The Full Wiki

LZW: Wikis

Advertisements

Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.

Encyclopedia

(Redirected to Lempel–Ziv–Welch article)

From Wikipedia, the free encyclopedia

Lempel–Ziv–Welch (LZW) is a universal lossless data compression algorithm created by Abraham Lempel, Jacob Ziv, and Terry Welch. It was published by Welch in 1984 as an improved implementation of the LZ78 algorithm published by Lempel and Ziv in 1978. The algorithm is designed to be fast to implement but is not usually optimal because it performs only limited analysis of the data.

Contents

Algorithm

Advertisements

Idea

The scenario described in Welch's 1984 paper[1] encodes sequences of 8-bit data as fixed-length 12-bit codes. The codes from 0 to 255 represent 1-character sequences consisting of the corresponding 8-bit character, and the codes 256 through 4095 are created in a dictionary for sequences encountered in the data as it is encoded. At each stage in compression, input bytes are gathered into a sequence until the next character would make a sequence for which there is no code yet in the dictionary. The code for the sequence (without that character) is emitted, and a new code (for the sequence with that character) is added to the dictionary.

The idea was quickly adapted to other situations. In an image based on a color table, for example, the natural character alphabet is the set of color table indexes, and in the 1980s, many images had small color tables (on the order of 16 colors). For such a reduced alphabet, the full 12-bit codes yielded poor compression unless the image was large, so the idea of a variable-width code was introduced: codes typically start one bit wider than the symbols being encoded, and as each code size is used up, the code width increases by 1 bit, up to some prescribed maximum (typically 12 bits).

Further refinements include reserving a code to indicate that the code table should be cleared (a "clear code", typically the first value immediately after the values for the individual alphabet characters), and a code to indicate the end of data (a "stop code", typically one greater than the clear code). The clear code allows the table to be reinitialized after it fills up, which lets the encoding adapt to changing patterns in the input data. Smart encoders can monitor the compression efficiency and clear the table whenever the existing table no longer matches the input well.

Since the codes are added in a manner determined by the data, the decoder mimics building the table as it sees the resulting codes. It is critical that the encoder and decoder agree on which variety of LZW is being used: the size of the alphabet, the maximum code width, whether variable-width encoding is being used, the initial code size, whether to use the clear and stop codes (and what values they have). Most formats that employ LZW build this information into the format specification or provide explicit fields for them in a compression header for the data.

Encoding

A dictionary is initialized to contain the single-character strings corresponding to all the possible input characters (and nothing else except the clear and stop codes if they're being used). The algorithm works by scanning through the input string for successively longer substrings until it finds one that is not in the dictionary. When such a string is found, the index for the string less the last character (i.e., the longest substring that is in the dictionary) is retrieved from the dictionary and sent to output, and the new string (including the last character) is added to the dictionary with the next available code. The last input character is then used as the next starting point to scan for substrings.

In this way, successively longer strings are registered in the dictionary and made available for subsequent encoding as single output values. The algorithm works best on data with repeated patterns, so the initial parts of a message will see little compression. As the message grows, however, the compression ratio tends asymptotically to the maximum.[2]

Decoding

The decoding algorithm works by reading a value from the encoded input and outputting the corresponding string from the initialized dictionary. At the same time it obtains the next value from the input, and adds to the dictionary the concatenation of the string just output and the first character of the string obtained by decoding the next input value. The decoder then proceeds to the next input value (which was already read in as the "next value" in the previous pass) and repeats the process until there is no more input, at which point the final input value is decoded without any more additions to the dictionary.

In this way the decoder builds up a dictionary which is identical to that used by the encoder, and uses it to decode subsequent input values. Thus the full dictionary does not need be sent with the encoded data; just the initial dictionary containing the single-character strings is sufficient (and is typically defined beforehand within the encoder and decoder rather than being explicitly sent with the encoded data.)

