The Full Wiki

More info on Laser microtome

Laser microtome: Wikis

Advertisements

Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.

Encyclopedia

From Wikipedia, the free encyclopedia

The laser microtome is an instrument used for non-contact sectioning of biological tissues or materials. It was developed by the Rowiak GmbH, a spin-off of the Laser Centre Hannover.

In contrast to mechanically working microtomes, the laser microtome does not require sample preparation techniques such as freezing, dehydration or embedding. It has the ability to slice tissue in its native state. Depending on the material being processed, slice thicknesses of 10 to 100 µm are feasible.

Principle

The cutting process is performed by a femtosecond laser, emitting radiation in the near-infrared range. Within this wavelength range, the laser is able to penetrate the tissue up to a certain depth without causing thermal damage. By tight focussing the laser radiation, intensities over 1 TW/cm2 (1 TW = 1012 watts) arise inside the laser focus. These extreme intensities induce nonlinear effects and optical breakdown occurs. This causes the disruption of the material, limited to the focal point. The process is known as photodisruption.

Due to the ultra short pulse duration of only a few femtoseconds (1 fs = 10−15 seconds) there is only very low energy of a few nanojoules (1 nJ = 10−9 joules) per laser pulse deposits into the tissue. This limits the interaction range to diameters below one micrometer (1 μm = 10−6 meters). Out of this range there is no thermal damage.

Moved by a fast scanner, the laser beam writes a cutting plane into the sample. A positioning unit moves the sample simultaneously, so that the sample can be processed within a short time.


Advertisements






Got something to say? Make a comment.
Your name
Your email address
Message