A rotation is a movement of an object in a circular motion. A twodimensional object rotates around a center (or point) of rotation. A threedimensional object rotates around a line called an axis. If the axis of rotation is within the body, the body is said to rotate upon itself, or spin—which implies relative speed and perhaps freemovement with angular momentum. A circular motion about an external point, e.g. the Earth about the Sun, is called an orbit or more properly an orbital revolution.
Contents 
Mathematically, a rotation is a rigid body movement which, unlike a translation, keeps a point fixed. This definition applies to rotations within both two and three dimensions (in a plane and in space, respectively.) A rotation in threedimensional space keeps an entire line fixed, i.e. a rotation in threedimensional space is a rotation around an axis. This follows from Euler's rotation theorem.
All rigid body movements are rotations, translations, or combinations of the two.
A Rotation is simply a progressive radial orientation to a common point. That common point lies within the axis of that motion. The axis is 90 degrees perpendicular to the plane of the motion. If the axis of the rotation lay external of the body in question then the body is said to Orbit. There is no fundamental difference between a “rotation” and a “orbit” and or "spin". The key distinction is simply where the axis of the rotation lay, either within or without a body in question. This distinction is and can be demonstrated in and for both “ridged” and “non ridged” bodies.
If a rotation around a point or axis is followed by a second rotation around the same point/axis, a third rotation results. The reverse (inverse) of a rotation is also a rotation. Thus, the rotations around a point/axis form a group. However, a rotation around a point or axis and a rotation around a different point/axis may result in something other than a rotation, e.g. a translation.
Rotations around the x, y and z axes are called principal rotations. Rotation around any axis can be performed by taking a rotation around the x axis, followed by a rotation around the y axis, and followed by a rotation around the z axis. That is to say, any spatial rotation can be decomposed into a combination of principal rotations.
In flight dynamics, the principal rotations are known as yaw, pitch, and roll (known as TaitBryan angles). This terminology is also used in computer graphics.
In astronomy, rotation is a commonly observed phenomenon. Stars, planets and similar bodies all spin around on their axes. The rotation rate of planets in the solar system was first measured by tracking visual features. Stellar rotation is measured through Doppler shift or by tracking active surface features.
This rotation induces a centrifugal acceleration in the reference frame of the Earth which slightly counteracts the effect of gravity the closer one is to the equator. One effect is that an object weighs slightly less at the equator. Another is that the Earth is slightly deformed into an oblate spheroid.
Another consequence of the rotation of a planet is the phenomenon of precession. Like a gyroscope, the overall effect is a slight "wobble" in the movement of the axis of a planet. Currently the tilt of the Earth's axis to its orbital plane (obliquity of the ecliptic) is 23.45 degrees, but this angle changes slowly (over thousands of years). (See also Precession of the equinoxes and Pole star.)
While revolution is often used as a synonym for rotation, in many fields, particularly astronomy and related fields, revolution, often referred to as orbital revolution for clarity, is used when one body moves around another while rotation is used to mean the movement around an axis. Moons revolve around their planet, planets revolve about their star (such as the Earth around the Sun); and stars slowly revolve about their galaxial center. The motion of the components of galaxies is complex, but it usually includes a rotation component.
A Rotation is simply a progressive radial orientation to a common point. That common point lay within the axis of that motion. The axis is 90 degrees perpendicular to the plane of the motion. If the axis of the rotation lay external of the body in question then the body is said to Orbit. There is no fundamental difference between a “rotation” and a “orbit”. The key distinction is simply where the axis of the rotation lay, either within or without a body in question. This distinction is and can be demonstrated in and for both “ridged” and “non ridged” bodies.
Most planets in our solar system, including Earth, spin in the same direction as they orbit the Sun. The exceptions are Venus and Uranus. Uranus rotates nearly on its side relative to its orbit. Current speculation is that Uranus started off with a typical prograde orientation and was knocked on its side by a large impact early in its history. Venus may be thought of as rotating slowly backwards (or being "upside down"). The dwarf planet Pluto (formerly considered a planet) is anomalous in this and other ways.
The speed of rotation is given by the angular frequency (rad/s) or frequency (turns/s, turns/min), or period (seconds, days, etc.). The timerate of change of angular frequency is angular acceleration (rad/s²), This change is caused by torque. The ratio of the two (how heavy is it to start, stop, or otherwise change rotation) is given by the moment of inertia.
The angular velocity vector also describes the direction of the axis of rotation. Similarly the torque is a vector.
According to the righthand rule, the direction away from the observer is associated with clockwise rotation and the direction towards the observer with counterclockwise rotation, like a screw.
A Rotation is simply a progressive radial orientation to a common point. That common point lay within the axis of that motion. The axis is 90 degrees perpendicular to the plane of the motion. If the axis of the rotation lay external of the body in question then the body is said to Orbit. There is no fundamental difference between a “rotation” and an “orbit” and/or "spin". The key distinction is simply where the axis of the rotation lay, either within or without a body in question. This distinction is and can be demonstrated in and for both “ridged” and “non ridged” bodies.
In flight dynamics, the principal rotations are known as pitch, roll and yaw. The term rotation is also used in aviation to refer to the upward pitch (nose moves up) of an aircraft, particularly when starting the climb after takeoff.
Many amusement rides provide rotation. A Ferris wheel has a horizontal central axis, and parallel axes for each gondola, where the rotation is opposite, by gravity or mechanically. As a result at any time the orientation of the gondola is upright (not rotated), just translated. The tip of the translation vector describes a circle. A carousel provides rotation about a vertical axis. Many rides provide a combination of rotations about several axes. In ChairOPlanes the rotation about the vertical axis is provided mechanically, while the rotation about the horizontal axis is due to the centripetal force. In roller coaster inversions the rotation about the horizontal axis is one or more full cycles, where inertia keeps people in their seats.
Rotation, usually called spin, plays a role in many sports. Topspin and backspin in tennis. English, follow and draw in billiards and pool. Curve balls in baseball and spin bowling in cricket. Table tennis paddles are specialized to allow players to spin the ball as they hit it.
Rotation f. (genitive Rotation, plural Rotationen)
Rotation is the movement of an object in a circular motion.
A twodimensional object rotates around a center (or point) of rotation. A threedimensional object rotates around a line called an axis. If the axis of rotation is within the body, the body is said to rotate upon itself, or spin— which implies relative speed and perhaps freemovement with angular momentum. A circular motion about an external point (for example the Earth around the Sun) is called an orbit or more properly orbital revolution.
Contents 
Rotation around a point in one plane can be in a clockwise direction or an anticlockwise direction.
In flight dynamics, the principal rotations are known as pitch, roll and yaw. The term rotation is also used in aviation to refer to the upward pitch of an aircraft, particularly when starting the major climb for takeoff.
Many amusement rides provide rotation. A Ferris wheel and observation wheel have a horizontal central axis, and parallel axes for each gondola, where the rotation is opposite, by gravity or mechanically.
Rotation, usually called spin, plays a role in many sports. Topspin and backspin in tennis. English, follow and draw in billiards and pool. Curve balls in baseball and spin bowling in cricket. Table tennis paddles are specialized to allow players to spin the ball as they hit it.
