The Full Wiki

Pelikan tail: Wikis

Advertisements
  
  

Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.

Encyclopedia

From Wikipedia, the free encyclopedia

Pelikan tail design

The Pelikan tail is an experimental tail design for fighter jets. Originally conceived by Ralph Pelikan,[1] who was hired by McDonnell Aircraft, later worked for McDonnell Douglas and after another merger, retired from Boeing. His design has not to date been incorporated into any publicly available jets. However, it has been considered or included in design specifications in the original Boeing X-32 fighter design. [2]

Contents

Advantages and disadvantages

The Pelikan design differs from the traditional elevator-and-rudder design in that it uses only two control surfaces in order to achieve control of pitch, yaw, and roll. When evaluated by Boeing engineers in October 1998, they found advantages of greater pitch control at high angles of attack and that two tails would have a lower radar signature than four.[1][2] However, they also found that using two larger control surfaces instead of four, might actually make the plane end up heavier. The bigger hydraulic pumps and cylinders needed to operate the larger surfaces would add 800 to 900 pounds (360 to 410 kg) of weight to the design.[1] This, and other factors made them use a four-post tail instead.[1]

Tests by Virginia Tech students

Virginia Tech students built a Pelikan tail model and got positive results for its viability using a wind tunnel.[3] The analysis by the students found several advantages like a lower vertical surface area, which aids in stealth; less drag due to skin friction; and a lower weight due to the need for two as opposed to the usual four hydraulic actuators.[4]

See also

References

Advertisements

Advertisements






Got something to say? Make a comment.
Your name
Your email address
Message