MPEG transport stream: Wikis

Advertisements
  

Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.

Encyclopedia

From Wikipedia, the free encyclopedia

Multiple MPEG programs are combined then sent to a transmitting antenna. In the US broadcast digital TV system, an ATSC receiver then decodes the TS and displays it. In most other parts of the world, transmission would be accomplished by one or more variants of the modular DVB system.
MPEG Transport Stream
Internet media type video/MP2T
Developed by MPEG
Type of format Media container
Container for Audio, video, data
Extended to M2TS, TOD
Standard(s) ISO/IEC 13818-1, ITU-T Recommendation H.222.0

Transport stream (TS, TP, MPEG-TS, or M2T) is a communications protocol for audio, video, and data. It is a type of digital container format encapsulating packetized elementary streams and other data. TS is specified in MPEG-2 Part 1, Systems (ISO/IEC standard 13818-1).[1] It is also known as ITU-T Rec. H.222.0. Its design goal is to allow multiplexing of digital video and audio and to synchronize the output. Transport stream offers features for error correction for transportation over unreliable media, and is used in broadcast applications such as DVB and ATSC. It is contrasted with MPEG program stream, designed for more reliable media such as DVDs.

Contents

Layers of communication

Similar to the OSI network protocol stack, a transport stream is processed by the receiver in layers. An example stream containing video may be processed as follows:

  1. Composition of the various programs
  2. Packetized Elementary Stream (PES)
  3. Elementary stream (ES) — audio or video (the below is for video only)
  4. Group of pictures (GOP) — providing random access points
  5. Slice — preventing an error from being propagated through intra prediction
  6. Macroblock—consisting of 6 to 12 DCT blocks
  7. Encoding block or just block—a DCT encoding block, 8x8 pixels

An example of data that is muxed into the transport stream is an electronic program guide. See Program and System Information Protocol for more information.

Important elements of a transport stream

Advertisements

Packet

Partial Transport Stream Packet Format
Name Number
of bits
Description
sync byte 8 0x47
Transport Error Indicator (TEI) 1 Set by demodulator if can't correct errors in the stream ,to tell the demultiplexer that the packet has an uncorrectable error [2]
Payload Unit Start Indicator 1 1 means start of PES data or PSI otherwise zero only.
Transport Priority 1 1 means higher priority than other packets with the same PID.
PID 13 Packet ID
Scrambling control 2 '00' = Not scrambled.   The following per DVB spec:[3]   '01' = Reserved for future use,   '10' = Scrambled with even key,   '11' = Scrambled with odd key
Adaptation field exist 1 1 means presence of the adaptation field
Payload data exist 1 1 means presence of data
Continuity counter 4
Note: the total number of bits above is 32 and is called the transport stream 4-byte prefix.
Adaptation field 0 or more Depends on flags
Payload Data 0 or more Depends on flags

A packet is the basic unit of data in a transport stream. It consists of a sync byte, whose value is 0x47, followed by three one-bit flags and a 13-bit Packet Identifier (PID). This is followed by a 4-bit continuity counter. Additional optional transport fields, as signaled in the optional adaptation field, may follow. The rest of the packet consists of payload. Packets are 188 bytes in length[4] , but the communication medium may add some error correction bytes to the packet. DVB-T/C/S uses 204 bytes and ATSC 8-VSB, 208 bytes as the size of emission packets (transport stream packet + FEC data). ATSC transmission adds 20 bytes of Reed-Solomon forward error correction to create a packet that is 208 bytes long [5]. The 188-byte packet size was originally chosen for compatibility with ATM systems [6][7].

