The Full Wiki

More info on Kremlin stars

Kremlin stars: Wikis


Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.

Did you know ...

More interesting facts on Kremlin stars

Include this on your site/blog:


From Wikipedia, the free encyclopedia

The Kremlin stars (Russian: Кремлёвские звёзды) are the pentagonal luminescent ruby stars, installed in the 1930s on five towers of the Moscow Kremlin, replacing the gilded eagles that had symbolized Imperial Russia.


A Kremlin star

The first Kremlin star was installed on top of the Spasskaya Tower on October 25, 1935. During the next week, another three stars were installed on the Troitskaya, Nikolskaya and Borovitskaya towers. These stars replaced the huge copper two-headed eagles, installed in pre-revolutionary times, which were a part of the Coat of Arms of Imperial Russia.

The body of each star was made of stainless steel and covered with copper plating. The Kremlin stars were decorated with a hammer and sickle on both sides, made of semi-precious stones from the Ural mountains. The installation of the first Kremlin stars did not meet the designer's expectations since the surfaces of the semi-precious stones lost their luster and required re-faceting. In 1937, these stars were replaced with new ones made of ruby glass, in time for the 20th anniversary of the October Revolution. One more star was also installed on the Vodovzvodnaya tower.

Characteristics of the stars

A Kremlin star

The size and the form of each of the five stars were defined proceeding from the height and architectural features of each corresponding tower. The distance between the end points of beams of the star installed on the Vodovzvodnaya tower equals 3 m, Borovitskaya tower – 3.2 m, Troitskaya tower – 3.5 m, Nikolskaya and Spasskaya towers – 3.75 m. The bearing construction of each of the Kremlin stars is made of stainless steel and represents a spatial pentagonal star, the points of which have the form of a tetrahedral pyramid. The durability and rigidness of the construction was designed to withstand the maximum pressure of a hurricane wind equaling 200 kgf per square meter (2 kPa). Despite the considerable mass of each star (approx. 1 tonne), they revolve pretty easily as the wind changes its direction. Because of its form, each star always positions itself with its frontal side against the wind. The Kremlin stars are illuminated from the inside by filament lamps so that they could be seen against the sky. Even distribution of light inside the stars is ensured by the refractors, which consist of prismatic glass plates. The power of these lamps (3.7 kW in the stars of the Vodovzvodnaya and Borovitskaya towers and 5 kW in the remaining three) ensures good visibility of the stars day and night. The lamps have a luminous efficacy of 22 lm/W. The 5 kW lamps are 383 mm in length, the diameter of their retorts is 177 mm. Each lamp produces a lot of heat, thence, each star has to be cooled off every now and then. For this purpose, each tower is equipped with two fans aimed at the star.

The Nikolskaya Tower

When the stars were being covered with glass, the experts had to take into consideration the fact that the stars had to shine brightly during the night and keep their ruby red color during the day, so that the electrical filament in the lamps remained invisible. Also, the experts had to consider the fact that the red glass illuminated from the outside by the sun appears almost black. In 1946, they installed a combination of different types of glass for the stars, namely, ruby red and milk-white glass with a layer of transparent crystal glass between them. The milk-white glass disperses the light of the lamps and reflects most of the daytime light at the same time, softening the darkness of the ruby glass during the day. In order to achieve more contrast and emphasize the beams of the stars, they installed the ruby glass of different shades, which absorbs only the red rays with a wavelength of no more than 0.62 µm. The thickness of glass in the stars is 6-8 mm. The area of a star covered with glass equals 6 m². The special three-layered glass sheets (milky white, crystal clear and ruby) were manufactured by Gus-Khrustalny glass factory. The ruby layer of the sheets is actually colored by adding colloidal gold to the glass.

The machinery that services the Kremlin stars is located inside the towers. Special lifting devices allow for the periodic cleaning of the stars inside and out, removing dust and soot. The machines replace burnt-out lamps within 30-35 min. Experts in a special control room observe the work of the machinery.


Coordinates: 55°45′9″N 37°37′17″E / 55.7525°N 37.62139°E / 55.7525; 37.62139



Got something to say? Make a comment.
Your name
Your email address