The Full Wiki

Reinforced carbon-carbon: Wikis


Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.


From Wikipedia, the free encyclopedia

Pieces of reinforced carbon-carbon taken from the right leading edge of the early Shuttle prototype Space Shuttle Enterprise, showing brittle failure of C/C due to foam impact reproducing a possible event during Columbia's final launch.

Carbon fibre-reinforced carbon (aka carbon-carbon, abbreviated C/C) is a composite material consisting of carbon fibre reinforcement in a matrix of graphite. It was developed for the nose cones of intercontinental ballistic missiles, and is most widely known as the material for the nose cone and wing leading edges of the Space Shuttle. The Brabham team pioneered its use in the brake systems of Formula One racing cars in 1976; carbon-carbon brake discs and pads are now a standard component of Formula One brake systems.

Carbon-carbon is well-suited to structural applications at high temperatures, or where thermal shock resistance and/or a low coefficient of thermal expansion is needed. While it is less brittle than many other ceramics, it lacks impact resistance; Space Shuttle Columbia was destroyed after one of its RCC panels was broken by the impact of a piece of foam insulation from the Space Shuttle External Tank. This catastrophic failure was due in part to original shuttle design requirements which did not consider the likelihood of such violent impacts.



The brake disc of this Ferrari race car's braking system is made from carbon fibre-reinforced silicon carbide

The material is made in three stages:

First, material is laid up in its intended final shape, with carbon filament and/or cloth surrounded by an organic binder such as plastic or pitch. Often, coke or some other fine carbon aggregate is added to the binder mixture.

Second, the lay-up is heated, so that pyrolysis transforms the binder to relatively pure carbon. The binder loses volume in the process, so that voids form; the addition of aggregate reduces this problem, but does not eliminate it.

Third, the voids are gradually filled by forcing a carbon-forming gas such as acetylene through the material at a high temperature, over the course of several days. This long heat treatment process also allows the carbon to form into larger graphite crystals, and is the major reason for the material's high cost, exceeding $100,000 per panel.

C/C is a generally hard material that can be made highly resistant to thermal expansion, temperature gradients, and thermal cycling, depending on how the fibre scaffold is laid up and the quality/density of the matrix filler.

Mechanical properties

The strength of carbon-carbon with unidirectional reinforcement fibres is up to 700MPa. Carbon-carbon materials retain their properties above 2000°C. [1]

Similar products

Carbon fibre-reinforced silicon carbide (C/SiC) is a development of pure carbon-carbon, and can be used in automotive applications, such as components of brake systems on high performance road cars, namely the brake disc and brake pads.

C/SiC utilises silicon carbide with carbon fibre, and this compound has a huge advantage in durability over pure carbon-carbon. On a typical road car, the brake discs are claimed to have a quadrupled lifespan compared to the conventional grey cast iron (GG-20) discs, with an estimated potential duration of up to 300,000 kilometers or 185,000 miles - whereas pure carbon-carbon discs on a Formula One car may be completely worn out in as little as 200 miles.

Applications initially included the Porsche Carrera GT, and are standard fitment on the Bugatti Veyron and certain current Bentleys, Ferraris and Lamborghinis. They are also offered as an "optional upgrade" on certain high performance Audi cars, including the D3 S8, B7 RS4, C6 S6 and RS6, and the R8.

Carbon brakes became widely available for commercial airplanes in the 1980s[2].

See also




Got something to say? Make a comment.
Your name
Your email address