The Full Wiki

Pratt & Whitney J75: Wikis


Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.


From Wikipedia, the free encyclopedia

J75 / JT4A
Part of a Pratt & Whitney J75 from a downed Lockheed U-2 in Cuba
Type Turbojet
National origin United States
Manufacturer Pratt & Whitney
First run 1950s
Major applications Boeing 707
F-105 Thunderchief
F-106 Delta Dart
Lockheed U-2
Developed from Pratt & Whitney J57
Developed into Pratt & Whitney GG4/FT4

The Pratt & Whitney J75 (company designation: JT4A) was an axial-flow turbojet engine first flown in 1955. A two-spool design in the 17,000 lbf (76 kN) thrust class, the J75 was essentially the bigger brother of the Pratt & Whitney J57 (JT3C). It was known in civilian service as the JT4A, and in a variety of stationary roles as the GG4 and FT4.


Design and development

In military use, the J75 was used on the Lockheed U-2, the Republic Aviation F-105 Thunderchief, and the Convair F-106 Delta Dart. It was also utilized in the prototype and experimental Lockheed A-12, North American YF-107, Vought XF8U-3 Crusader III, P6M SeaMaster, and CF-105 Arrow.

Before the arrival of the Pratt & Whitney JT3D turbofan engine, the JT4A was used to power certain Boeing 707 and Douglas DC-8 models. It brought improved field performance in the medium-range Boeing 707-220 and Douglas DC-8-20, and gave intercontinental range in the original Boeing 707-320 and the Douglas DC-8-30.

After its relatively short lifetime in the aircraft role, the JT4 found more enduring use in the naval role, where the FT4 was produced in a variety of models between 18,000 and 22,000 hp. Well-known uses include the first all-turbine warships, the Canadian Iroquois class destroyers, as well as the United States Coast Guard's Hamilton class cutters, and it was considered for the US Navy's Asheville class gunboat. The same basic powerplant saw much wider use as a peak demand power turbine running on natural gas. From its introduction in 1960 over 1,000 FT4s have been sold, with many of them still in operation for electrical generation. Outdated by modern standards, refits are available that add catalytic converters to lower their emissions.


  • J75-P-3: 16,470 lbf (73.3 kN) thrust
  • J75-P-5: 17,200 lbf (76.5 kN) thrust
  • J75-P-13B: 17,000 lbf (75.6 kN) thrust
  • J75-P-15W: 24,500 lbf (109 kN) afterburning thrust
  • J75-P-17: 24,500 lbf (109 kN) afterburning thrust
  • J75-P-19W: 17,200 lbf (76.5 kN) thrust


A US Navy J75 used in the P6M Seamaster

Specifications (J75)

See also

Related development

Related lists


External links



Got something to say? Make a comment.
Your name
Your email address