Underwater archaeology is the study of past human life, behaviours and cultures using the physical remains found in salt or fresh water or buried beneath water-logged sediment. It is most often considered as a branch of maritime archaeology. Due to the difficulties of accessing underwater sites, the application of archaeology to underwater sites emerged from the skills and tools developed by salvagers, and underwater archaeology initially struggled to establish itself as proper archaeological research.
Underwater archaeological sites consist of wrecks (shipwrecks or aircraft); the remains of structures created in water (such as crannogs, bridges or harbours); refuse or debris sites where people disposed of their waste, garbage and other items by dumping into the water; or places where people once lived, that have been subsequently covered by water due to rising sea levels or other phenomena.
There are many reasons why underwater archaeology can make a significant contribution to our knowledge of the past. Some individual shipwrecks are of significant historical importance either because of the magnitude of loss of life (such as the Titanic) , or circumstances of loss (Housatonic was the first vessel in history sunk by an enemy submarine). Shipwrecks (such as The Mary Rose) can also be important for archaeology because they can form a kind of accidental time capsule, preserving an assemblage of human artifacts at the moment in time when the ship was lost.]].
Sometimes it is not the wrecking of the ship that is important, but the fact that we have access to the remains of it, especially where the vessel was of major importance and significance in the history of science and engineering (or warfare), due to being the first of its type of vessel. The development of submarines, for example, can be traced via underwater archaeological research, via the Hunley which was the first submarine to sink an enemy ship (Hunley also had unique construction details not found in previous vessels and was one of the only historic warships ever raised intact), the Resurgam II, the first powered submarine, and Holland 5, which provides insight into the development of submarines in the British Navy;
Underwater archaeology is often complementary to archaeological research on dry sites because materials are preserved differently under water than on dry sites on land. In anaerobic, cold and dark conditions underneath waterlogged sediments, organics, such as plants, leather, fabric and wood may be preserved as on Hunley and Mary Rose. These materials may still have evidence of how they were worked, such as tool marks on the surface of wood. This evidence can provide new insights into ancient crafts, cultures and lifestyles.
Underwater archaeology is not just about shipwrecks. Changes in sea-level, because of local seismic events, such as the earthquakes that devastated Port Royal and Alexandria, or more widespread climatic or changes on a continental scale mean that some sites of human occupation that were once on dry land are now submerged. At the end of the last ice age the North Sea was a great plain, and anthropological material, as well as the remains of animals such as mammoths are sometimes recovered by trawlers. Also, because human societies have always made use of water, sometimes the remains of structures that these societies built underwater still exist (such as the foundations of crannogs, bridges and harbours) when traces on dry land have been lost.
Underwater sites are inevitably difficult to access, and more hazardous, compared with working on dry land. In order to access the site directly, diving equipment and diving skills are necessary. The depths that can be accessed by divers, and the length of time available at depths, are limited. For deep sites beyond the reach of divers, submarines or remote sensing equipment are needed.
For a marine site, some form of working platform (typically a boat or ship) is needed. This creates logistics problems. A working platform for underwater archeology needs to be equipped to provide for specialist remote sensing equipment, analysis of archaeological results, support for activities being undertaken in the water, storage of supplies, facilities for conservation for any items recovered from the water, as well as accommodation for workers. Equipment used for archaeological investigation, including water dredge and air lifts create additional hazards and logistics issues. Moreover, marine sites may be subject to strong tidal flows or poor weather which mean that the site is only accessible for a limited amount of time.
Underwater sites are often dynamic, that is they are subject to movement by currents, surf, storm damage or tidal flows. Structures may be unexpectedly uncovered, or buried beneath sediments. Over time, exposed structures will be eroded, broken up and scattered. The dynamic nature of the environment may make in-situ conservation infeasible, especially as exposed organics, such as the wood of a shipwreck, are likely to be consumed by marine organisms such as piddocks. In addition, underwater sites can be chemically active, with the result that iron can be leached from metal structures to form concretions. The original metal will then be left in a fragile state. Artifacts recovered from underwater sites need special care.
Visibility may be poor, because of sediments or algae in the water and lack of light penetration. This means that survey techniques that work well on land (such as triangulation), generally can not be used effectively under water.
In addition it can be difficult to allow access to the results of the archaeological research as underwater sites do not provide good outreach possibilities or access for the general public. Work has been done to bridge this difficulty with the excavation of the Queen Anne's Revenge.
Although specialised techniques and tools have been developed to address the challenges of working under water, the archaeological goals and process are essentially the same as in any other context. Investigating an underwater site however, is likely to take longer and be more costly than an equivalent terrestrial one.
An important aspect of project design is likely to be managing the logistics of operating from a boat and of managing diving operations. The depth of water over the site, and whether access is constrained by tides, currents and adverse weather conditions will create substantial constraints on the techniques that can feasibly be used and the amount of investigation that can be carried out for a given cost or in a set timescale. Many of the most carefully investigated sites, including the Mary Rose have relied substantially on avocational archaeologists working over a considerable period of time.
