A fluid flowing past the surface of a body exerts a surface force on it. Lift is defined to be the component of this force that is perpendicular to the oncoming flow direction.^{[1]} It contrasts with the drag force, which is defined to be the component of the surface force parallel to the flow direction.
Contents

If the fluid is air, the force is called an aerodynamic force. An airfoil is a streamlined shape that is capable of generating significantly more lift than drag.^{[2]} Aerodynamic lift is commonly associated with the wing of a fixedwing aircraft, although lift is also generated by propellers; helicopter rotors; rudders, sails and keels on sailboats; hydrofoils; wings on auto racing cars; wind turbines and other streamlined objects. While common meanings of the word "lift" suggest that lift opposes gravity, lift can be in any direction. When an aircraft is flying straight and level (cruise) most^{[3]} of the lift opposes gravity. However, when an aircraft is climbing, descending, or banking in a turn, for example, the lift is tilted with respect to the vertical.^{[4]} Lift may also be entirely downwards in some aerobatic manoeuvres, or on the wing on a racing car. In this last case, the term downforce is often used. Lift may also be horizontal, for instance on a sail on a sailboat
Nonstreamlined objects such as bluff bodies and plates (not parallel to the flow) may also generate lift when moving relative to the fluid. This lift may be steady, or it may oscillate due to vortex shedding. Interaction of the object's flexibility with the vortex shedding may enhance the effects of fluctuating lift and cause vortexinduced vibrations.^{[5]}
There are several ways to explain how an airfoil generates lift. Some are more complicated or more mathematically rigorous than others; some have been shown to be incorrect.^{[6]} This article will start with the simpler, more common explanations.
The cause of the aerodynamic lifting force is the downward acceleration of air by the airfoil
– Klaus Weltner and Martin IngelmanSundberg ^{[7]}
One way to explain lift is to observe the direct relationship between the lift force and the downward deflection of the air by the wing. John D. Anderson explains it as follows: "...the wing exerts a force on the air, pushing the flow downward. From Newton's third law, the equal and opposite reaction produces a lift."^{[8]}
This explanation relies on the second and third of Newton's laws of motion: The net force on an object is equal to its rate of momentum change and To every action there is an equal and opposite reaction. ^{[9]}
This explanation of lift was used in the 1944 book Stick and Rudder by aviation writer Wolfgang Langewiesche: "… the wing keeps the airplane up by pushing the air down."^{[10]} Consequently, the lift is directly related to the deflection of the flow field behind the airfoil.
Another way to think about it is to observe that the air "turns" as it passes the airfoil and follows a path that is curved. When airflow changes direction, a force is generated.^{[11]}
If one wants to think in terms of air pressure, pressure is just force per unit area so wherever there is force there is pressure. Curved streamlines imply a force and therefore also pressure. "...where there is curved fluid flow, there is a pressure difference (i.e., lift) " ^{[12]}^{[13]} This pressure difference implies higher pressure on the underside of the wing and lower pressure on the upper side.


An explanation of lift frequently encountered in basic or popular sources is the equal transittime theory. Equal transittime states that because of the longer path of the upper surface of an airfoil, the air going over the top must go faster in order to catch up with the air flowing around the bottom.^{[14]} i.e. the parcels of air that are divided at the leading edge and travel above and below an airfoil must rejoin when they reach the trailing edge. Bernoulli's Principle is then cited to conclude that since the air moves faster on the top of the wing the air pressure must be lower. This pressure difference pushes the wing up.
However, equal transit time is not accurate^{[15]} and the fact that this is not generally the case can be readily observed.^{[16]} Although it is true that the air moving over the top of a wing generating lift does move faster, there is no requirement for equal transit time. In fact the air moving over the top of an airfoil generating lift is always moving much faster than the equal transit theory would imply.^{[6]}
The assertion that the air must arrive simultaneously at the trailing edge is sometimes referred to as the "Equal TransitTime Fallacy".^{[17]} ^{[18]} ^{[19]} ^{[20]}
Note that while this theory depends on Bernoulli's Principle, the fact that this theory has been discredited does not imply that Bernoulli's Principle is incorrect.
Lift is generated in accordance with the fundamental principles of physics. The most relevant physics reduce to three principles:
In the last principle, the pressure depends on the other flow properties, such as its mass density, through the (thermodynamic) equation of state, while the shear stresses are related to the flow through the air's viscosity.^{[21]} Application of the viscous shear stresses to Newton's second law for an airflow results in the Navier–Stokes equations. But in many instances approximations suffice for a good description of lifting airfoils: in large parts of the flow viscosity may be neglected. Such an inviscid flow can be described mathematically through the Euler equations, resulting from the NavierStokes equations when the viscosity is neglected.
