Inline-four engine: Wikis

  
  

Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.

Encyclopedia

From Wikipedia, the free encyclopedia

Ford inline-four engine with cylinder head removed

The inline-four engine or straight-four engine is a four-cylinder internal combustion engine with all four cylinders mounted in a straight line, or plane along the crankcase. The single bank of cylinders may be oriented in either a vertical or an inclined plane with all the pistons driving a common crankshaft. Where it is inclined, it is sometimes called a slant-four. In a specification chart or when an abbreviation is used, an inline-four engine is listed as I4.

The inline-four layout is the simplest design which is in perfect primary balance and confers a degree of mechanical simplicity which makes it popular for economy cars.[1] However, despite its simplicity, it suffers from a secondary imbalance which causes minor vibrations in smaller engines. These vibrations become worse as engine size and power increase, so the more powerful engines used in larger cars generally are more complex designs with more than four cylinders.

Contents

Displacement

This inline engine configuration is the most common in cars with a displacement up to 2.4 litres. The usual "practical" limit of the displacement of inline-four engines in a car is around 2.7 litres. However, Porsche used a 3.0 litre four in its 944 S2 and 968 sports cars, and Rolls Royce produced several 4-cylinder engines of 2838cc with basic cylinder dimensions of 3.5 inch diameter and 4.5 inch stroke (Rolls Royce B40);

Classic and Antique vehicles tended to have larger displacements to develop horsepower and torque. The Model A Ford was built with a 3.3 litre inline-four engine.

Four-cylinder diesel engines, which are lower revving than gasoline engines, often exceed 3.0 litres. Mitsubishi still employs a 3.2 litre four-cylinder turbodiesel in its Pajero (called the Shogun or Montero in certain markets), and Tata Motors employs a 3.0 litre four-cylinder diesel in its Spacio and Sumo Victa.

The Toyota B engine series of diesel engines varies in displacement from 3.0 to 4.1 litres. The largest engine in that series was used in the Mega Cruiser.

Larger four-cylinder engines are used in industrial applications, such as in small trucks and tractors, are often found with displacements up to about 4.6 litres. Diesel engines for stationary, marine and locomotive use (which run at low speeds) are made in much larger sizes.

Displacement can also be very small, as found in kei cars sold in Japan, such as the Subaru EN series; engines that started out at 550 cc and are currently at 660 cc, with variable valve timing, DOHC and superchargers resulting in engines that produce 65 PS (48 kW; 64 bhp).

Balance and smoothness

Computer generated image showing the major internal moving parts of an inline-four engine with belt-driven double overhead camshafts and 4 valves per cylinder.

The inline-four engine is much smoother than one, two, and three cylinder engines, and this has resulted in it becoming the engine of choice for most economy cars, although it can be found in some sports cars as well. However, the inline-four is not a fully balanced configuration.

An even-firing inline-four engine is in primary balance because the pistons are moving in pairs, and one pair of pistons is always moving up at the same time as the other pair is moving down. However, piston acceleration and deceleration are greater in the top half of the crankshaft rotation than in the bottom half, because the connecting rods are not infinitely long. As a result, two pistons are always accelerating faster in one direction, while the other two are accelerating more slowly in the other direction, which leads to a secondary dynamic imbalance that causes an up-and-down vibration at twice crankshaft speed. This imbalance is tolerable in a small, low-displacement, low-power configuration, but the vibrations get worse with increasing size and power.[2]

The reason for the piston's higher speed during the 180° rotation from mid-stroke through top-dead-centre, and back to mid-stroke, is that the minor contribution to the piston's up/down movement from the connecting rod's change of angle here has the same direction as the major contribution to the piston's up/down movement from the up/down movement of the crank pin. By contrast, during the 180° rotation from mid-stroke through bottom-dead-centre and back to mid-stroke the minor contribution to the piston's up/down movement from the connecting rod's change of angle has the opposite direction of the major contribution to the piston's up/down movement from the up/down movement of the crank pin.

Most inline-four engines below 2.0 litres in displacement rely on the damping effect of their engine mounts to reduce the vibrations to acceptable levels . Above 2.0 litres, most modern inline-four engines now use balance shafts to eliminate the second-order harmonic vibrations. In a system invented by Dr. Frederick W. Lanchester in 1911, and popularised by Mitsubishi Motors in the 1970s, an inline-four engine uses two balance shafts, rotating in opposite directions at twice the crankshaft's speed, to offset the differences in piston speed.[3] However, in the past, there were numerous examples of larger inline-fours without balance shafts, such as the Citroën DS 23 2347 cc engine that was a derivative of the Traction Avant engine, the 1948 Austin 2660 cc engine used in the Austin-Healey 100 and Austin Atlantic, the 3.3 litre flathead engine used in the Ford Model A (1927), and the 2.5 litre GM Iron Duke engine used in a number of American cars and trucks. Soviet/Russian GAZ Volga cars and UAZ SUVs, vans and light trucks used aluminium big-bore inline-four engines (2.5 or later 2.9 litres) with no balance shafts in 1950s-1990s. These engines were generally the result of a long incremental evolution process and their power was kept low compared to their capacity. However, the forces increase with the square of the engine speed—that is, doubling the speed makes the vibration four times worse—so modern high-speed inline-fours have more need to use balance shafts to offset the vibrations.[4]

Four cylinder engines also have a smoothness problem in that the power strokes of the pistons do not overlap. With four cylinders and four cycles to complete, each piston must complete its power stroke and come to a complete stop before the next piston can start a new power stroke, resulting in a pause between each power stroke and a pulsating delivery of power. In engines with more cylinders, the power strokes overlap, which gives them a smoother delivery of power and less vibration than a four can achieve. As a result, six and eight cylinder engines are generally used in more luxurious and expensive cars.