Adaptation Field Format
Name Number
of bits
Description
Adaptation Field Length 8 Number of bytes in the adaptation field immediately following this byte
Discontinuity indicator 1 Set to 1 if a discontinuity occurred in the continuity counter of the TS packet
Random Access indicator 1 Set to 1 if the PES packet in this TS packet starts a video/audio sequence
Elementary stream priority indicator 1 1 = higher priority
PCR flag 1 1 means adaptation field does contain a PCR field
OPCR flag 1 1 means adaptation field does contain a OPCR field
Splicing point flag 1 1 means presence of splice countdown field in adaptation field
Transport private data flag 1 1 means presence of private data bytes in adaptation field
Adaptation field extension flag 1 1 means presence of adaptation field extension
Below fields are optional variable Depends on flags
PCR 33+9 Program clock reference
OPCR 33+9 Original Program clock reference. Helps when one TS is copied into another
Splice countdown 8 Indicates how many TS packets from this one a splicing point occurs (may be negative)
stuffing bytes variable

PID

Each table or elementary stream in a transport stream is identified by a 13-bit packet ID (PID). A demultiplexer extracts elementary streams from the transport stream in part by looking for packets identified by the same PID. In most applications, Time-division multiplexing will be used to decide how often a particular PID appears in the transport stream.

Programs

Transport stream has a concept of programs. Each single program is described by a Program Map Table (PMT) which has a unique PID, and the elementary streams associated with that program have PIDs listed in the PMT. For instance, a transport stream used in digital television might contain three programs, to represent three television channels. Suppose each channel consists of one video stream, one or two audio streams, and any necessary metadata. A receiver wishing to decode a particular "channel" merely has to decode the payloads of each PID associated with its program. It can discard the contents of all other PIDs. A transport stream with more than one program is referred to as MPTS - Multi Program Transport Stream. A single program transport stream is referred to as SPTS.

Program Specific Information (PSI)

There are 4 PSI tables: Program Association (PAT), Program Map (PMT), Conditional Access (CAT), and Network Information (NIT). The MPEG-2 specification does not specify the format of the CAT and NIT.

PAT

PAT stands for Program Association Table. It lists all programs available in the transport stream. Each of the listed programs is identified by a 16-bit value called program_number. Each of the programs listed in PAT has an associated value of PID for its Program Map Table (PMT).

The value 0x0000 of program_number is reserved to specify the PID where to look for Network Information Table (NIT). If such a program is not present in PAT the default PID value (0x0010) shall be used for NIT.

TS Packets containing PAT information always have PID 0x0000.

PMT

Program Map Tables (PMTs) contain information about programs. For each program, there is one PMT. While the MPEG-2 standard permits more than one PMT section to be transmitted on a single PID, most MPEG-2 "users" such as ATSC and SCTE require each PMT to be transmitted on a separate PID that is not used for any other packets. The PMTs provide information on each program present in the transport stream, including the program_number, and list the elementary streams that comprise the described MPEG-2 program. There are also locations for optional descriptors that describe the entire MPEG-2 program, as well as an optional descriptor for each elementary stream. Each elementary stream is labeled with a stream_type value.

PCR

To enable a decoder to present synchronized content, such as audio tracks matching the associated video, at least once each 100 ms a Program Clock Reference, or PCR is transmitted in the adaptation field of an MPEG-2 transport stream packet. The PID with the PCR for an MPEG-2 program is identified by the pcr_pid value in the associated Program Map Table. The value of the PCR, when properly used, is employed to generate a system_timing_clock in the decoder. The STC decoder, when properly implemented, provides a highly accurate time base that is used to synchronize audio and video elementary streams. Timing in MPEG2 references this clock, for example the presentation time stamp (PTS) is intended to be relative to the PCR. The first 33 bits are based on a 90kHz clock. The last 9 are based on a 27MHz clock. The maximum jitter permitted for the PCR is +/- 500 ns.

Null packets

Some transmission schemes, such as those in ATSC and DVB, impose strict constant bitrate requirements on the transport stream. In order to ensure that the stream maintains a constant bitrate, a Multiplexer may need to insert some additional packets. The PID 0x1FFF is reserved for this purpose. The payload of null packets may not contain any data at all, and the receiver is expected to ignore its contents.

Modifications of transport stream specification for random-access media (M2TS)

Timecode

Transport Stream was designed for tape and broadcast, but it required modifications for usage with random-access media devices like new generation of digital camcorders that record onto DVD disks, Blu-ray disks, hard drives or solid-state memory cards.

