (Mach's principle again?). A third approach is to look at the way the forces transform when we shift reference frames. Fictitious forces, those that arise due to the acceleration of a frame, disappear in inertial frames, and have complicated rules of transformation in general cases. On the basis of universality of physical law and the request for frames where the laws are most simply expressed, inertial frames are distinguished by the absence of such fictitious forces.

Newton enunciated a principle of relativity himself in one of his corollaries to the laws of motion:[33][34]

 “ The motions of bodies included in a given space are the same among themselves, whether that space is at rest or moves uniformly forward in a straight line. ”

This principle differs from the special principle in two ways: first, it is restricted to mechanics, and second, it makes no mention of simplicity. It shares with the special principle the invariance of the form of the description among mutually translating reference frames.[35] The role of fictitious forces in classifying reference frames is pursued further below.

## Separating non-inertial from inertial reference frames

Figure 2: Two spheres tied with a string and rotating at an angular rate ω. Because of the rotation, the string tying the spheres together is under tension.
Figure 3: Exploded view of rotating spheres in an inertial frame of reference showing the centripetal forces on the spheres provided by the tension in the tying string.

Inertial and non-inertial reference frames can be distinguished by the absence or presence of fictitious forces, as explained shortly.[1][2]

 “ The effect of his being in the noninertial frame is to require the observer to introduce a fictitious force into his calculations…. ”

The presence of fictitious forces indicates the physical laws are not the simplest laws available so, in terms of the special principle of relativity, a frame where fictitious forces are present is not an inertial frame:[36]

 “ The equations of motion in a non-inertial system differ from the equations in an inertial system by additional terms called inertial forces. This allows us to detect experimentally the non-inertial nature of a system. ”

Bodies in non-inertial reference frames are subject to so-called fictitious forces (pseudo-forces); that is, forces that result from the acceleration of the reference frame itself and not from any physical force acting on the body. Examples of fictitious forces are the centrifugal force and the Coriolis force in rotating reference frames.

How then, are "fictitious' forces to be separated from "real" forces? It is hard to apply the Newtonian definition of an inertial frame without this separation. For example, consider a stationary object in an inertial frame. Being at rest, no net force is applied. But in a frame rotating about a fixed axis, the object appears to move in a circle, and is subject to centripetal force (which is made up of the Coriolis force and the centrifugal force). How can we decide that the rotating frame is a non-inertial frame? There are two approaches to this resolution: one approach is to look for the origin of the fictitious forces (the Coriolis force and the centrifugal force). We will find there are no sources for these forces, no associated force carriers, no originating bodies.[37] A second approach is to look at a variety of frames of reference. For any inertial frame, the Coriolis force and the centrifugal force disappear, so application of the principle of special relativity would identify these frames where the forces disappear as sharing the same and the simplest physical laws, and hence rule that the rotating frame is not an inertial frame.

Newton examined this problem himself using rotating spheres, as shown in Figure 2 and Figure 3. He pointed out that if the spheres are not rotating, the tension in the tying string is measured as zero in every frame of reference.[38] If the spheres only appear to rotate (that is, we are watching stationary spheres from a rotating frame), the zero tension in the string is accounted for by observing that the centripetal force is supplied by the centrifugal and Coriolis forces in combination, so no tension is needed. If the spheres really are rotating, the tension observed is exactly the centripetal force required by the circular motion. Thus, measurement of the tension in the string identifies the inertial frame: it is the one where the tension in the string provides exactly the centripetal force demanded by the motion as it is observed in that frame, and not a different value. That is, the inertial frame is the one where the fictitious forces vanish. (See Rotating spheres for original text and mathematical formulation.)

So much for fictitious forces due to rotation. However, for linear acceleration, Newton expressed the idea of undetectability of straight-line accelerations held in common:[34]

 “ If bodies, any how moved among themselves, are urged in the direction of parallel lines by equal accelerative forces, they will continue to move among themselves, after the same manner as if they had been urged by no such forces. ”

This principle generalizes the notion of an inertial frame. For example, an observer confined in a free-falling lift will assert that he himself is a valid inertial frame, even if he is accelerating under gravity, so long as he has no knowledge about anything outside the lift. So, strictly speaking, inertial frame is a relative concept. With this in mind, we can define inertial frames collectively as a set of frames which are stationary or moving at constant velocity with respect to each other, so that a single inertial frame is defined as an element of this set.