Variable-width codes

If variable-width codes are being used, the encoder and decoder must be careful to change the width at the same points in the encoded data, or they will disagree about where the boundaries between individual codes fall in the stream. In the standard version, the encoder increases the width from p to p + 1 when a sequence ω + s is encountered that is not in the table (so that a code must be added for it) but the next available code in the table is 2p (the first code requiring p + 1 bits). The encoder emits the code for ω at width p (since that code does not require p + 1 bits), and then increases the code width so that the next code emitted will be p + 1 bits wide.

The decoder is always one code behind the encoder in building the table, so when it sees the code for ω, it will generate an entry for code 2p − 1. Since this is the point where the encoder will increase the code width, the decoder must increase the width here as well: at the point where it generates the largest code that will fit in p bits.

Unfortunately some early implementations of the algorithm increase the code width and then emit ω at the new width instead of the old width, so that to the decoder it looks like the width changes one code too early. This is called "Early Change"; it caused so much confusion that Adobe now allows both versions in PDF files, but includes an explicit flag in the header of each LZW-compressed stream to indicate whether Early Change is being used. Most graphic file formats do not use Early Change.

When the table is cleared in response to a clear code, both encoder and decoder change the code width after the clear code back to the initial code width.

Packing order

Since the codes emitted typically do not fall on byte boundaries, the encoder and decoder must agree on how codes are packed into bytes. The two common methods are LSB-First ("Least Significant Bit First") and MSB-First ("Most Significant Bit First"). In LSB-First packing, the first code is aligned so that the least significant bit of the code falls in the least significant bit of the first stream byte, and if the code has more than 8 bits, the high order bits left over are aligned with the least significant bit of the next byte; further codes are packed with LSB going into the least significant bit not yet used in the current stream byte, proceeding into further bytes as necessary. MSB-first packing aligns the first code so that its most significant bit falls in the MSB of the first stream byte, with overflow aligned with the MSB of the next byte; further codes are written with MSB going into the most significant bit not yet used in the current stream byte.

GIF files use LSB-First packing order. TIFF files and PDF files use MSB-First packing order.

Example

The following example illustrates the LZW algorithm in action, showing the status of the output and the dictionary at every stage, both in encoding and decoding the data. This example has been constructed to give reasonable compression on a very short message. In real text data, repetition is generally less pronounced, so longer input streams are typically necessary before the compression builds up efficiency.

The plaintext to be encoded (from an alphabet using only the capital letters) is:

TOBEORNOTTOBEORTOBEORNOT#

The # is a marker used to show that the end of the message has been reached. There are thus 26 symbols in the plaintext alphabet (the 26 capital letters A through Z), plus the stop code #. We arbitrarily assign these the values 1 through 26, and 0. (Most flavors of LZW would put the stop code after the data alphabet, but nothing in the basic algorithm requires that. The encoder and decoder only have to agree what value it has.)

A computer will render these as strings of bits. Five-bit codes are needed to give sufficient combinations to encompass this set of 27 values. The dictionary is initialized with these 27 values. As the dictionary grows, the codes will need to grow in width to accommodate the additional entries. A 5-bit code gives 25 = 32 possible combinations of bits, so when the 33rd dictionary word is created, the algorithm will have to start using 6-bit strings (for all codes, including those which were previously represented by only five bits). Note that since the all-zero code 00000 is used, and is labeled "0", the 33rd dictionary entry will be labeled 32.

The initial dictionary, then, will consist of the following entries:

# = 00000 = 0
A = 00001 = 1
B = 00010
C = 00011
.
.
.
Z = 11010 = 26

Encoding

Buffer input characters in a sequence ω until ω + next character is not in the dictionary. Emit the code for ω, and add ω + next character to the dictionary. Start buffering again with the next character.