The Euler equations for a steady and inviscid flow can be integrated along a streamline, resulting in Bernoulli's equation. The particular form of Bernoulli's equation found depends on the equation of state used.^{[22]} At low Mach numbers, compressibility effects may be neglected, resulting in an incompressible flow approximation. In incompressible and inviscid flow the Bernoulli equation is just an integration of Newton's second law—in the form of the description of momentum evolution by the Euler equations—along a streamline.^{[22]}
Explaining lift while considering all of the principles involved is a complex task and is not easily simplified.^{[8]}^{[23]} As a result, there are numerous different explanations of lift with different levels of rigour and complexity. For example, there is an explanation based directly on Newton’s laws of motion; and an explanation based on Bernoulli’s principle. Neither of these explanations is incorrect, but each appeals to a different audience.^{[24]}
In order to explain lift as it applies to an airplane wing, consider the incompressible flow around a 2D, symmetric airfoil at positive angle of attack in a uniform free stream. Instead of considering the case where an airfoil moves through a fluid as seen by a stationary observer, it is equivalent and simpler to consider the picture when the observer follows the airfoil and the fluid moves past it.
If one takes the experimentally observed flow around an airfoil as a starting point, then lift can be explained in terms of pressures using Bernoulli's principle (which can be derived from Newton's second law) and conservation of mass.^{[8]}
The image to the right shows the streamlines over a NACA 0012 airfoil computed using potential flow theory, a simplified model of the real flow. The flow approaching an airfoil can be divided into two streamtubes, which are defined based on the area between two streamlines. By definition, fluid never crosses a streamline in a steady flow; hence mass is conserved within each streamtube. One streamtube travels over the upper surface, while the other travels over the lower surface; dividing these two tubes is a dividing line (the stagnation streamline) that intersects the airfoil on the lower surface, typically near to the leading edge. The stagnation streamline leaves the airfoil at the sharp trailing edge, a feature of the flow known as the Kutta condition. In calculating the flow shown, the Kutta condition was imposed as an initial assumption; the justification for this assumption is explained below.
The upper stream tube constricts as it flows up and around the airfoil, a part of the socalled upwash. From the conservation of mass, the flow speed must increase as the stream tube area decreases.^{[8]} The area of the lower stream tube increases, causing the flow inside the tube to slow down. It is typically the case that the air parcels traveling over the upper surface will reach the trailing edge before those traveling over the bottom.
From Bernoulli's principle, the pressure on the upper surface where the flow is moving faster is lower than the pressure on the lower surface. The pressure difference thus creates a net aerodynamic force, pointing upward and downstream to the flow direction. The component of the force normal to the free stream is considered to be lift; the component parallel to the free stream is drag. In conjunction with this force by the air on the airfoil, by Newton's third law, the airfoil imparts an equalandopposite force on the surrounding air that creates the downwash. Measuring the momentum transferred to the downwash is another way to determine the amount of lift on the airfoil.^{[25]}
In attempting to explain why the flow follows the upper surface of the airfoil, the situation gets considerably more complex. It is here that many simplifications are made in presenting lift to various audiences, some of which are explained after this section.
Consider the case of an airfoil accelerating from rest in a viscous flow. Lift depends entirely on the nature of viscous flow past certain bodies^{[26]}: in inviscid flow (i.e. assuming that viscous forces are negligible in comparison to inertial forces), there is no lift without imposing a net circulation, the proper amount of which can be determined by applying the Kutta condition. In a viscous flow like in the physical world, however, the lift and other properties arise naturally as described here.
When there is no flow, there is no lift and the forces acting on the airfoil are zero. At the instant when the flow is “turned on”, the flow is undeflected downstream of the airfoil and there are two stagnation points on the airfoil (where the flow velocity is zero): one near the leading edge on the bottom surface, and another on the upper surface near the trailing edge. The dividing line between the upper and lower streamtubes mentioned above intersects the body at the stagnation points. Since the flow speed is zero at these points, by Bernoulli's principle the static pressure at these points is at a maximum. As long as the second stagnation point is at its initial location on the upper surface of the wing, the circulation around the airfoil is zero and, in accordance with the Kutta–Joukowski theorem, there is no lift. The net pressure difference between the upper and lower surfaces is zero.
The effects of viscosity are contained within a thin layer of fluid called the boundary layer, close to the body. As flow over the airfoil commences, the flow along the lower surface turns at the sharp trailing edge and flows along the upper surface towards the upper stagnation point. The flow in the vicinity of the sharp trailing edge is very fast and the resulting viscous forces cause the boundary layer to accumulate into a vortex on the upper side of the airfoil between the trailing edge and the upper stagnation point.^{[27]} This is called the starting vortex. The starting vortex and the bound vortex around the surface of the wing are two halves of a closed loop. As the starting vortex increases in strength the bound vortex also strengthens, causing the flow over the upper surface of the airfoil to accelerate and drive the upper stagnation point towards the sharp trailing edge. As this happens, the starting vortex is shed into the wake,^{[28]} and is a necessary condition to produce lift on an airfoil. If the flow were stopped, there would be a corresponding "stopping vortex".^{[29]} Despite being an idealization of the real world, the “vortex system” set up around a wing is both real and observable; the trailing vortex sheet most noticeably rolls up into wingtip vortices.