Automobile use

Notable production inline-four engines

Ford Model T engine

The smallest automobile production inline-four engine powered the 1961 Mazda P360 Carol kei car. Displacing just 358 cc, the Mazda OHV was a conventional but tiny pushrod engine. Honda produced, from 1963 to 1967, a 356 cc inline-four engine for the T360 truck. Inline-four motorcycle engines are built down to 250 cc, e.g. in the Honda CBR250.

Most inline-four engines, however, have been over 0.7 litres in displacement. A practical upper limit could be placed in the 2.5 litre range for contemporary production cars. Larger engines (up to 4.5 litres) have been seen in racing and light truck use, especially using diesel fuel (an example is the Mercedes-Benz MBE 904). The use of balance shafts allowed Porsche to use a 3.0 litres (2990 cc) inline-four engine on road cars first in the 944 S2 (1989-1991), but the largest modern non-diesel was the plain 3.2 litre (3188 cc) 195 in the 1961 Pontiac Tempest.

Currently, one of the largest inline-four engines is the 2.89 litre UMZ 421 series UMZ engine (Russian engine).

In the early 20th century, bigger engines existed, both in road cars and sports cars. Due to the absence of displacement limit regulations, manufacturers took increasing liberties with engine size. In order to achieve power over 100 horsepower (75 kW), most engine builders simply increased displacement, which could sometimes achieve over 10.0 litres. One of the biggest inline-fours of its time was De Dietrich 17,000 cc engine. Its cubic capacity is over twice the size of the Cadillac's 500 CID 8.2 litre V8 engine, which was considered the largest engine of its type in the 1970s. These engines ran at very low rpm, often less than 1,500 rpm maximum, and had a specific output of about 10 hp/L. The US tractor industry both farm and industrial relied on large four cylinder power units until the early 1960s, when six cylinder designs came into favor. International Harvester built a large 5.7 litre (350 CID) four cylinder for their WD-9 series tractors.

Other technologically or historically notable engines using this configuration include:

Racing use

1913 saw a Peugeot driven by Jules Goux winning the Indianapolis 500. This car was powered by a inline-four engine designed by Ernest Henry. This design was very influential for racing engines as it featured for the first time dual overhead camshafts (DOHC) and four valves per cylinder, a layout that would become the standard until today for racing inline-four engines.[5]

This Peugeot was sold to the American driver "Wild Bob" Burman who broke the engine in 1915. As Peugeot couldn't deliver a new engine during World War I, Burman asked Harry Arminius Miller to build a new engine. With John Edward and Fred Offenhauser, Miller created a Peugeot-inspired inline-four engine. This was the first version of the engine that would dominate the Indianapolis 500 until 1976 under the brand Miller and later Offenhauser. The Offenhausers won five straight victories at Indianapolis from 1971 to 1976, and it was not until 1981 that they were eliminated as competitors by engines such as the Cosworth V8 engine.[6]

Many cars produced for the pre-WWII voiturette Grand Prix motor racing category used inline-four engine designs. 1.5 litre supercharged engines found their way into cars such as the Maserati 4CL and various English Racing Automobiles (ERA) models. These were resurrected after the war, and formed the foundation of what was later to become Formula One, altought the straight-eight supercharged Alfettas would dominate the early years of F1.

Another engine that played an important role in racing history is the inline-four Ferrari engine designed by Aurelio Lampredi. This engine was originally designed as a 2 litre Formula 2 engine for the Ferrari 500, but evolved to 2.5 litres to compete in Formula One in the Ferrari 625.[7] For sports car racing, capacity was increased up to 3.4 litres for the Ferrari 860 Monza.

Yet another very successful engine was the Coventry Climax inline-four originally designed by Walter Hassan as a 1.5 litre Formula 2 engine. Enlarged to 2.0 litres for Formula One in 1958, it evolved into the large 2495 cc FPF that won the Formula One championship in Cooper's chassis in 1959 and 1960.[8]

Motorcycle use

Honda CB750 engine

The smallest production motorcycle inline-four engine was the four-stroke engine powered the 231 cc Benelli/Moto Guzzi 254. For racing, Honda built inline-four engines as small as a 125 cc for the Honda 125/4. This engine was replaced by a 125 cc straight-five engine. The largest proprietary inline-four engine in a commercially-produced motorcycle is the 1402 cc engine in the Suzuki GSX1400.