As with archaeology on land, some techniques are essentially manual, using simple equipment (generally relying on the efforts of one or more scuba divers), while others use advanced technology and more complex logistics (for example requiring a large support vessel, with equipment handling cranes, underwater communication and computer visualisation).
Knowing the location of an archaeological site is fundamental to being able to study it. In the open sea there are no landmarks, so position fixing is generally achieved using GPS. Historically, sites within sight of the shore would have been located using transects. A site may also be located by visually surveying some form of marker (such as a buoy) from two known (mapped) points on land. The depth of water at a site can be determined from charts or by using the depth sounding sonar equipment that is standard equipment on ships. Such sonar can often be used to locate an upstanding structure, such as a shipwreck, once GPS has placed the research vessel in approximately the right location.
The type of survey required depends on the information that is needed to resolve archaeological questions, but most sites will need at least some form of topographical survey and a site plan showing the locations of artifacts and other archaeological material, where samples were taken and where different types of archaeological investigation were carried out. Environmental assessment of archaeological sites will also require that environmental conditions (water chemistry, dynamic properties) as well as the natural organisms present on the site are recorded. For shipwrecks, particularly post-industrial age shipwrecks, pollution threats from wreck material may need to be investigated and recorded.
The simplest approach to survey is to carry out three dimensional surveying by divers using depth gauges and tape measurements. Research shows that such measurements are typically less accurate than similar surveys on land. Where it is not practical or safe for divers to physically visit a site, Remotely Operated Vehicles (ROVs) enable observation and intervention with control by personnel located at the surface. The low technology approach of measuring using tape measures and depth gauges can be replaced with a more accurate and quicker high technology approach using acoustic positioning.
Remote sensing or Marine Geophysics is generally carried out using equipment towed from a vessel on the surface and therefore does not require any one, or any equipment to actually penetrate to the full depth of the site. Sensitive sonar, especially side-scan sonar or multi-beam sonar may be used to image an underwater site. Magnetometry can be used to locate metal remains such as metal shipwrecks, anchors and cannons. Sub-bottom profiling utilizes sonar to detect structures buried beneath sediment.
A variety of techniques are available to divers to record findings underwater. Scale drawing is the basic tool of archaeology and can be undertaken underwater. Pencils will write underwater on permatrace, plastic dive slates, or matt laminated paper.
Photography is the mainstay of recording, and with the advent of digital cameras is cheap and convenient. For underwater use, cameras, including video cameras can be provided with special housings that enables them to be used underwater. Low visibility underwater and distortion of image due to refraction mean that perspective photographs can be difficult to obtain. However, it is possible to take a series of photographs at adjacent points and then combined into a single photomontage or photomosaic image of the whole site .
Where intrusive underwater excavation is appropriate, silts and sediments can be removed from an area of investigation using a water dredge or airlift. When used correctly, these devices have an additional benefit in tending to improve the visibility in the immediate vicinity of the investigation. It is also important to note that for very deep sea excavation submarines are sometimes used to view sites. Underwater photography can also be conducted from these submarines which assists the recording process.
A variety of archaeological sciences are used in underwater archaeology. Dendrochronology is an important technique especially for dating the timbers of wooden ships. It may also provide additional information, including the area where the timber was harvested (i.e. likely to be where the ship was built) and whether or not there are later repairs or reuse of salvaged materials. Because plant and animal material can be preserved underwater, archaeobotany and archaeozoology have roles in underwater archaeology. For example, for submerged terrestrial sites or inland water, identification of pollen samples from sedimentary or silt layers can provide information on the plants growing on surrounding land and hence on the nature of the landscape. Information about metal artifacts can be obtained through X-ray of concretions. Geology can provide insight into how the site evolved, including changes in sea-level, erosion by rivers and deposition by rivers or in the sea.
Artifacts recovered from underwater sites need stabilization to manage the process of removal of water and conservation. The artifact either needs to be dried carefully, or the water replaced with some inert medium (as in the case of The Mary Rose). Artifacts recovered from salt water, particularly metals and glass need be stabilized following absorption of salt or leaching of metals. In-situ conservation of underwater structures is possible, but consideration needs to be given to the dynamic nature of the site. Changes to the site during intrusive investigation or removal of artifacts may result in scouring which exposes the site to further deterioration.
Diver trails can be used to allow scuba-divers to visit and understand archaeological sites that are suitable for scuba-diving. Otherwise presentation will typically rely on publication (book or journal articles, web-sites and electronic media such as CD-ROM). Television programmes can attempt to provide an understanding of underwater archaeology to a broad audience.
Publication is an essential part of the archaeological process and is particularly crucial for underwater archaeology, where sites are generally not accessible and it is often the case that sites are not preserved in-situ.
The specialist journals on maritime archaeology, which include the long established International Journal of Nautical Archaeology and the recently launched Journal of Maritime Archaeology publish articles about archaeological research under water. However, research on underwater sites can also be published in mainstream archaeological journals, or thematic archaeological journals.
The public interest market is covered by a number of diving, shipwreck and underwater archaeology books, beginning with the works of Jacques Cousteau.