The upper stagnation point continues moving downstream until it is coincident with the sharp trailing edge (as stated by the Kutta condition). The flow downstream of the airfoil is deflected downward from the freestream direction and, from the reasoning above in the basic explanation, there is now a net pressure difference between the upper and lower surfaces and an aerodynamic force is generated.
It is amazing that today, almost 100 years after the first flight of the Wright Flyer, groups of engineers, scientists, pilots, and others can gather together and have a spirited debate on how an airplane wing generates lift. Various explanations are put forth, and the debate centers on which explanation is the most fundamental.
– John D. Anderson^{[8]}
Many other alternative explanations for the generation of lift by an airfoil have been put forward, of which a few are presented here. Most of them are intended to explain the phenomenon of lift to a general audience. Although the explanations may share features in common with the explanation above, additional assumptions and simplifications may be introduced. This can reduce the validity of an alternative explanation to a limited subclass of lift generating conditions, or might not allow a quantitative analysis. Several theories introduce assumptions which proved to be wrong, like the equal transittime theory.
In a limited sense, the Coandă effect refers to the tendency of a fluid jet to stay attached to an adjacent surface that curves away from the flow, and the resultant entrainment of ambient air into the flow. The effect is named for Henri Coandă, the Romanian aerodynamicist who exploited it in many of his patents.
One of the first known uses was in his patent for a highlift device^{[30]} that used a fan of gas exiting at high speed from an internal compressor. This circular spray was directed radially over the top of a curved surface shaped like a lens to decrease the pressure on that surface. The total lift for the device was caused by the difference between this pressure and that on the bottom of the craft. Two aircraft, the Antonov An72 and An74 "Coaler", use the exhaust from topmounted jet engines flowing over the wing to enhance lift,^{[31]} as do the Boeing YC14 and the McDonnell Douglas YC15.^{[32]} ^{[33]} The effect is also used in highlift devices such as a blown flap.^{[34]}
More broadly, some consider the effect to include the tendency of any fluid boundary layer to adhere to a curved surface, not just the boundary layer accompanying a fluid jet. It is in this broader sense that the Coandă effect is used by some to explain lift.^{[35]} Jef Raskin^{[36]}, for example, describes a simple demonstration, using a straw to blow over the upper surface of a wing. The wing deflects upwards, thus supposedly demonstrating that the Coandă effect creates lift. This demonstration correctly demonstrates the Coandă effect as a fluid jet (the exhaust from a straw) adhering to a curved surface (the wing). However, the upper surface in this flow is a complicated, vortexladen mixing layer, while on the lower surface the flow is quiescent. The physics of this demonstration are very different from that of the general flow over the wing.^{[37]} The usage in this sense is encountered in some popular references on aerodynamics.^{[35]}^{[36]} In the aerodynamics field, the Coandă effect is commonly defined in the more limited sense above^{[37]}^{[38]}^{[39]} and viscosity is used to explain why the boundary layer attaches to the surface of a wing.^{[29]}
When a fluid flows relative to a solid body, the body obstructs the flow, causing some of the fluid to change its speed and direction in order to flow around the body. The obstructive nature of the solid body causes the streamlines to move closer together in some places, and further apart in others.^{[8]}^{[40]}^{[41]} When fluid flows past a 2D cambered airfoil at zero angle of attack, the upper surface has a greater area (that is, the interior area of the airfoil above the chordline) than the lower surface and hence presents a greater obstruction to the fluid than the lower surface.^{[40]} This asymmetry causes the streamlines in the fluid flowing over the upper surface to move closer together than the streamlines over the lower surface. As a consequence of mass conservation, the reduced area between the streamlines over the upper surface results in a higher velocity than that over the lower surface. The upper streamtube is squashed the most in the nose region ahead of the maximum thickness of the airfoil, causing the maximum velocity to occur ahead of the maximum thickness.^{[8]}
In accordance with Bernoulli's principle, where the fluid is moving faster the pressure is lower, and where the fluid is moving slower the pressure is greater. The fluid is moving faster over the upper surface, particularly near the leading edge, than over the lower surface so the pressure on the upper surface is lower than the pressure on the lower surface. The difference in pressure between the upper and lower surfaces results in lift.^{[8]}
If the lift coefficient for a wing at a specified angle of attack is known (or estimated using a method such as thinairfoil theory), then the lift produced for specific flow conditions can be determined using the following equation:^{[42]}
where
This equation is basically the same as the drag equation, only the lift/drag coefficient is different.
