The Full Wiki

More info on USNS Yukon (T-AO-202)

USNS Yukon (T-AO-202): Wikis

Advertisements
  

Note: Many of our articles have direct quotes from sources you can cite, within the Wikipedia article! This article doesn't yet, but we're working on it! See more info or our list of citable articles.

Encyclopedia

From Wikipedia, the free encyclopedia

USNS Yukon in the Pacific Ocean
USNS Yukon in the Pacific Ocean
Career (USA)
Name: USNS Yukon
Namesake: The Yukon River in Alaska
Ordered: 6 October 1988
Builder: Avondale Shipyard, Inc., New Orleans, Louisiana
Laid down: 13 May 1991
Launched: 6 February 1993
In service: 25 March 1994-present
Status: In active Military Sealift Command service
General characteristics
Class and type: Henry J. Kaiser-class oiler
Type: Fleet replenishment oiler
Tonnage: 31,200 deadweight tons
Displacement: 9,500 tons light
Full load variously reported as 42,382 tons and 40,700 long tons (41,353 metric tons)
Length: 677 ft (206 m)
Beam: 97 ft 5 in (29.69 m)
Draft: 35 ft (11 m) maximum
Installed power: 16,000 hp (11.9 MW) per shaft
34,442 hp (25.7 MW) total sustained
Propulsion: Two medium-speed Colt-Pielstick PC4-2/2 10V-570 diesel engines, two shafts, controllable-pitch propellers
Speed: 20 knots (37 km/h)
Capacity: 178,000 to 180,000 barrels of fuel oil and jet fuel
7,400 square feet dry cargo space; eight 20-foot refrigerated container with room for 128 pallets
Complement: 103 (18 civilian officers, 1 U.S. Navy officer, 64 merchant seamen, 20 U.S. Navy enlisted personnel)
Also given as 89 civilian and 3 U.S. Navy personnel
Armament: Peacetime: usually none
Wartime: probably 2 x 20 mm Phalanx CIWS
Aircraft carried: None
Aviation facilities: Helicopter landing platform
Notes: Five refueling stations
Two dry cargo transfer rigs

USNS Yukon (T-AO-202) is a Henry J. Kaiser-class underway replenishment oiler operated by the Military Sealift Command to support ships of the United States Navy.

Yukon, the sixteenth ship of the Henry J. Kaiser class, was laid down at Avondale Shipyard, Inc., at New Orleans, Louisiana, on 13 May 1991 and launched on 6 February 1993. She entered non-commissioned U.S. Navy service under the control of the Military Sealift Command with a primarily civilian crew on 25 March 1994. She serves in the United States Pacific Fleet.

On 27 February 2000, Yukon collided with a smaller civilian cargo ship while entering the port of Dubai in the Persian Gulf.

On 13 July 2000, Yukon collided with amphibious transport dock USS Denver (LPD-9) during a replenishment operation at sea about 180 nautical miles (330 km) west of Hawaii. No one on either ship was injured, and there were no fuel leaks, but Yukon suffered major damage, including several large holes and dents above the water line on her starboard quarter, while a 40-foot (12.2 m) hole was torn in Denver's bow from the second deck to the waterline. The investigation into the accident found Denver responsible.[1] Both ships went to the Pearl Harbor Naval Shipyard at Pearl Harbor, Hawaii, for repairs. Yukon then transited to San Francisco, California, for further repairs at the same time as her scheduled routine overhaul. Yukon returned to service in January 2001.

Notes and references

External links

Advertisements

Advertisements






Got something to say? Make a comment.
Your name
Your email address
Message