For these ideas to apply, everything observed in the frame has to be subject to a base-line, common acceleration shared by the frame itself. That situation would apply, for example, to the elevator example, where all objects are subject to the same gravitational acceleration, and the elevator itself accelerates at the same rate.

## Newtonian mechanics

Classical mechanics, which includes relativity, assumes the equivalence of all inertial reference frames. Newtonian mechanics makes the additional assumptions of absolute space and absolute time. Given these two assumptions, the coordinates of the same event (a point in space and time) described in two inertial reference frames are related by a Galilean transformation

$\mathbf{r}^{\prime} = \mathbf{r} - \mathbf{r}_{0} - \mathbf{v} t$
$t^{\prime} = t - t_{0}$

where r0 and t0 represent shifts in the origin of space and time, and v is the relative velocity of the two inertial reference frames. Under Galilean transformations, the time t2t1 between two events is the same for all inertial reference frames and the distance between two simultaneous events (or, equivalently, the length of any object, |r2r1|) is also the same.

## Special relativity

Einstein's theory of special relativity, like Newtonian mechanics, assumes the equivalence of all inertial reference frames, but makes an additional assumption, foreign to Newtonian mechanics, namely, that in free space light always is propagated with the speed of light c0, a defined value independent of its direction of propagation and its frequency, and also independent of the state of motion of the emitting body. This second assumption has been verified experimentally and leads to counter-intuitive deductions including:

These deductions are logical consequences of the stated assumptions, and are general properties of space-time, typically without regard to a consideration of properties pertaining to the structure of individual objects like atoms or stars, nor to the mechanisms of clocks.

These effects are expressed mathematically by the Lorentz transformation

$x^{\prime} = \gamma \left(x - v t \right)$
$y^{\prime} = y$
$z^{\prime} = z$
$t^{\prime} = \gamma \left(t - \frac{v x}{c_0^{2}}\right)$

where shifts in origin have been ignored, the relative velocity is assumed to be in the x-direction and the Lorentz factor γ is defined by:

$\gamma \ \stackrel{\mathrm{def}}{=}\ \frac{1}{\sqrt{1 - (v/c_0)^2}} \ \ge 1.$

The Lorentz transformation is equivalent to the Galilean transformation in the limit c0 → ∞ (a hypothetical case) or v → 0 (low speeds).

Under Lorentz transformations, the time and distance between events may differ among inertial reference frames; however, the Lorentz scalar distance s2 between two events is the same in all inertial reference frames

$s^{2} = \left( x_{2} - x_{1} \right)^{2} + \left( y_{2} - y_{1} \right)^{2} + \left( z_{2} - z_{1} \right)^{2} - c_0^{2} \left(t_{2} - t_{1}\right)^{2}$

From this perspective, the speed of light is only accidentally a property of light, and is rather a property of spacetime, a conversion factor between conventional time units (such as seconds) and length units (such as meters).

Incidentally, because of the limitations on speeds faster than the speed of light, notice that a rotating frame of reference (which is a non-inertial frame, of course) cannot be used out to arbitrary distances because at large radius its components would move faster than the speed of light. See Landau and Lifshitz.[39]

## General relativity

General relativity is based upon the principle of equivalence:[40][41]

There is no experiment observers can perform to distinguish whether an acceleration arises because of a gravitational force or because their reference frame is accelerating.
Douglas C. Giancoli, Physics for Scientists and Engineers with Modern Physics, p. 155.

This idea was introduced in Einstein's 1907 article "Principle of Relativity and Gravitation" and later developed in 1911.[42] Support for this principle is found in the Eötvös experiment, which determines whether the ratio of inertial to gravitational mass is the same for all bodies, regardless of size or composition. To date no difference has been found to a few parts in 1011.[43] For some discussion of the subtleties of the Eötvös experiment, such as the local mass distribution around the experimental site (including a quip about the mass of Eötvös himself), see Franklin.[44]

Einstein’s general theory modifies the distinction between nominally "inertial" and "noninertial" effects by replacing special relativity's "flat" Euclidean geometry with a curved non-Euclidean metric. In general relativity, the principle of inertia is replaced with the principle of geodesic motion, whereby objects move in a way dictated by the curvature of spacetime. As a consequence of this curvature, it is not a given in general relativity that inertial objects moving at a particular rate with respect to each other will continue to do so. This phenomenon of geodesic deviation means that inertial frames of reference do not exist globally as they do in Newtonian mechanics and special relativity.

