Terrestrial Time (TT) is a modern astronomical time standard defined by the International Astronomical Union, primarily for timemeasurements of astronomical observations made from the surface of the Earth.^{[1]} For example, the Astronomical Almanac uses TT for its tables of positions (ephemerides) of the Sun, Moon and planets as seen from the Earth. In this role, TT continues Terrestrial Dynamical Time (TDT),^{[2]} which in turn succeeded ephemeris time (ET).
The unit of TT is the SI second, the definition of which is currently based on the cesium atomic clock,^{[3]} but TT is not itself defined by atomic clocks. It is a theoretical ideal, which real clocks can only approximate.
TT is distinct from the time scale often used as a basis for civil purposes, Coordinated Universal Time (UTC). TT indirectly underlies UTC, via International Atomic Time (TAI).
Contents 
Sometimes times described in TT must be handled in situations where TT's detailed theoretical properties are not significant. Where millisecond accuracy is enough (or more than enough), TT can be summarized in the following ways:
A definition of a terrestrial time standard was adopted by the International Astronomical Union (IAU) in 1976 at its XVI General Assembly, and later named Terrestrial Dynamical Time (TDT). It was the counterpart to Barycentric Dynamical Time (TDB), which was a time standard for Solar system ephemerides, to be based on a dynamical time scale. Both of these time standards turned out to be imperfectly defined. Doubts were also expressed about the meaning of 'dynamical' in the name TDT.
In 1991, in Recommendation IV of the XXI General Assembly, the IAU redefined TDT, also renaming it "Terrestrial Time". TT was formally defined in terms of Geocentric Coordinate Time (TCG), defined by the IAU on the same occasion. TT was defined to be a linear scaling of TCG, such that the unit of TT is the SI second on the geoid (Earth surface at mean sea level). This left the exact ratio between TT time and TCG time as something to be determined by experiment. Experimental determination of the gravitational potential at the geoid surface is a task in physical geodesy.
In 2000, the IAU very slightly altered the definition of TT by adopting an exact value for the ratio between TT and TCG time, as 1 − 6.969290134 × 10^{−10}.^{[9]} (As measured on the geoid surface, the rate of TCG is very slightly faster than that of TT, see below, Relativistic relationships of TT.)
TT differs from Geocentric Coordinate Time (TCG) by a constant rate. Formally it is defined by the equation
where TT and TCG are linear counts of SI seconds in Terrestrial Time and Geocentric Coordinate Time respectively, L_{G} is the constant difference in the rates of the two time scales, and E is a constant to resolve the epochs (see below). L_{G} is defined as exactly 6.969290134 × 10^{−10}. (In 1991 when TT was first defined, L_{G} was to be determined by experiment, and the best available estimate was 6.969291 × 10^{−10}.)
The equation linking TT and TCG is more commonly seen in the form
where JD_{TCG} is the TCG time expressed as a Julian Date. This is just a transformation of the raw count of seconds represented by the variable TCG, so this form of the equation is needlessly complex. The use of a Julian Date does specify the epoch fully, however (see next paragraph). The above equation is often given with the Julian Date 2443144.5 for the epoch, but that is inexact (though inappreciably so, because of the small size of the multiplier L_{G}). The value 2443144.5003725 is exactly in accord with the definition.
Time coordinates on the TT and TCG scales are conventionally specified using traditional means of specifying days, carried over from nonuniform time standards based on the rotation of the Earth. Specifically, both Julian Dates and the Gregorian calendar are used. For continuity with their predecessor Ephemeris Time (ET), TT and TCG were set to match ET at around Julian Date 2443144.5 (19770101T00Z). More precisely, it was defined that TT instant 19770101T00:00:32.184 exactly and TCG instant 19770101T00:00:32.184 exactly correspond to the International Atomic Time (TAI) instant 19770101T00:00:00.000 exactly. This is also the instant at which TAI introduced corrections for gravitational time dilation.
TT and TCG expressed as Julian Dates can be related precisely and most simply by the equation
where E_{JD} is 2443144.5003725 exactly.
TT is a theoretical ideal, not dependent on a particular realization. For practical purposes, TT must be realized by actual clocks in the Earth system.
The main realization of TT is supplied by TAI. The TAI service, running since 1958, attempts to match the rate of proper time on the geoid, using an ensemble of atomic clocks spread over the surface and low orbital space of the Earth. TAI is canonically defined retrospectively, in monthly bulletins, in relation to the readings that particular groups of atomic clocks showed at the time. Estimates of TAI are also provided in real time by the institutions that operate the participating clocks. Because of the historical difference between TAI and ET when TT was introduced, the TAI realization of TT is defined thus:
Because TAI is never revised once published, it is possible for errors in it to become known and remain uncorrected. It is thus possible to produce a better realization of TT based on reanalysis of historical TAI data. The BIPM has done this approximately annually since 1992. These realizations of TT are named in the form "TT(BIPM08)", with the digits indicate the year of publication. They are published in the form of table of differences from TT(TAI). The latest as of February 2009 is TT(BIPM08).
The international communities of precision timekeeping, astronomy, and radio broadcasts have considered creating a new precision time scale based on observations of an ensemble of pulsars. This new pulsar time scale will serve as an independent means of computing TT, and it may eventually be useful to identify defects in TAI.
Observers in different locations, that are in relative motion or at different altitudes, can disagree about the rates of each other's clocks, owing to effects described by the theory of relativity. As a result, TT (even as a theoretical ideal) does not match the proper time of all observers.
In relativistic terms, TT is described as the proper time of a clock located on the geoid (essentially mean sea level).^{[10]} However,^{[11]} TT is now actually defined as a coordinate time scale.^{[12]} The redefinition did not quantitatively change TT, but rather made the existing definition more precise. In effect it defined the geoid (mean sea level) in terms of a particular level of gravitational time dilation relative to a notional observer located at infinitely high altitude.
The present definition of TT is a linear scaling of Geocentric Coordinate Time (TCG), which is the proper time of a notional observer who is infinitely far away (so not affected by gravitational time dilation) and at rest relative to the Earth. TCG is used so far mainly for theoretical purposes in astronomy. From the point of view of an observer on the Earth's surface the second of TCG passes in slightly less than the observer's SI second. The comparison of the observer's clock against TT depends on the observer's altitude: they will match on the geoid, and clocks at higher altitude tick slightly faster.

