The Full Wiki

More info on Pulmonary wedge pressure

Pulmonary wedge pressure: Wikis

Advertisements
  

Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.

Encyclopedia

From Wikipedia, the free encyclopedia

Diagram of Pulmonary artery catheter

The Pulmonary wedge pressure (PWP)[1] (also commonly known as a Pulmonary capillary wedge pressure or PCWP, or Pulmonary artery occlusion pressure or PAOP), as measured by a pulmonary artery catheter, is the pressure measured in a pulmonary artery distal to an occlusion of that artery. Physiologically, distinctions can be drawn among pulmonary venous pressure, pulmonary artery pressure, pulmonary wedge pressure, and left atrial pressure, but not all of these can be measured in a clinical context.[2]

Noninvasive estimation techniques have been proposed.[3]

How is it measured?

PCWP is measured by inserting a balloon-tipped, multi-lumen catheter (Swan-Ganz catheter) into a peripheral vein, then advancing the catheter into the right atrium, right ventricle, pulmonary artery, and then into a branch of the pulmonary artery. Just behind the tip of the catheter is a small balloon that can be inflated with air (~1 cc). The catheter has one opening (port) at the tip (distal to the balloon) and a second port several centimeters proximal to the balloon. These ports are connected to pressure transducers. When properly positioned in a branch of the pulmonary artery, the distal port measures pulmonary artery pressure (~ 25/10 mmHg) and the proximal port measures right atrial pressure (~ 0-3 mmHg). The balloon is then inflated, which occludes the branch of the pulmonary artery. When this occurs, the pressure in the distal port rapidly falls, and after several seconds, reaches a stable lower value that is very similar to left atrial pressure (LAP, normally about 8-10 mmHg). The balloon is then deflated. The same catheter can be used to measure cardiac output by the thermodilution technique.

The pressure recorded during balloon inflation is similar to LAP because the occluded vessel, along with its distal branches that eventually form the pulmonary veins, acts as a long catheter that measures the blood pressures within the pulmonary veins and left atrium.

Why is it measured?

It is important to measure PCWP to diagnose the severity of left ventricular failure and to quantify the degree of mitral valve stenosis. Both of these conditions elevate LAP and therefore PCWP. These pressures are normally 8-10 mmHg. Aortic valve stenosis and regurgitation, and mitral regurgitation also elevate LAP. When these pressures are above 20 mmHg, pulmonary edema is likely to be present, which is a life-threatening condition. Note that LAP is the outflow or venous pressure for the pulmonary circulation and increases in LAP are transmitted almost fully back to the pulmonary capillaries thereby increasing their filtration of fluid. By measuring PCWP, the physician can titrate the dose of diuretic drugs and other drugs that are used to reduce pulmonary venous and capillary pressure, and thereby reduce the pulmonary edema. Therefore, measurement of PCWP can help guide therapeutic efficacy.

PCWP is also necessary to measure when evaluating pulmonary hypertension. Pulmonary hypertension is often caused by increased pulmonary vascular resistance. To calculate this, pulmonary blood flow (usually measured by the thermodilution technique), pulmonary artery pressure and pulmonary venous pressure (PCWP) measurements are required. Pulmonary hypertension can also result from increases in pulmonary venous pressure and pulmonary blood volume secondary to left ventricular failure or mitral or aortic valve disease.

PCWP is also useful in evaluating blood volume status when fluids are administered during hypotensive shock. One practice is to administer fluids at a rate that maintains PCWP between 12-14 mmHg.

Clinical significance

Because of the large compliance of the pulmonary circulation, it provides an indirect measure of the left atrial pressure.[4 ]

For example, it is considered the gold standard for determining the cause of acute pulmonary edema; this is likely to be present at a PWP of >20mmHg. It has also been used to diagnose severity of left ventricular failure and mitral stenosis[5]

Physiological pressure: 6-12 mm Hg.[6] wedge pressure: blood pressure measured by a small catheter wedged into a vessel, occluding it,

References

External links

Advertisements

Advertisements






Got something to say? Make a comment.
Your name
Your email address
Message