Current  Next     Output      Extended
Sequence Char  Code   Bits    Dictionary
-------  ----  ---  ------    ----------
NULL     T 
T        O     20 =  10100    27:     TO <-- 27 = first available code after 0 through 26
O        B     15 =  01111    28:     OB
B        E      2 =  00010    29:     BE
E        O      5 =  00101    30:     EO
O        R     15 =  01111    31:     OR 
R        N     18 =  10010    32:     RN <-- 32 requires 6 bits, so for next output use 6 bits
N        O     14 = 001110    33:     NO
O        T     15 = 001111    34:     OT
T        T     20 = 010100    35:     TT
TO       B     27 = 011011    36:    TOB
BE       O     29 = 011101    37:    BEO
OR       T     31 = 011111    38:    ORT
TOB      E     36 = 100100    39:   TOBE
EO       R     30 = 011110    40:    EOR
RN       O     32 = 100000    41:    RNO
OT       #     34 = 100010               <--- # stops the algorithm; send the cur seq
                0 = 000000                    and the stop code

Unencoded length = 25*5       = 125 bits
Encoded length   = 6*5 + 11*6 =  96 bits.

Using LZW has saved 29 bits out of 125, reducing the message by almost 22%. If the message were longer, then the dictionary words would begin to represent longer and longer sections of text, allowing repeated words to be sent very compactly.

Decoding

To decode an LZW-compressed archive, one needs to know in advance the initial dictionary used, but additional entries can be reconstructed as they are always simply concatenations of previous entries.

    Input     Output     New Dictionary Entry
 Bits   Code Sequence     Full     Conjecture
------  ---- --------   --------   ----------
 10100 = 20     T                    27: T?
 01111 = 15     O       27: TO       28: O?
 00010 =  2     B       28: OB       29: B?
 00101 =  5     E       29: BE       30: E?
 01111 = 15     O       30: EO       31: O?
 10010 = 18     R       31: OR  <--- 32: R? ----- created code 31 (last to fit in 5 bits);
001110 = 14     N       32: RN       33: N?       so start using 6 bits
001111 = 15     O       33: NO       34: O?
010100 = 20     T       34: OT       35: T?
011011 = 27     TO      35: TT       36: TO?
011101 = 29     BE      36: TOB <--- 37: BE? ---- 36 = TO + 1st symbol (B) of 
011111 = 31     OR      37: BEO      38: OR?      next coded sequence received (BE)
100100 = 36     TOB     38: ORT      49: TOB?
011110 = 30     EO      39: TOBE     40: EO?
100000 = 32     RN      40: EOR      41: RN?
100010 = 34     OT      41: RNO      42: OT?
000000 =  0     #


At each stage, the decoder receives a code X; it looks X up in the table and outputs the sequence χ it codes, and it conjectures χ + ? as the entry the encoder just added — because the encoder emitted X for χ precisely because χ + ? was not in the table, and the encoder goes ahead and adds it. But what is the missing letter? It is the first letter in the sequence coded by the next code Z that the decoder receives. So the decoder looks up Z, decodes it into the sequence ω and takes the first letter z and tacks it onto the end of χ as the next dictionary entry.

This works as long as the codes received are in the decoder's dictionary, so that they can be decoded into sequences. What happens if the decoder receives a code Z that is not yet in its dictionary? Since the decoder is always just one code behind the encoder, Z can be in the encoder's dictionary only if the encoder just generated it, when emitting the previous code X for χ. Thus Z codes some ω that is χ + ?, and the decoder can determine the unknown character as follows:

  1. The decoder sees X and then Z.
  2. It knows these code the sequence χ + some unknown sequence ω.
  3. It knows the encoder just added Z to code χ + some unknown character,
  4. and it knows that the unknown character is the first letter z of ω.
  5. But the first letter of ω (= χ + ?) must then also be the first letter of χ.
  6. So ω must be χ + x, where x is the first letter of χ.
  7. So the decoder figures out what Z codes even though it's not in the table,
  8. and upon receiving Z, the decoder decodes it as χ + x, and adds χ + x to the table.

This situation occurs whenever the encoder encounters input of the form cScSc, where c is a single character, S is a string and cS is already in the dictionary, but cSc is not. The encoder emits the code for cS, putting a new code for cSc into the dictionary. Next it sees cSc in the input (starting at the second c of cScSc) and emits the new code it just inserted. The argument above shows that whenever the decoder receives a code not in its dictionary, the situation must look like this.

Although input of form cScSc might seem unlikely, this pattern is fairly common when the input stream is characterized by significant repetition. In particular, long strings of a single character (which are common in the kinds of images LZW is often used to encode) repeatedly generate patterns of this sort.