However, the general theory reduces to the special theory over sufficiently small regions of spacetime, where curvature effects become less important and the earlier inertial frame arguments can come back into play. Consequently, modern special relativity is now sometimes described as only a “local theory”. (However, this refers to the theory’s application rather than to its derivation.)

 Lorentz invariance Newton's first law Rotating spheres

## References

1. ^ a b Milton A. Rothman (1989). Discovering the Natural Laws: The Experimental Basis of Physics. Courier Dover Publications. p. 23. ISBN 0486261786.
2. ^ a b Sidney Borowitz & Lawrence A. Bornstein (1968). A Contemporary View of Elementary Physics. McGraw-Hill. p. 138.
3. ^ Albert Einstein (2001) [Reprint of edition of 1920 translated by RQ Lawson]. Relativity: The Special and General Theory (3rd ed.). Courier Dover Publications. p. 71. ISBN 048641714X.
4. ^ Domenico Giulini (2005). Special Relativity. Cambridge University Press. p. 19. ISBN 0198567464.
5. ^ Amedeo Balbi (2008). The Music of the Big Bang. Springer. p. 59. ISBN 3540787267.
6. ^ Abraham Loeb, Mark J. Reid, Andreas Brunthaler, Heino Falcke (2005). "Constraints on the proper motion of the Andromeda galaxy based on the survival of its satellite M33". The Astrophysical Journal 633: 894–898. doi:10.1086/491644.
7. ^ John J. Stachel (2002). Einstein from "B" to "Z". Springer. pp. 235–236. ISBN 0817641432.
8. ^ Peter Graneau & Neal Graneau (2006). In the Grip of the Distant Universe. World Scientific. p. 147. ISBN 9812567542.
9. ^ Henning Genz (2001). Nothingness. Da Capo Press. p. 275. ISBN 0738206105.
10. ^ J Garcio-Bellido (2005). "The Paradigm of Inflation". in J. M. T. Thompson. Advances in Astronomy. Imperial College Press. p. 32, §9. ISBN 1860945775.
11. ^ Wlodzimierz Godlowski and Marek Szydlowski (2003). "Dark energy and global rotation of the Universe". General Relativity and Gravitation 35: 2171. doi:10.1023/A:1027301723533.
12. ^ P Birch Is the Universe rotating? Nature 298, 451 - 454 (29 July 1982)
13. ^ Einstein, A., Lorentz, H. A., Minkowski, H., & Weyl, H. (1952). The Principle of Relativity: a collection of original memoirs on the special and general theory of relativity. Courier Dover Publications. p. 111. ISBN 0486600815.
14. ^ Ernest Nagel (1979). The Structure of Science. Hackett Publishing. p. 212. ISBN 0915144719.
15. ^ Milutin Blagojević (2002). Gravitation and Gauge Symmetries. CRC Press. p. 4. ISBN 0750307676.
16. ^ Albert Einstein (1920). Relativity: The Special and General Theory. H. Holt and Company. p. 17.
17. ^ Richard Phillips Feynman (1998). Six not-so-easy pieces: Einstein's relativity, symmetry, and space-time. Basic Books. p. 73. ISBN 0201328429.
18. ^ Armin Wachter & Henning Hoeber (2006). Compendium of Theoretical Physics. Birkhäuser. p. 98. ISBN 0387257993.
19. ^ a b Ernst Mach (1915). The Science of Mechanics. The Open Court Publishing Co.. p. 38.
20. ^ Lange, Ludwig (1885). "Über die wissenschaftliche Fassung des Galileischen Beharrungsgesetzes". Philosophische Studien 2.
21. ^ Julian B. Barbour (2001). The Discovery of Dynamics (Reprint of 1989 Absolute or Relative Motion? ed.). Oxford University Press. pp. 645–646. ISBN 0195132025.
22. ^ L. Lange (1885) as quoted by Max von Laue in his book (1921) Die Relativitätstheorie, p. 34, and translated by Harald Iro (2002). A Modern Approach to Classical Mechanics. World Scientific. p. 169. ISBN 9812382135.
23. ^ Milutin Blagojević (2002). Gravitation and Gauge Symmetries. CRC Press. p. 5. ISBN 0750307676.
24. ^ NMJ Woodhouse (2003). Special relativity. London: Springer. p. 58. ISBN 1-85233-426-6.
