The Full Wiki



More info on SR-N1

SR-N1: Wikis


Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.

Encyclopedia

Updated live from Wikipedia, last check: June 04, 2012 10:33 UTC (42 seconds ago)
(Redirected to SR.N1 article)

From Wikipedia, the free encyclopedia

The Saunders-Roe SR.N1 ("Saunders-Roe Nautical 1") was the first practical hovercraft.

SRN1 General Arrangement

It was designed by Christopher Cockerell and built by Saunders-Roe on the Isle of Wight under the auspices of the National Research and Development Corporation (NRDC). Powered by an Alvis Leonides radial piston engine that drove a lift fan, and using ducted air from the fan for propulsion, it first flew on 11 June 1959 in front of the assembled press showing its capability to cross both land and water.

On 25 July 1959, the 50th anniversary of Louis Blériot's cross-channel flight, the SR.N1 crossed the English Channel from Calais to Dover in just over two hours. The crew were Captain Peter Lamb (pilot), John Chaplin (navigator) and Christopher Cockerell, the inventor of the momentum curtain as applied to the hovercraft principle.[1]

The SR.N1 later had a flexible skirt added in 1961 which greatly improved the effective depth of the air cushion. The following year an aft-facing Bristol-Siddeley Viper III jet engine, mounted on the rear of the decking behind the lift fan housing, supplemented the ducted-air propulsion produced by the piston engine, increasing the craft's maximum speed from 35 to 50 knots. The Viper installation followed an earlier installation of a Blackburn/Turbomeca Marboré of approximately half the Viper's thrust.

Models of the SR.N1 were available in both die-cast metal form in the Corgi Toys range, and as a 1:72 scale plastic construction kit from Airfix.

The SR.N1 is held by the Science Museum at Wroughton.[2]

External links

References


  • For the locomotive class see SR N1 class

The Saunders-Roe Nautical One (SR-N1) was the first practical hovercraft.

It was designed by Christopher Cockerell and built by Saunders-Roe on the Isle of Wight under the auspices of the National Research and Development Corporation (NRDC). Powered by an Alvis Leonides radial piston engine that drove a lift fan, and using ducted air from the fan for propulsion, it first flew on 11 June 1959 in front of the assembled press showing its capability to cross both land and water.

On 25 July 1959, the 50th anniversary of Louis Blériot's cross-channel flight, the SR-N1 crossed the English Channel from Calais to Dover in just over two hours. The crew were Captain Peter Lamb (pilot), John Chaplin (navigator) and Christopher Cockerell, the inventor of the momentum curtain as applied to the hovercraft principle.[1]

The SR-N1 later had a flexible skirt added in 1961 which greatly improved the effective depth of the air cushion. The following year an aft-facing Bristol-Siddeley Viper III jet engine, mounted on the rear of the decking behind the lift fan housing, supplemented the ducted-air propulsion produced by the piston engine, increasing the craft's maximum speed from 35 knots to 50 kt. The Viper installation followed an earlier installation of a Blackburn/Turbomeca Marboré of approximately half the Viper's thrust.

Models of the SR-N1 were available in both die-cast metal form in the Corgi Toys range, and as a 1:72 scale plastic construction kit from Airfix.

The SR-N1 is held by the Science Museum at Wroughton.[2]

External links

References








Got something to say? Make a comment.
Your name
Your email address
Message
Please enter the solution to case below
12+12=