Riverboat: Wikis

Advertisements
  
  
  

Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.

Did you know ...


More interesting facts on Riverboat

Include this on your site/blog:

Encyclopedia

From Wikipedia, the free encyclopedia

Passenger ship on the river Rhine
Riverboat with capacity for 500 TEU

A riverboat is a ship designed for inland navigation. These vessels are usually less sturdy than ships built for the open seas, with limited navigational and rescue equipment, as they do not have to survive the high winds or large waves characteristic on large lakes, seas or oceans. They can therefore be built from steel as well as from composite materials. Although steel is stronger, composite materials can decrease weight by up to 50% and thus decrease energy requirements, ... as well.[1] They are limited in size by width and depth of the river as well as the height of bridges spanning the river.

While a ferryboat is often used to cross a river, a riverboat is used to travel along the course of the river, while carrying passengers and cargo, or both, for revenue. (Vessels like 'Riverboat casinos' are not considered here as they are essentially stationary).

The significance of riverboats is dependent on the number of navigable rivers and channels as well as the condition of the road and rail network. Generally speaking, riverboats provide slow but cheap transport especially suited for bulk cargo and containers.

Contents

History

As early as 20,000 BC people started fishing in rivers and lakes using rafts and dugouts. Roman sources dated 50 BC mention extensive transportation of goods and people on the river Rhine. Upstream, boats were usually powered by sails or oars. In the Middle Ages, towpaths were built along most waterways to use working animals or people to pull riverboats. In the 19th century, steamboats became common.

Model of an early 20th century shallow draft stern wheel riverboat, the Upper Sacramento River Steamer Red Bluff.

The most famous early riverboats were on the rivers of the midwestern and central southern United States, on the Mississippi, Ohio and Missouri rivers in the early 19th century. Out west, riverboats were common transportation on the Colorado, Columbia, and Sacramento rivers.

Australia has a history of Riverboats. Australia's biggest river, The Murray, has an inland port called Ecuha. Many large riverboats were working on the Murray, but now lack of water is stopping them. This may be caused by Global warming and over use of water for irrigition. The Kalgan River, in Western Australia is one of the oldest rivers in the world, it has had two main riverboats. The Silver Star, 1918 to 1935, would lower her funnel to get under the low bridge. Today, the Kalgan Queen riverboat takes tourists up the river to taste the local wines. She lowers her roof to get under the same bridge.

It is these early steam-driven river craft that typically come to mind when "steamboat" is mentioned, as these were powered by burning wood, with iron boilers drafted by a pair of tall smokestacks belching smoke and cinders, and twin double-acting pistons driving a large paddlewheel at the stern churning foam. This type of propulsion was an advantage as a rear paddlewheel operates in an area clear of snags, is easily repaired, and is not likely to suffer damage in a grounding. By burning wood, the boat could consume fuel provided by woodcutters along the shore of the river. These early boats carried a brow (a short bridge) on the bow, so they could head in to an unimproved shore for transfer of cargo and passengers.

Modern riverboats are generally screw (propeller) driven, with pairs of diesel engines of several thousand horsepower.

Modern Riverboats

Many of the riverboats shown below were operating on the Yangtze (Chang Jiang) river.

Advertisements

Luxury tourist transport

Some large riverboats are comparable in accommodation, food service, and entertainment to a modern oceanic cruise ship. Tourist boats provide a scenic and relaxing trip through the segment they operate in.

On the Yangtze River, they typically employ staff for double duties: both as serving staff and as evening-costumed dancing entertainers.

Smaller luxury craft (without entertainment) operate on European waterways - both rivers and canals, with some providing bicycle and van side trips to smaller villages.

High speed passenger transport

High speed boats such as those shown here had a special advantage in some operations in the free running Yangze. In several locations within the three gorges one way travel was enforced through fast narrows. While less maneuverable and deeper draft vessels were obliged to wait for clearance these high speed boats were free to zip past waiting traffic by running in the shallows.

Local and low cost passenger transport

Smaller riverboats are used in urban and suburban areas for sightseeing and public transport. Sightseeing boats can be found in Amsterdam, Paris, and other touristic cities where historical monuments are located near water.

The concept of local waterborn public transport is known as Water taxi in English-speaking countries , vaporetto in Venice, water/river tramway in former Soviet Union and Poland (although sightseeing boats can be called water tramways too). Local waterborn public transport is similar to ferry.

The transport craft shown below is used for short distance carriage of passengers between villages and small cities along the Yangtze, while Larger craft are used for low cost carriage over longer distance, without the fancy food or shows seen on the tourist riverboats. In some cases the traveller must provide their own food.

Goods transport

Multimodal

CargoRiverboat.jpg

Roads through this region are inadequate for heavy truck transport and roads along the river are extremely dangerous. As the major rivers are mostly east-west, most railroad transport is typically north-south.

Here, a drive/on drive/off ramp barge is used to transport trucks. In many cases the trucks transported are new and are being delivered to customers or dealers. Perhaps unique to China, the new trucks observed traveling upstream were all blue, while the new trucks traveling downstream were all white.

Bulk cargo

Riverboat used for bulk cargo transport

Low value goods are transported on rivers and canals worldwide, since slow speed barge traffic offers the lowest possible cost per ton mile and the capital cost per ton carried is also quite low compared to other modes of transport

History

SS Inlander on the Skeena River at Kitselas Canyon, 1911

Terrace, British Columbia, Canada, celebrates "Riverboat Days" each summer. The Skeena River passes through Terrace and played a crucial role during the age of the steamboat. The first steam-powered vessel to enter the Skeena was the Union in 1864. In 1866 the Mumford attempted to ascend the river but was only able to reach the Kitsumkalum River. It was not until 1891 that the Hudson's Bay Company sternwheeler the Caledonia successfully negotiated through the Kitselas Canyon and reached Hazelton. A number of other steamers were built around the turn of the century, in part due to the growing fish industry and the gold rush.[2]

WT Preston, a museum ship that was once a specialized river dredge, also called a "snagboat."

See also

A riverboat on the Willamette River
In some regions, such as northern Russia, the rivers freeze in winter. The riverboats stay in the "ice prison". The port of Kazan, late March.

References

  1. ^ Composite riverboat decreases energy requirements, costs, ...
  2. ^ Pioneer Legacy - Chronicles of the Lower Skeena River - Volume 1, Norma V. Bennett, 1997, ISBN 0-9683026-0-2

Advertisements






Got something to say? Make a comment.
Your name
Your email address
Message