25. ^ Robert DiSalle (Summer 2002). "Space and Time: Inertial Frames". in Edward N. Zalta. The Stanford Encyclopedia of Philosophy.
26. ^ C Møller (1976). The Theory of Relativity (Second ed.). Oxford UK: Oxford University Press. p. 1. ISBN 019560539X.
27. ^ The question of "moving uniformly relative to what?" was answered by Newton as "relative to absolute space". As a practical matter, "absolute space" was considered to be the fixed stars. For a discussion of the role of fixed stars, see Henning Genz (2001). Nothingness: The Science of Empty Space. Da Capo Press. p. 150. ISBN 0738206105.
28. ^ Robert Resnick, David Halliday, Kenneth S. Krane (2001). Physics (5th ed.). Wiley. Volume 1, Chapter 3. ISBN 0471320579.
29. ^ RG Takwale (1980). Introduction to classical mechanics. New Delhi: Tata McGraw-Hill. p. 70. ISBN 0070966176.
30. ^ NMJ Woodhouse (2003). Special relativity. London/Berlin: Springer. p. 6. ISBN 1-85233-426-6.
31. ^
32. ^ William Geraint Vaughan Rosser (1991). Introductory Special Relativity. CRC Press. p. 3. ISBN 0850668387.
33. ^ Richard Phillips Feynman (1998). Six not-so-easy pieces: Einstein's relativity, symmetry, and space-time. Basic Books. p. 50. ISBN 0201328429.
34. ^ a b See the Principia on line at Andrew Motte Translation
35. ^ However, in the Newtonian system the Galilean transformation connects these frames and in the special theory of relativity the Lorentz transformation connects them. The two transformations agree for speeds of translation much less than the speed of light.
36. ^
37. ^ For example, there is no body providing a gravitational or electrical attraction.
38. ^ That is, the universality of the laws of physics requires the same tension to be seen by everybody. For example, it cannot happen that the string breaks under extreme tension in one frame of reference and remains intact in another frame of reference, just because we choose to look at the string from a different frame.
39. ^ LD Landau & LM Lifshitz (1975). The Classical Theory of Fields (4rth Revised English ed.). Pergamon Press. pp. 273–274. ISBN 978-0-7506-2768-9.
40. ^ David Morin (2008). Introduction to Classical Mechanics. Cambridge University Press. p. 649. ISBN 0521876222.
41. ^ Douglas C. Giancoli (2007). Physics for Scientists and Engineers with Modern Physics. Pearson Prentice Hall. p. 155. ISBN 0131495089.
42. ^ A. Einstein, "On the influence of gravitation on the propagation of light", Annalen der Physik, vol. 35, (1911) : 898-908
43. ^ National Research Council (US) (1986). Physics Through the Nineteen Nineties: Overview. National Academies Press. p. 15. ISBN 0309035791.
44. ^ Allan Franklin (2007). No Easy Answers: Science and the Pursuit of Knowledge. University of Pittsburgh Press. p. 66. ISBN 0822959682.

Rotation of the Universe
• Julian B. Barbour, Herbert Pfister (1998). Mach's Principle: From Newton's Bucket to Quantum Gravity. Birkhäuser. p. 445. ISBN 0817638237.
• PJ Nahin (1999). Time Machines. Springer. p. 369; Footnote 12. ISBN 0387985719.
• B Ciobanu, I Radinchi Modeling the electric and magnetic fields in a rotating universe Rom. Journ. Phys., Vol. 53, Nos. 1–2, P. 405–415, Bucharest, 2008
• Yuri N. Obukhov, Thoralf Chrobok, Mike Scherfner Shear-free rotating inflation Phys. Rev. D 66, 043518 (2002) [5 pages]
• Yuri N. Obukhov On physical foundations and observational effects of cosmic rotation (2000)
• Li-Xin Li Effect of the Global Rotation of the Universe on the Formation of Galaxies General Relativity and Gravitation, 30 (1998) doi: 10.1023/A:1018867011142
• P Birch Is the Universe rotating? Nature 298, 451 - 454 (29 July 1982)
• Kurt Gödel An example of a new type of cosmological solutions of Einstein’s field equations of gravitation Rev. Mod. Phys., Vol. 21, p. 447, 1949.