The Full Wiki

Methyldichloroarsine: Wikis

  

Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.

Did you know ...


More interesting facts on Methyldichloroarsine

Include this on your site/blog:

Encyclopedia

From Wikipedia, the free encyclopedia

Methyldichloroarsine
MD.png
IUPAC name
Abbreviations MD
Identifiers
CAS number 593-89-5
Properties
Molecular formula CH3AsCl2
Molar mass 160.86 g/mol
Appearance Colorless liquid
Density 1.836 g/cm3
Melting point

−55°C

Boiling point

133°C

Hazards
Main hazards Highly toxic, Irritant
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa)
Infobox references

Methyldichloroarsine, sometimes abbreviated "MD", is a organoarsenic compound with the formula CH3AsCl2. This colourless volatile liquid is a highly toxic vesicant that has been used in chemical warfare.[1]

Contents

History

German chemists weaponized the methyldichloroarsine, during World War I between 1917 and 1918, it was the first organoarsenic compound to be weaponized.[2]

Structure, synthesis, reactivity

Focusing on the arsenic center, the molecule is pyramidal with the Cl-As-Cl and C-As-Cl angles approaching 90° (see image). Virtually all related arsenic(III) compounds adopt similar structures.

Methyldichloroarsine is produced by the reaction of methylmagnesium chloride and arsenic trichloride:[3]

AsCl3 + CH3MgCl → CH3AsCl2 + MgCl2

Typically such syntheses are conducted in ether or THF solutions and typically the product is isolated by distillation. Use of larger amounts of the magnesium reagent affords greater amounts of dimethylchloroarsine ((CH3)2AsCl) and trimethylarsine ((CH3)3As).

In World War I, the german manufacturing method consisted of a three-step reaction beginning with methylation of sodium arsenite:

2 Na3AsO3 + (CH3O)2SO2 → 2 CH3AsO(ONa)2 + Na2SO4,

followed by reduction of the disodium monomethylarsonate with sulfur dioxide:

CH3AsO(ONa)2 + SO2 → CH3AsO + Na2SO4,

subsequently reacting the monomethylarsine oxide thus formed with hydrogen chloride to yield methyldichloroarsine:[4]

CH3AsO + 2 HCl → CH3AsCl2 + H2O

The As-Cl bonds in MD are susceptible toward nucleophilic attack. Reduction of MD with sodium metal affords the polymer [CH3As]n.

Use as a weapon

Methyldichloroarsine's only documented large-scale use is as a chemical weapon.

Symptoms of poisoning

Although some of its symptoms resemble those from poison ivy, other symptoms include irritation to the eyes and to the nose, although blistering may be delayed for hours.[1][5] Other symptoms include: dermal burns with vesicle formation; blepharospasm and photophobia. Convulsions, abdominal pain, coughing, and shortness of breath with damage to the respiratory system can be delayed for about three to five days; hemolysis can also occur.[1][6]

MD is not persistent, meaning that it will dissipate after a short time.[5] It is, however, still quite lethal. The LCt/50 for MD is about 3,000 mg/min.[5]

Protection

Besides avoiding situations in which it might be used, an activated charcoal filter and a protective mask can help protect against MD.[1] It should, however, be noted that MD can penetrate rubber, so some masks and clothing are ineffective.[3] Other protective clothing, such as full body protection, are useful as well. Among the agents useful for decontamination of MD are bleach and caustic soda.[5]

See also

References








Got something to say? Make a comment.
Your name
Your email address
Message