Modern inline-four motorcycle engines first gained their popularity with Honda's SOHC CB750 in the 1970s. Since then, the inline-four has become one of the most common engine configurations in street bikes. Outside of the cruiser category, the inline-four is simply the most common configuration because of its relatively high performance-to-cost ratio. All of the Japanese motorcycle manufacturers offer motorcycles with inline-four engines, as does MV Agusta and BMW who employ both longitudinal and transverse-mounted engines. Even the modern Triumph company has offered inline-four-powered motorcycles, though they were discontinued in favour of a triple.

The 2009 Yamaha R1 has an interesting inline-four engine that does not fire at even intervals of 180 degrees.

Notes & references

  1. ^ Nunney, Light and Heavy Vehicle Technology, page 12
  2. ^ Nunney, 14-15
  3. ^ Nunney, 42-44
  4. ^ Nunney, 40-44.
  5. ^ Ludvigsen, Classic Racing Engines,pages 14–17
  6. ^ Ludvigsen, 182-185.
  7. ^ Ludvigsen, 78-81 ,86-89.
  8. ^ Ludvigsen, 130-133.
  • Ludvigsen, Karl (2001). Classic Racing Engines. Haynes Publishing. ISBN 1-8596-0649-0.  
  • Nunney, M J (2006). Light and Heavy Vehicle Technology (4th ed.). Butterworth-Heinemann. ISBN 0-7506-8037-7.  

Simple English

]]

The Inline-four engine or Straight-four is an internal combustion engine with all four cylinders. All four cylinders are mounted in a straight line along one crankshaft. It can be powered by different types of fuels, including gasoline, diesel and natural gas.

The single bank of cylinders may be in a vertical direction (straight up), or at an angle. When the cylinders are mounted at an angle, it is sometimes called a slant-four. When listed as an abbreviation, an inline-four engine is listed either as I4 or L4 (for longitudinal). L4 is often used to avoid confusion between the digit 1 and the letter I.

The inline-four layout is a mechanically simple engine. It has a natural basic engine balance. It is smoother than one, two, and three cylinder engines. This makes it popular for economy cars.[1] It does have a problem with secondary engine balance. This causes minor vibrations in smaller engines. These vibrations become worse as engine size and power increase. The more powerful engines used in larger cars use different a engine layout to avoid this problem.

Contents

Displacement

This inline-four gasoline configuration is the most common in cars with a displacement (engine size) up to 2.4 L. Porsche used a 3.0 L four in its 944 S2 and 968 sports cars. Antique vehicles tended to have larger displacements to develop horsepower and torque. The Model A Ford was built with a 3.3 L inline-four engine.

Four-cylinder diesel engines are lower revving than gasoline engines. They often exceed 3.0 L. Toyota made a 4.1 L diesel engine that was used in the Toyota Mega Cruiser. Larger four-cylinder engines are used in industrial applications, are often made with displacements up to about 4.6 L.

Displacement can also be very small. Some cars sold in Japan have engines that are only 660 cc.

Racing use

The 1913 Indianapolis 500 was won by Jules Goux driving a Peugeot. This car was powered by an inline-four engine designed by Ernest Henry. This design was big influence for racing engines. It was the first to use dual overhead camshafts (DOHC) and four valves per cylinder. This became the standard design for racing inline-four engines.[2]

This Peugeot was sold to the American driver "Wild Bob" Burman. Burman broke the engine in 1915. Because of World War I, Peugeot couldn't deliver a new engine. Burman asked Harry Arminius Miller to build a new engine. With John Edward and Fred Offenhauser, Miller created a new engine. Its design was based on the Peugeot inline-four engine. This was the first version of the engine that would dominate the Indianapolis 500 until 1976. At first, the engine was named Miller. Later it became known as Offenhauser. The Offenhauser engines won five straight races at Indianapolis from 1971 to 1976. It was not until 1981 that engines such as the Cosworth V8 engine eliminated them.[3]

Many cars produced for the pre-WWII voiturette Grand Prix motor racing used inline-four engine designs. These cars were rebuilt and reused after the war. They formed the beginnings of what is now Formula One.

Motorcycle use

Modern inline-four motorcycle engines first gained their popularity with Honda's single overhead camshaft CB750 in the 1970s. The inline-four has become one of the most common engine configurations in street bikes The inline-four is common because of its relatively high performance-to-cost ratio. All of the Japanese motorcycle manufacturers offer motorcycles with inline-four engines.

References

  1. Nunney, Light and Heavy Vehicle Technology, page 12
  2. Ludvigsen, Classic Racing Engines,pages 14–17
  3. Ludvigsen, 182-185.
  • Ludvigsen, Karl (2001). Classic Racing Engines. Haynes Publishing. ISBN 1-8596-0649-0. 
  • Nunney, M J (2006). Light and Heavy Vehicle Technology (4th ed.). Butterworth-Heinemann. ISBN 0-7506-8037-7. 
Error creating thumbnail: sh: convert: command not found
Wikimedia Commons has images, video, and/or sound related to:








Got something to say? Make a comment.
Your name
Your email address
Message