The Full Wiki

More info on M132 Armored Flamethrower

M132 Armored Flamethrower: Wikis


Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.


From Wikipedia, the free encyclopedia

The M132 was a United States built flamethrower armed variant of the M113 and M113A1 armored personnel carriers developed in the early 1960s. Approximately 350 were accepted into service.

The first prototype of the vehicle was produced in August 1962 when a flamethrower was mounted on a M113. This prototype was only used in combat situations four times that year.

In December 1964, the first armored Cavalry was sent two M132 flamethrower armored vehicles. Based on combat experiences with the vehicle the Army Concept Team advised that four M132s and two M113s be shipped to each regiment.


The vehicle was based on an M113. The driver sits in the front left of the hull. A small cupola in the center of the hull mounts an M10-8 flame gun with a coaxial 7.62 mm caliber M73 machine gun. The weapons could be traversed though 360 degrees and elevated to +55 degrees and depressed to -15 degree. The passenger compartment was removed, and replaced with an M10 fuel and pressure unit and four spherical 50 gallon fuel tanks.

The 200 gallon fuel capacity enabled it to fire for 32 seconds, and the pressure unit enabled it to reach targets at a range of 200 meters.


  • Manufacturer: FMC Corp
  • Combat weight: 23,330 lbs (10,580 kg)
  • Armor thickness: 1.125 inches to 1.75 inches (2.858 cm to 4.45 cm)
  • Engine: Chrysler 75M; 8 cylinder, 4 cycle, vee gasoline
  • Fuel capacity: 80 gallons (300 litres)
  • Engine power: 215 hp at 4000rpm
  • Torque: 332ft¬∑lbf at 2800 rpm
  • Transmission: Allison TX-200-2A
  • Max speed (on flat road): 40 mph (64 km/h)



Got something to say? Make a comment.
Your name
Your email address