Further coding

The simple scheme described above focuses on the LZW algorithm itself. Many applications apply further encoding to the sequence of output symbols. Some package the coded stream as printable characters using some form of Binary-to-text encoding; this will increase the encoded length and decrease the compression frequency. Conversely, increased compression can often be achieved with an adaptive entropy encoder. Such a coder estimates the probability distribution for the value of the next symbol, based on the observed frequencies of values so far. A standard entropy encoding such as Huffman coding or arithmetic coding then uses shorter codes for values with higher probabilities.

Uses

The method became widely used in the program compress, which became a more or less standard utility in Unix systems circa 1986. (It has since disappeared from many for both legal and technical reasons, but as of 2008 at least FreeBSD includes the utility of compress and uncompress as a part of the distribution.) Several other popular compression utilities also used the method, or closely related ones.

It became very widely used after it became part of the GIF image format in 1987. It may also (optionally) be used in TIFF files.

LZW compression provided a better compression ratio, in most applications, than any well-known method available up to that time. It became the first widely used universal data compression method on computers. It would typically compress large English texts to about half of their original sizes.

Today, an implementation of the algorithm is contained within the popular Adobe Acrobat software program. Acrobat, however, by default uses the DEFLATE algorithm for most text and color-table-based image data.

Patents

Various patents have been issued in the United States and other countries for LZW and similar algorithms. LZ78 was covered by U.S. Patent 4,464,650 by Lempel, Ziv, Cohn, and Eastman, assigned to Sperry Corporation, later Unisys Corporation, filed on August 10, 1981. Two US patents were issued for the LZW algorithm: U.S. Patent 4,814,746 by Victor S. Miller and Mark N. Wegman and assigned to IBM, originally filed on June 1, 1983, and U.S. Patent 4,558,302 by Welch, assigned to Sperry Corporation, later Unisys Corporation, filed on June 20, 1983. On June 20, 2003, this patent on the LZW algorithm expired [1].

US Patent 4,558,302 received a lot of negative press after LZW compression was used in the GIF image format (see Graphics Interchange Format#Unisys and LZW patent enforcement).

Variants

  • LZMW (1985, by V. Miller, M. Wegman)[3] – Searches input for the longest string already in the dictionary (the "current" match); adds the concatenation of the previous match with the current match to the dictionary. (Dictionary entries thus grow more rapidly; but this scheme is much more complicated to implement.) Miller and Wegman also suggest deleting low frequency entries from the dictionary when the dictionary fills up.
  • LZAP (1988, by James Storer)[4] – modification of LZMW: instead of adding just the concatenation of the previous match with the current match to the dictionary, add the concatenations of the previous match with each initial substring of the current match. ("AP" stands for "all prefixes".) For example, if the previous match is "wiki" and current match is "pedia", then the LZAP encoder adds 5 new sequences to the dictionary: "wikip", "wikipe", "wikiped", "wikipedi", and "wikipedia", where the LZMW encoder adds only the one sequence "wikipedia". This eliminates some of the complexity of LZMW, at the price of adding more dictionary entries.
  • LZWL is a syllable-based variant of LZW.

See also

References

  1. ^ Terry Welch, "A Technique for High-Performance Data Compression", IEEE Computer, June 1984, p. 8–19.
  2. ^ Jacob Ziv and Abraham Lempel; Compression of Individual Sequences Via Variable-Rate Coding, IEEE Transactions on Information Theory, September 1978.
  3. ^ David Salomon, Data Compression – The complete reference, 4th ed., page 209
  4. ^ David Salomon, Data Compression – The complete reference, 4th ed., page 212

External links


Wiktionary

Up to date as of January 15, 2010

Definition from Wiktionary, a free dictionary

English

Etymology

From the names of its creators: Abraham Lempel, Jacob Ziv, and Terry Welch.

Initialism

LZW

  1. (computing) Lempel-Ziv-Welch, a lossless data compression algorithm.

Advertisements






Got something to say? Make a comment.
Your name
Your email address
Message