Random-access based systems may save data packets into a temporary buffer if a storage device is not ready, for example on device startup. Packets are written out of order, and to keep track of them, a 4-byte timecode (TC) is added to standard 188-byte packets. The result is a 192-byte packet.[8][9] This is what is informally called M2TS stream. Blu-ray Disc Association calls it "BDAV MPEG-2 transport stream".[8] JVC called it TOD (possibly an abbreviation for "Transport stream on disc") when used in HDD-based camcorders like GZ-HD7.[10][11] M2TS transport stream is also used for AVCHD video files, which often have MTS extension.[12]

Filename extension .m2ts is used on Blu-ray Disc Video for files which contain BDAV MPEG-2 transport stream.[8][13] Blu-ray Disc Video titles authored with menu support are in the BDMV (Blu-ray Disc Movie) format and contain audio, video, and other streams in BDAV container, which is based on the MPEG-2 transport stream format.[14][15] Blu-ray employs the MPEG-2 transport stream recording method. That enables transport streams of digital broadcasts to be recorded as they are without altering the format.[9] It also enables flexible editing of a digital broadcast that is recorded as is and where the data can be edited just by rewriting the playback stream. Although it is quite natural, a function for high-speed and easy-to use retrieval is built in.[16][9] Blu-ray Disc Video use MPEG-2 transport streams, compared to DVD's program streams. This allows multiple video programs to be stored in the same file so they can be played back simultaneously (e.g. with "Picture in picture" effect).

Programs that open TS files

Multiple OS

Linux

Windows

Mac OS X

See also

References

  1. ^ http://neuron2.net/library/mpeg2/iso13818-1.pdf
  2. ^ TSReader Support
  3. ^ DVB scrambling control bits defined. Page 6
  4. ^ ISO/IEC 13818-1 Second edition. 2000-12-01. p. xi or 11 according to PDF viewer. http://neuron2.net/library/mpeg2/iso13818-1.pdf. 
  5. ^ ATSC transmission
  6. ^ MPEG Systems FAQ
  7. ^ Tektronix: Products > ATSC MPEG Transport Stream Monitor - AT970: Characteristics/Specs
  8. ^ a b c Blu-ray Disc Association (March 2005) BD ROM - Audio Visual Application Format Specifications (PDF) Page 15, Retrieved on 2009-07-26
  9. ^ a b c Blu-ray Disc Association (March 2008) BD-RE - Audiovisual Application Format Specification for BD-RE 2.1 (PDF), Technical White Papers - BD RE, Retrieved on 2009-07-28
  10. ^ "Steve Mullen, M2TS primer". http://dvinfo.net/conf/showthread.php?t=105486. 
  11. ^ Working with JVC Everio MOD & TOD files, Retrieved on 2009-07-27
  12. ^ Backing up AVCHD video onto DVDs and playing them on a Blu-ray player, Retrieved on 2009-07-27
  13. ^ Videohelp.com What is Blu-ray Disc and HD DVD?, Retrieved on 2009-07-26
  14. ^ AfterDawn.com Glossary - BD-MV (Blu-ray Movie) and BDAV container, Retrieved on 2009-07-26
  15. ^ AfterDawn.com Glossary - BDAV container, Retrieved on 2009-07-26
  16. ^ Blu-ray Disc Association (August 2004) Blu-ray Disc Format, White paper (PDF) Page 22, Retrieved on 2009-07-28
  17. ^ http://www.mplayerhq.hu/
  18. ^ http://www.videolan.org/vlc/
  19. ^ http://www.avalpa.com/the-key-values/15-free-software/33-opencaster
  20. ^ http://github.com/nexgenta/opencaster
  21. ^ http://cccp-project.net
  22. ^ a b http://www.squared5.com
  23. ^ "MAC TS converter". http://www.ifunia.com/how-tos/how-to-use-mac-ts-converter-to-convert-ts-to-mp4-on-mac.html. 

External links


Advertisements






Got something to say? Make a comment.
Your name
Your email address
Message