Numeral systems by culture  

HinduArabic numerals  
Eastern Arabic Indian family Khmer 
Mongolian Thai Western Arabic 
East Asian numerals  
Chinese Counting rods Japanese 
Korean Suzhou Vietnamese 
Alphabetic numerals  
Abjad Armenian Āryabhaṭa Cyrillic 
Ge'ez Greek (Ionian) Hebrew 
Other systems  
Attic Babylonian Brahmi Egyptian Etruscan Inuit 
Mayan Quipu Roman Urnfield 
List of numeral system topics  
Positional systems by base  
Decimal (10)  
1, 2, 3, 4, 5, 8, 12, 16, 20, 60 more…  
A numeral system (or system of numeration) is a writing system for expressing numbers, that is a mathematical notation for representing numbers of a given set, using graphemes or symbols in a consistent manner. It can be seen as the context that allows the numerals "11" to be interpreted as the binary symbol for three, the decimal symbol for eleven, or as other numbers in different bases.
Ideally, a numeral system will:
For example, the usual decimal representation of whole numbers gives every whole number a unique representation as a finite sequence of digits. However, when decimal representation is used for the rational or real numbers, the representation may not be unique: many rational numbers have two numerals, a standard one that terminates, such as 2.31, and another that recurs, such as 2.309999999... . Numerals which terminate have no nonzero digits after a given position. For example, numerals like 2.31 and 2.310 are taken to be the same, except for some scientific contexts where greater precision is implied by the trailing zero.
Numeral systems are sometimes called number systems, but that name is misleading, as it could refer to different systems of numbers, such as the system of real numbers, the system of complex numbers, the system of padic numbers, etc. Such systems are not the topic of this article.
Contents 
The most commonly used system of numerals is known as HinduArabic numerals, and two Indian mathematicians are credited with developing them. Aryabhatta of Kusumapura who lived during the 5th century developed the place value notation and Brahmagupta a century later introduced the symbol zero.^{[1]}
The simplest numeral system is the unary numeral system, in which every natural number is represented by a corresponding number of symbols. If the symbol / is chosen, for example, then the number seven would be represented by ///////. Tally marks represent one such system still in common use. The unary system is only useful for small numbers, although it plays an important role in theoretical computer science. Elias gamma coding, which is commonly used in data compression, expresses arbitrarysized numbers by using unary to indicate the length of a binary numeral.
The unary notation can be abbreviated by introducing different symbols for certain new values. Very commonly, these values are powers of 10; so for instance, if / stands for one,  for ten and + for 100, then the number 304 can be compactly represented as +++ //// and the number 123 as +   /// without any need for zero. This is called signvalue notation. The ancient Egyptian numeral system was of this type, and the Roman numeral system was a modification of this idea.
More useful still are systems which employ special abbreviations for repetitions of symbols; for example, using the first nine letters of our alphabet for these abbreviations, with A standing for "one occurrence", B "two occurrences", and so on, we could then write C+ D/ for the number 304. The number system of the English language is of this type ("three hundred [and] four"), as are those of other spoken languages, regardless of what written systems they have adopted. However many languages use mixtures of bases, and other features, for instance 79 in French is soixante dixneuf (60+10+9) and in Welsh is pedwar ar bymtheg a thrigain (4+(5+10)+(3 x 20)) or (somewhat archaic) pedwar ugain namyn un (4 x 20  1)
More elegant is a positional system, also known as placevalue notation. Again working in base 10, we use ten different digits 0, ..., 9 and use the position of a digit to signify the power of ten that the digit is to be multiplied with, as in 304 = 3×100 + 0×10 + 4×1. Note that zero, which is not needed in the other systems, is of crucial importance here, in order to be able to "skip" a power. The HinduArabic numeral system, which originated in India and is now used throughout the world, is a positional base 10 system.
Arithmetic is much easier in positional systems than in the earlier additive ones; furthermore, additive systems need a large number of different symbols for the different powers of 10; a positional system needs only 10 different symbols (assuming that it uses base 10).
The numerals used when writing numbers with digits or symbols can be divided into two types that might be called the arithmetic numerals 0,1,2,3,4,5,6,7,8,9 and the geometric numerals 1,10,100,1000,10000... respectively. The signvalue systems use only the geometric numerals and the positional systems use only the arithmetic numerals. The signvalue system does not need arithmetic numerals because they are made by repetition (except for the Ionic system), and the positional system does not need geometric numerals because they are made by position. However, the spoken language uses both arithmetic and geometric numerals.
In certain areas of computer science, a modified basek positional system is used, called bijective numeration, with digits 1, 2, ..., k (k ≥ 1), and zero being represented by an empty string. This establishes a bijection between the set of all such digitstrings and the set of nonnegative integers, avoiding the nonuniqueness caused by leading zeros. Bijective basek numeration is also called kadic notation, not to be confused with padic numbers. Bijective base1 is the same as unary.
In a positional baseb numeral system (with b a positive natural number known as the radix), b basic symbols (or digits) corresponding to the first b natural numbers including zero are used. To generate the rest of the numerals, the position of the symbol in the figure is used. The symbol in the last position has its own value, and as it moves to the left its value is multiplied by b.
For example, in the decimal system (base 10), the numeral 4327 means (4×10^{3}) + (3×10^{2}) + (2×10^{1}) + (7×10^{0}), noting that 10^{0} = 1.
In general, if b is the base, we write a number in the numeral system of base b by expressing it in the form a_{n}b^{n} + a_{n − 1}b^{n − 1} + a_{n − 2}b^{n − 2} + ... + a_{0}b^{0} and writing the enumerated digits a_{n}a_{n − 1}a_{n − 2} ... a_{0} in descending order. The digits are natural numbers between 0 and b − 1, inclusive.
If a text (such as this one) discusses multiple bases, and if ambiguity exists, the base (itself represented in base 10) is added in subscript to the right of the number, like this: number_{base}. Unless specified by context, numbers without subscript are considered to be decimal.
By using a dot to divide the digits into two groups, one can also write fractions in the positional system. For example, the base2 numeral 10.11 denotes 1×2^{1} + 0×2^{0} + 1×2^{−1} + 1×2^{−2} = 2.75.
In general, numbers in the base b system are of the form:
The numbers b^{k} and b^{−k} are the weights of the corresponding digits. The position k is the logarithm of the corresponding weight w, that is k = log_{b}w = log_{b}b^{k}. The highest used position is close to the order of magnitude of the number.
The number of tally marks required in the unary numeral system for describing the weight would have been w. In the positional system the number of digits required to describe it is only k + 1 = log_{b}w + 1, for . E.g. to describe the weight 1000 then four digits are needed since log_{10}1000 + 1 = 3 + 1. The number of digits required to describe the position is log_{b}k + 1 = log_{b}log_{b}w + 1 (in positions 1, 10, 100... only for simplicity in the decimal example).
Position  3  2  1  0  1  2  ... 

