The Full Wiki

Sodium aluminate: Wikis


Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.


From Wikipedia, the free encyclopedia

Sodium aluminate
Other names Sodium aluminium oxide,
Sodium metaaluminate
Aluminate, (AlO21-), sodium
CAS number 1302-42-7 Yes check.svgY
PubChem 14766
Molecular formula NaAlO2
Molar mass 81.97 g/mol
Appearance white
Density 1.5 g/cm3
Melting point

1800 °C

Solubility in water soluble
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa)
Infobox references

Sodium aluminate is an important commercial inorganic chemical. It works as an effective source of aluminium hydroxide for many industrial and technical applications. Pure sodium aluminate (anhydrous) is a white crystalline solid having a formula variously given as NaAlO2, Na2O · Al2O3, or Na2Al2O4. Commercial sodium aluminate is available as a solution or a solid.
Other related compounds, sometimes called sodium aluminate, prepared by reaction of Na2O and Al2O3 are Na5AlO4 which contains discrete AlO45− anions, Na7Al3O8 and Na17Al5O16 which contain complex polymeric anions, and NaAl11O17, once mistakenly believed to be β-alumina, a phase of aluminium oxide.[1][2]



Anhydrous sodium aluminate, NaAlO2, contains a three dimensional framework of corner linked AlO4 tetrahedra. The hydrated form NaAlO2·5/4H2O has layers of AlO4 tetrahedra joined into rings and the layers are held together by sodium ions and water molecules that hydrogen bond to O atoms in the AlO4 tetrahedra.[3]


Sodium aluminate is manufactured by the dissolution of aluminium hydroxide in a caustic soda (NaOH) solution. Aluminium hydroxide (gibbsite) can be dissolved in 20-25% aqueous NaOH solution at a temperature near the boiling point. The use of more concentrated NaOH solutions leads to a semi-solid product. The process must be carried out in steam-heated vessels of nickel or steel, and the aluminium hydroxide should be boiled with approximately 50% aqueous caustic soda until a pulp forms. The final mixture has to be poured into a tank and cooled; a solid mass containing about 70% NaAlO2 then forms. After being crushed, this product is dehydrated in a rotary oven heated either directly or indirectly by burning hydrogen. The resulting product contains 90% NaAlO2 and 1% water, together with 1% free NaOH.

Reaction of aluminium metal and alkali

Sodium aluminate is also formed by the action of sodium hydroxide on elemental aluminium. The reaction is highly exothermic once established and is accompanied by the rapid evolution of hydrogen gas. The reaction is sometimes written as:

2Al + 2NaOH + 2H2O → 2NaAlO2 + 3H2

however the species produced in solution is likely to contain the [Al(OH)4] ion or perhaps the [Al(H2O)2(OH)4].[4]

This reaction has been proposed as a potential source of fuel for hydrogen powered cars.


In water treatment it is used as an adjunct to water softening systems, as a coagulant aid to improve flocculation, and for removing dissolved silica and phosphates.

In construction technology, sodium aluminate is employed to accelerate the solidification of concrete, mainly when working during frost.

Sodium aluminate is also used in the paper industry, for fire brick production, alumina production and so forth.

Sodium aluminate solutions are intermediates in the production of zeolites.[5]


  1. ^ Identification and characterisation of three novel compounds in the sodium–aluminium–oxygen system, Marten G. Barker, Paul G. Gadd and Michael J. Begley, J. Chem. Soc., Dalton Trans., 1984, 1139 - 1146, doi:10.1039/DT9840001139
  2. ^ Egon Wiberg, Arnold Frederick Holleman (2001) Inorganic Chemistry, Elsevier ISBN 0123526515
  3. ^ The Crystal Structure of Hydrated Sodium Aluminate, NaAlO2·5/4H2O, and Its Dehydration Product, James A. Kaduk, Shiyou Pei, Journal of Solid State Chemistry, 115, 1, 1995, 126-139,doi:10.1006/jssc.1995.1111
  4. ^ Greenwood, Norman N.; Earnshaw, A. (1997), Chemistry of the Elements (2nd ed.), Oxford: Butterworth-Heinemann, ISBN 0-7506-3365-4  
  5. ^ Alan Dyer, (1994),Encyclopedia of Inorganic Chemistry, ed R. Bruce King, John Wiley & Sons, ISBN 0471936200

See also



Got something to say? Make a comment.
Your name
Your email address