The Full Wiki



More info on Northam Bridge

Northam Bridge: Wikis

  
  

Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.

Did you know ...


More interesting facts on Northam Bridge

Include this on your site/blog:

Encyclopedia

Updated live from Wikipedia, last check: June 04, 2012 22:01 UTC (54 seconds ago)

From Wikipedia, the free encyclopedia

Northam Bridge
The bridge from the eastern (Bitterne Manor) bank
Carries 4 lanes (road)
Crosses River Itchen
Locale Northam, Bitterne Manor (both in Southampton)
Maintained by Southampton City Council
Total length 148 metres (485 ft 7 in)
Width 13.5 metres (44 ft 3 in)
Longest span 32 metres (104 ft 12 in)
Vertical clearance open
Clearance below 9.2 metres (30 ft 2 in)
Beginning date of construction 1796 (original);
1954 (current)
Completion date 1799 (original);
1954 (current)
Opened 1799 (original);
1954 (current)
Coordinates 50°54′54″N 1°23′10″W / 50.915°N -1.386°E / 50.915; -1.386Coordinates: 50°54′54″N 1°23′10″W / 50.915°N -1.386°E / 50.915; -1.386

Coordinates: 50°54′54″N 1°23′10″W / 50.915°N 1.386°W / 50.915; -1.386 The Northam Bridge is a road bridge across the River Itchen in Southampton, England, linking the suburbs of Northam and Bitterne Manor. The current bridge was the first major prestressed concrete road bridge to be built in the United Kingdom.[1] The bridge carries the A3024 road as a dual carriageway, with two lanes on each carriageway.

History

Prior to the construction of the Northam Bridge, the southernmost bridge across the River Itchen was at Mansbridge.[2] Mansbridge was the lowest crossing point of the river until the early 18th century, when the Itchen Ferry began operating between Woolston and St Mary's, downriver of Northam.[2]

The Northam Bridge was the brainchild of David Lance, who acquired land in Bitterne and built Chessel House there in 1796.[2] Realising that access to his land was poor, he encouraged the building of a bridge linking Bitterne Manor to Northam, together with roads from the bridge to Botley and a further bridge over the River Hamble in Bursledon (and onwards to Portsmouth), with the fork between the Bursledon and Botley roads passing close to Chessel House.[2] The Northam Bridge Company was formed in 1796, funded mainly by Portsmouth businessmen.[2]

The new route between Portsmouth and Southampton would be four miles (6 km) shorter than travelling via Mansbridge, and as a result the proposal to improve transport between the two important port cities was keenly supported by the Admiralty, especially since this was the time of the Napoleonic Wars.[2] Consequently when the Northam Bridge Company sought an Act of Parliament to build a bridge, the Act was passed quickly.[2]

The new roads and bridges were built in 1799, and were originally operated as toll roads. The first Northam Bridge was of wooden construction.[2] The wooden bridge was replaced in 1889 by an iron bridge.[3]

The bridge remained a toll bridge until 1929[3] when the ownership was transferred from the private sector to the Southampton Corporation. [4] It was this change of ownership that allowed the first bus route across the River Itchen to be established in Southampton; Southampton Corporation decided against extending the existing tram lines across the bridge, opting instead to establish a double-decker bus service.[4]

The iron bridge was replaced in 1954 with a third bridge, made of prestressed concrete, and it is this bridge that still stands today.[3][1] The third Northam Bridge was the first major prestressed concrete road bridge to be built in the UK.[1]

Construction and dimensions

The third bridge utilised the latest technology available at the time but the style of the bridge was of the pre-war era.[5] The main deck structure has transverse diaphragms and narrowly spaced beams, which were pre-cast on site using deflected cables.[5] Pre-cast, pre-stressed slabs, known as junction slabs or continuity slabs, were placed between the tops of the beams by transverse stressing over a length where the flanges of the tees were removed.[5] These, together with in situ diaphragms between the ends of the beams, allowed the deck structure to be made continuous for live and superimposed loads.[5] After the junction slabs were in place, the main beams were post-tensioned through the diaphragms.[5]

At mid-span, the bridge is 44 feet 4 inches (13.5 m) wide[5], 4.7 metres above mean high water springs and 9.2 metres above chart datum.[6] The bridge is 148 metres long in total, and the supporting piers are up to 32 metres apart.[7]

References








Got something to say? Make a comment.
Your name
Your email address
Message
Please enter the solution to case below
12+8=