Weight  b^{3}  b^{2}  b^{1}  b^{0}  b ^{− 1}  b ^{− 2}  ... 
Digit  a_{3}  a_{2}  a_{1}  a_{0}  c_{1}  c_{2}  ... 
Decimal example weight  1000  100  10  1  0.1  0.01  ... 
Decimal example digit  4  3  2  7  0  0  ... 
Note that a number has a terminating or repeating expansion if and only if it is rational; this does not depend on the base. A number that terminates in one base may repeat in another (thus 0.3_{10} = 0.0100110011001..._{2}). An irrational number stays unperiodic (infinite amount of unrepeating digits) in all integral bases. Thus, for example in base 2, π = 3.1415926..._{10} can be written down as the unperiodic 11.001001000011111..._{2}.
Putting overscores, n, or dots, ^{•}n, above the common digits is a convention used to represent repeating rational expansions. Thus:
If b = p is a prime number, one can define basep numerals whose expansion to the left never stops; these are called the padic numbers.
More general is using a notation (here written littleendian) like a_{0}a_{1}a_{2} for a_{0} + a_{1}b_{1} + a_{2}b_{1}b_{2}, etc.
This is used in punycode, one aspect of which is the representation of a sequence of nonnegative integers of arbitrary size in the form of a sequence without delimiters, of "digits" from a collection of 36: az and 09, representing 025 and 2635 respectively. A digit lower than a threshold value marks that it is the mostsignificant digit, hence the end of the number. The threshold value depends on the position in the number. For example, if the threshold value for the first digit is b (i.e. 1) then a (i.e. 0) marks the end of the number (it has just one digit), so in numbers of more than one digit the range is only b9 (135), therefore the weight b_{1} is 35 instead of 36. Suppose the threshold values for the second and third digit are c (2), then the third digit has a weight 34 × 35 = 1190 and we have the following sequence:
a (0), ba (1), ca (2), .., 9a (35), bb (36), cb (37), .., 9b (70), bca (71), .., 99a (1260), bcb (1261), etc.
Unlike a regular based numeral system, we have numbers like 9b where 9 and b each represent 35; yet the representation is unique because ac and aca are not allowed  the a would terminate the number.
The flexibility in choosing threshold values allows optimization depending on the frequency of occurrence of numbers of various sizes.
The case with all threshold values equal to 1 corresponds to bijective numeration, where the zeros correspond to separators of numbers with digits which are nonzero.
Numeral systems by culture  

HinduArabic numerals  
Western Arabic Eastern Arabic Khmer  Indian family Brahmi Thai 
East Asian numerals  
Chinese Suzhou Counting rods  Japanese Korean 
Alphabetic numerals  
Abjad Armenian Cyrillic Ge'ez  Hebrew Greek (Ionian) Āryabhaṭa 
Other systems  
Attic Babylonian Egyptian Etruscan  Mayan Roman Urnfield 
List of numeral system topics  
Positional systems by base  
Decimal (10)  
2, 4, 8, 16, 32, 64  
1, 3, 9, 12, 20, 24, 30, 36, 60, more…  
A numeral system (or system of numeration) is a framework where a set of numbers are represented by numerals in a consistent manner. It can be seen as the context that allows the numeral "11" to be interpreted as the binary numeral for three, the decimal numeral for eleven, or other numbers in different bases.
A numeral is a symbol or group of symbols, or a word in a natural language that represents a number. Numerals differ from numbers just as words differ from the things they refer to. The symbols "11", "eleven" and "XI" are different numerals, all representing the same number. This article attempts to explain the various systems of numerals. See also number names.
There are different symbols, that can be used to make numbers. In a system with base 10 (the normal decimal system), usually the symbols 0,1,2, 3, 4, 5,6, 7, 8, and 9 are used. The numbers 0 to 9 can be written as one symbol, 0..9. To count past 9, symbols have to be put together. 10 can be seen as 1 times 10^{1} plus 0 times 10^{0}. With a base of 2, only the symbols 0 and 1 are used. 10 in base 2 notation is therefore 1 times 2^{1} plus 0 times 2^{0}. This is the same as 2, in the base 10 notation.
For bases bigger than 10, capital letters are used as symbols. For example, the hexadecimal numeral system (base 16) uses the numerical digits 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F.
Today, mainly bases 2, 8, 10, 12 and 16 are in use.
Most calculations are done in binary (base 2), although most people do calculations in decimal (base ten).