Lift can be calculated using potential flow theory by imposing a circulation. It is often used by practicing aerodynamicists as a convenient quantity in calculations, for example thinairfoil theory and liftingline theory.
The circulation Γ is the line integral of the velocity of the air, in a closed loop around the boundary of an airfoil. It can be understood as the total amount of "spinning" (or vorticity) of air around the airfoil. The section lift/span L' can be calculated using the Kutta–Joukowski theorem:^{[25]}
where ρ is the air density, V is the freestream airspeed. Kelvin's circulation theorem states that circulation is conserved.^{[44]} There is conservation of the air's angular momentum. When an aircraft is at rest, there is no circulation.
The challenge when using the Kutta–Joukowski theorem to determine lift is to determine the appropriate circulation for a particular airfoil. In practice, this is done by applying the Kutta condition, which uniquely prescribes the circulation for a given geometry and freestream velocity.
A physical understanding of the theorem can be observed in the Magnus effect, which is a lift force generated by a spinning cylinder in a free stream. Here the necessary circulation is induced by the mechanical rotation acting on the boundary layer, causing it to induce a faster flow around one side of the cylinder and a slower flow around the other. The asymmetric distribution of airspeed around the cylinder then produces a circulation in the outer inviscid flow.^{[45]}
The force on the wing can be examined in terms of the pressure differences above and below the wing, which can be related to velocity changes by Bernoulli's principle.
The total lift force is the integral of vertical pressure forces over the entire wetted surface area of the wing:^{[46]}
where:
The above lift equation neglects the skin friction forces, which typically have a negligible contribution to the lift compared to the pressure forces. By using the streamwise vector i parallel to the freestream in place of k in the integral, we obtain an expression for the pressure drag D_{p} (which includes induced drag in a 3D wing). If we use the spanwise vector j, we obtain the side force Y.
One method for calculating the pressure is Bernoulli's equation, which is the mathematical expression of Bernoulli's principle. This method ignores the effects of viscosity, which can be important in the boundary layer and to predict friction drag, which is the other component of the total drag in addition to D_{p}.
The Bernoulli principle states that the sum total of energy within a parcel of fluid remains constant as long as no energy is added or removed. It is a statement of the principle of the conservation of energy applied to flowing fluids.
A substantial simplification of this proposes that as other forms of energy changes are inconsequential during the flow of air around a wing and that energy transfer in/out of the air is not significant, then the sum of pressure energy and speed energy for any particular parcel of air must be constant. Consequently, an increase in speed must be accompanied by a decrease in pressure and viceversa. It should be noted that this is not a causational relationship. Rather, it is a coincidental relationship, whatever causes one must also cause the other as energy can neither be created nor destroyed. It is named for the DutchSwiss mathematician and scientist Daniel Bernoulli, though it was previously understood by Leonhard Euler and others.
Bernoulli's principle provides an explanation of pressure difference in the absence of air density and temperature variation (a common approximation for lowspeed aircraft). If the air density and temperature are the same above and below a wing, a naive application of the ideal gas law requires that the pressure also be the same. Bernoulli's principle, by including air velocity, explains this pressure difference. The principle does not, however, specify the air velocity. This must come from another source, e.g., experimental data.
In order to solve for the velocity of inviscid flow around a wing, the Kutta condition must be applied to simulate the effects of inertia and viscosity. The Kutta condition allows for the correct choice among an infinite number of flow solutions that otherwise obey the laws of conservation of mass and conservation of momentum.
The flow around bluff bodies may also generate lift, besides a strong drag force. For instance, the flow around a circular cylinder generates a Kármán vortex street: vortices being shed in an alternating fashion from each side of the cylinder. The oscillatory nature of the flow is reflected in the fluctuating lift force on the cylinder, whereas the mean lift force is negligible. The lift force frequency is characterised by the dimensionless Strouhal number, which depends (among others) on the Reynolds number of the flow.^{[47]}^{[48]}
For a flexible structure, this oscillatory lift force may induce vortexinduced vibrations. Under certain conditions — for instance resonance or strong spanwise correlation of the lift force — the resulting motion of the structure due to the lift fluctuations may be strongly enhanced. Such vibrations may pose problems, even collapse, in manmade tall structures like for instance industrial chimneys, if not properly taken care of in the design.^{[5]}
The lift force, lifting force or simply lift is the sum of all the forces on a body that force it to move perpendicular to the direction of flow.
The most common type of lift is that of a wing of an aircraft. But there are many other common uses such as propellers on both aircraft and boats, rotors on helicopters, fan blades, sails on sailboats and wind turbines.
While the common meaning of the term "lift" suggests an "upwards" action, in fact, the direction of lift (and its definition) does not depend on the meaning of "up" and "down".
There are a number of ways of explaining the production of lift, all of which are equivalent. That is, there are different expressions of the same underlying physical principles.
